Ford Super Duty (1999-2016) :: 2004 F250 - Speedometer Quit Working - Stays On 0 And Odometer Stuck
2004 F250 Crewcab 4x4 5.4 automatic.
My speedometer quit working - stays on 0, my odometer stays on 271006.5 miles. Everything lights up, when I do a gauge sweep, the speedometer goes from 0 to full blast then back to zero. On the gauge sweep, my odometer states off all the code stuff like I think it's suppose to.
Anyway, I was lucky enough to get a speeding ticket - driving with the flow of traffic, with the police officer behind me for a mile or more. Pulls me over, explain my speedo just went out, he said he can't let me off but the judge might. So I'm trying to fix prior to a court date.
Here is what I have tried so far.
1. Replaced the VSS in the axle - no change to problem.
2. Replaced the sensors on top of the tranny (2 of them) - no change in problem.
3. Sent the cluster off to a repair shop - they said it worked when it left there shop - no change in problem.
4. Replaced the battery - thought it might have a dead cell. - no change in problem.
5. Unhooked the battery, turned on the headlights, waited 30 minutes, put it back together. (did this probably 5 times) - no change in the problem.
6. Replaced the diff fluid. - no change in problem.
7. Replaced the front left abs sensor on the hub - the existing wire looked like it had rubbed on metal - possible short? - no change in problem.
So far I've just been what seems to be time and money at it with no luck.
Ford Super Duty (1999-2016) :: 2006 F250 - Speedometer Reading Fast
Got a weird one today. Everything was fine all day. Got the old girl smogged this afternoon and made one more quick stop. Got back on the freeway and up to speed and looked down. Speedo said I was 90? Yeah right. I was going with the flow.
So I plugged in my bluetooth ALDL dongle and fired up OBD Link. Well, OBD Link showed normal and accurate speeds. As did a second app on my phone for giving speed. So my VSS must be working correctly.
So my speedo is showing about 25 over actual. When the ignition if off the needle sits between 20 and 25. so did my speedo take a dump? Is there anything else I might try to see if it auto-calibrates?
Ford Super Duty (1999-2016) :: 2006 F250 - Stuck In Park?
I have a 2006 F250 V10 that has this issue most of the time but not all the time. Start her up, foot on brake and the shifter wont move. I use the bypass method to get her moving when this happens. It seems to be doing it more often lately. Also I recently has a cruise control issue. Hit the brake to shut it off and it doesn't stop it! Not sure if the 2 are related. The internet said I need to replace the switch on the master cylinder to fix the cruise control. I got lots of different stories on the park issue.
View 2 RepliesFord Super Duty (1999-2016) :: F250 - ABS And MIL Lights Are On / Code Is P0500 - VSS Malfunction
I've got a 99 F-250 6.8L V10 manual 4WD with no speedometer or odometer. The ABS and MIL lights are on. Code is P0500 - VSS malfunction.
This started when the previous owner hooked up some large LED backup lights to the factory wiring. Something smoked under the dash. He then moved them to a relay-switched +12V feed. He reported that the backup light fuse did not blow.
Ive tested the backup light fuse and the recently replaced VSS. Fuse is good and the VSS tests ok for Ohms and gives AC voltage when the tone ring turns. I pulled the fuse panel, GEM, and PCM. There's no visible damage anywhere there. I'm stumped. Tomorrow, I'll dig for any melted wiring under the dash....
Ford Super Duty (1999-2016) :: 2001 - F250 V10 Transmission Malfunction - Only Goes Into Park / Reverse?
I have a 2001 F250 V10,
So the truck drove fine yesterday had zero issues... I used my auto start as I do every morning in this cold weather, get into the truck and shift from park to drive and its like it does nothing. I can free rev in N,D,1,2. Reverse works great.
I tried switching from 4wd to 2wd, no change. Reverse works just fine. No noises, codes or anything, just doesn't want to engage...
I am assuming I have a 4R100. Could something electrical cause this? I am thinking its mechanical, but hoping someone has ran into this before.
Literally no way I would have known the trans was going bad... It's always worked fine. Tranny fluid is full, I tried unplugging the battery waiting and plugging back in, no dice.
Ford Super Duty (1999-2016) :: 2001 F250 - Speedometer Stopped Working And Overdrive Light Flashing
I have a 2001 F250, 5.4, 4X4. My ignition key stuck in the start position and when I pulled it back to the run position, everything seemed ok. As I started down the road, my speedometer stopped working and my overdrive light was flashing. Also my turn signals had stopped working and my A/C clutch didn't engage. Figured I burnt a fuse. I looked in both the under dash and power distribution box and all seemed well. I checked the fuse for the turn signals/flasher and it was fine. The flashers worked. Thought I might have fried something so I replaced the ignition lock and switch. Also my service engine light came on throwing a code for the vehicle speed sensor.
