Ford Super Duty (1999-2016) :: Adding Fog Lights To 2012 F250 XLT?
I read in a thread about how fog lights need the auto light sensor or something in the kit to be installed and flashed.
My truck is a 2012 f250 XLT that I bought left over from a podunk town IN illinois. It does not have fog lights but it Does have automatic head lamps. So Im very confused on what kit to order to add fog lights to my truck.
Ford Super Duty (1999-2016) :: 2008 F350 - Adding OEM Fog Lights?
Have an 08 f350 xl and was looking to put oem foglights into the bumper where mine has the block out 's, guess what I am asking is if the wiring is already there as it was on a different vehicle I owned ,basically it was a plug and play ,have only had the truck for a week and with the hours I'm working I really haven't had a chance to crawl under and look for the wiring.
View 3 RepliesFord Super Duty (1999-2016) :: Adding LED Lights To Dome Light Wiring
I would like to add an LED light to each running board and tie it in with the dome light wiring so that when the door(s) are opened it will come on with the dome light and light up the factory running board. Any info on where a good place to splice into the wiring, and will the wiring be able to handle a couple extra lights?
The truck is a 2012 F-350 XL, SD Dually....
Ford Super Duty (1999-2016) :: Adding Running Lights To Step Bars?
I am a trucker at heart and I like to add running lights to my running board / step bars. As far as installation of the lights, done it several times, no problem there. However in the past, I have just ran a wire back to the trailer plug and used a scotch lock / snap connector to feed the running board lights.
If I do the same on a 2012, will that cause havick with the computer? Most likely I will be running 7 lights, all 3/4" diameter LED style. If this isn't' the best solution, then where to get power for marker lights.
Ford Super Duty (1999-2016) :: 2006 F250 XLT - Adding OEM Automatic Lights
I recently purchased an 06 F250 XLT Crew Cab. I want to add the factory automatic headlights to it. Is there anymore to it than the photocell and the light switch that I need to make it all function? I'm adding the factory driving lights and getting the automatic headlight switch with the driving light option. I tried the search function but came up empty.
View 12 RepliesFord Super Duty (1999-2016) :: F250 - Day Time Running Lights - Adding LEDs
Looking for some info on wiring up some Day Lights Running Lights on a 2016 F250 with diesel engine? Thinking of adding LED lights to front of vehicle for day time use.
View 13 RepliesFord Super Duty (1999-2016) :: 2004 - Front Wheel Hub Stock?
I have a 2004 F250, CCSB, 6.0L, Fx4, Lariat.
I am trying to replace the passenger side front hub. I either have a bad hub, or I am not installing it properly. I have it installed with the locking hub unlocked and trying to turn the hub, the entire passenger side axle spins. It is also very hard to turn it. I strapped axle, and the hub is almost impossible to turn, with or with out the actual hub installed.
This is the second hub that I installed with the same results. I''m not ruling out bad out of the box, but it is the second one I installed today.
Ford Super Duty (1999-2016) :: 2004 - Stock Manual Hub Removal?
I'm replacing the passenger side manual hub on my '04 F250. I did a brake job last year and I'm sure I cleaned/inspected/lubed the hubs. I can't seem to get this one out. I have the snap ring out and with a rubber mallet, I can get it wiggle just a little. I've loaded up around where the snap ring went with penetrating oil.
Am I missing something? It's just a snap ring and the hub should just pull out, right?
Ford Super Duty (1999-2016) :: Adding Running Lights After Some Pop Up Noise Now No Turn Signals / Hazard / Brake Light?
I was adding some more running lights today and tried to tie in to the front running/turn signal light. Next thing I know I hear a pop and now no turn signals, hazards or brake lights on my 99 F250 SD V10. My 3rd (center) brake light does work though when I press the brake, it's just the tail brake lights that dont work.
I can't find a blown fuse for the turn signals or brake