Looking for solutions on this forum and the internet, I learned that the turn signal switch could have gone bad and the VSS sensor is on the top of the rear dif and an easy fix. Well replaced the sensor but nothing changed. So I went back to the fuse box. Examined every fuse, big and small and I found a 10a with a small space. This was #24 under the dash. From the manual, "#24, 10A, A/C clutch, Blend Door Actuator, Trailer Tow Battery Charge Relay Coil, Four Wheel Anti-Lock Brake System (4WABS), Turn Signal." Replaced it and everything went back to normal. Turn signals work, A/C clutch works, no flashing overdrive light and speedometer works. All from a 10A fuse. If you have any of these symptoms examine all the fuses carefully. There's a 20A fuse for turn/hazard lamps and this other one buried that's only 10A.
Ford Super Duty (1999-2016) :: 2009 F250 V8 Stuck In Park?
My father has a 2009 Ford F-250 Superduty with the 5.4l V8. Two days ago, he frantically woke me up from a nap because he could not get the truck out of park nor are the brake lights turning on when the pedal is pressed. I instantly thought Shift Interlock, did a quick google search and found that it can be the shift interlock or brake light switch on the brake pedal. I have since then replaced both to no avail as well as checking all fuses. I put a multimeter to the brake light switch connector and am getting a steady 10.2v. I am aware there is a bypass switch but that doesn't address the fact that he has no brake lights.
View 9 RepliesFord Super Duty (1999-2016) :: 2008 F250 - Stuck In Park
My Ford 250 is currently stuck in park, it starts but I can't move the shifter. It sounds like it is a fuse issue from what I have read, but I bought the truck at an auction and I don't have a book. Do the brake or parking brake fuse? And where is it located? I know there is a panel under the hood and under the dash, which fuse to look for. It's a 2008 extended cab gas model.
View 13 RepliesFord Super Duty (1999-2016) :: 2011 F250 - Stuck In Park?
2011 250 run fine when parked it Friday jumped in it Monday morning got a check traction control light on will not shift out of park no break lights replaced break switch all fuses are good.
View 5 RepliesFord Super Duty (1999-2016) :: 2001 F250 - Defrost Stuck / Won't Come Off
My defrost is stuck no matter which way I turn the control it won't come off. It just started doing this today. I think it might be a vacuum leak. When I turn my switch on the pump still clicking whether or not it's pumping.
View 2 RepliesFord Super Duty (1999-2016) :: 2013 F250 - Stuck In Park?
My 2013 F-250 Super-Duty periodically won't start or come out of park. I have tried the ignition trick of tuning it to first position but with no luck. Sometimes I can see the light for the indicating light for being in park flashing on and off rapidly and manage to get it into neutral to start. It appears to be completely random. I potentially happens when I drive it for longer periods or do frequent stops around town.
View 3 RepliesFord Super Duty (1999-2016) :: 2001 F250 - Axle Stuck In Differential
Finally finishing up my 2001 F250SD 4X4 project. Decided to pull down the front axle to replace the dust seals. I've got everything apart including the large knuckle seals. Tried to pull the passenger side axle out but it only moves about an inch to an inch and a half before it stops. Took off the differential cover to look for damage or something obvious but I don't see anything wrong. The axle is moving within the splines of the spider gear but that's it. Stumped and sitting on jacks!
View 14 RepliesFord Super Duty (1999-2016) :: 2001 F250 - Gas Gauge Stuck On Full
So I just got an 01 f250, 5.4. Really loving this truck so far. Noticed as I was driving my gas gauge is stuck at full. One time it randomly dropped down to about half tank where I think it should be, but it jumped back up to full. Anything to suggest trying? I tried nailing a speed bump to knock the float loose at 30 and I'm not sure if it worked. Gauge goes to E when I shut the truck off, but as soon as I turn it on it jumps up to full. Should I try hitting the tank with a mallet?
View 6 RepliesFord Super Duty (1999-2016) :: 2001 F250 - Stuck Brake Pistons
I am a few DAYS into a project changing my ball joints on my 2001 F250SD 4wd.
Latest issue is I can't get the brakes back on. One of the pistons was pressed out making replacing the calipers onto the rotor impossible. Fiddling with things has only made it worse.
The higher piston is stuck extended, and the other piston doesn't even budge.
The truck is our only vehicle, and I have been working on it since Tuesday night. It looked like it was going to be done today, but I can't put it all back together now.
That piston will not move. I've tried opening the bleeder and taking a clamp to it but all I get it a few more drops of fluid, no visible movement.
A while ago it looked like this. I got it to move in a little, but it is firmly stuck.
I'm wondering if I can pull it all the way out and clean/sand polish it. Can I use a quick-clamp on the rubber section of brake line to isolate the calipers so I can pull the piston out without draining all the brake fluid from higher in the system? And what do I do about the other piston that doesn't seem to be moving at all? Grab with big pliers and twist/pull?
Some of us just have a knack for finding layer upon layer of problems on projects...
Ford Super Duty (1999-2016) :: 2003 F250 - Passenger Window Is Stuck Up
03 F250. Passenger window is stuck up. When I have the door panel off, I can feel the motor trying to move up. Won't go down at all. When I connect test light to the plug, it lights up correctly for both up and down. Thought maybe it was the motor so I got a new one but it only tries to go one way. It's like the switch isn't sending the signal for the window to go down even though the plug appears to be getting the correct signal.
I took apart the driver's side switch and nothing looks crimped, bent, etc. From some reading, it sounds like possibly the regulator is bad, does that somehow send a signal back to the switch? Is there a relay or something that could be bad? I find it odd that test light seems to work but when connected to a motor, it doesn't.
Ford Super Duty (1999-2016) :: 2002 F250 - Turn Signal Malfunction Caused By Brake Light Circuit
I'm having a turn signal issue with my '02 F-250 that started this morning out of the blue. Seems that when the signal switch is set for a right hand turn and the brakes are applied, the signal will then become solid, not flash, and then blow the fuse. Evidently something with the brake light circuit is overloading the turn signal circuit and not canceling when the turn signal is activated.
Here are a couple of things I have tried to narrow down the culprit.
1) Left turn signal works fine regardless if the brake lights are operating.
2) Brake light circuit operates fine by itself.
3) Right turn signal works fine but there seems to be a back-feed of power causing the center third brake light as well as the left side rear brake light to flash in unison. If brake lights are then activated, the flash stops and becomes constant thus blowing the fuse.
4) Emergency Hazard lights work perfect but the center third brake light again flashes as well which reverts back to some type of back-feed of power. Also, if brake lights come on, flashing turns to constant light and then blows the fuse again.
I guess my question is,. does this seem like the multi-function switch needs replacing or could this be a relay issue of some sort? I don' think its a ground issue simply because the left turn signal circuit as well as the center brake light circuit are both being breached when the right turn signal is activated. Your thoughts?
2002 F-250 Super Duty 5.4 V8
Ford Super Duty (1999-2016) :: F250 - Pulling A Stuck Tractor Trailer In The Snow
So the other day 2/3/2014 my dad and I went out during the snow storm for the people that needed assistance. That day I pulled a 95' RWD dually with a 4 car open trailer and pushed 4 people from one location. Then after I went to assist the tractor trailer driver. My truck is a 2002 F250 super duty 5.4L with 4:10 gears. I got him unstuck then pulled him a 1/2 mile up a hill.
Pulling a stuck semi out of the snow - YouTube .....
Ford Super Duty (1999-2016) :: 2011 F250 - Manual Button Stuck On Max A/C And Would Not Change
I just bought a 2011 F250 Super Duty 6.2L and the manual A/C buttons were stuck on Max A/C and wouldn't change. I fiddled with every switch on the dash thinking it might be a stuck switch and eventually all the buttons started working. This truck has SYNC, which works fine, and I can't find anything else wrong with the truck.
When the buttons are lit, it blows good and cold, in A/C and Max A/C. The problem I'm having now is that they won't light up at all. Visual inspection shows nothing obvious under the hood, and it has a charge of freon. I drove and it id working just fine, but stuck on the Max setting. I'm thinking electrical gremlins, like stuck switch or a relay...
Ford Super Duty (1999-2016) :: 2003 F250 - Fuel Level Stuck At Below Empty - CEL On
My '03 V10 F250 gas with 135k miles on it went from showing weird fuel levels last week, showing low when I just put $40 in it to now being absolutely below empty, pegged as far south as it can get. I have a CEL light on too but my OBD test shows, "N/A 01-01". So all I can think is that there may be an open/short circuit that the OBD cannot diag.
I replaced my fuel pump about 2 years ago with a replacement AutoZone unit and all had been fine since then. I just do not remember if the fuel level sensor was part of the pump itself or a separate item. If it's a integral part of the pump I should be able to go back to AutoZone and get a warranted replacement.
Is there anything I can test a forehand before either pulling the tank or doing a dump-truck again?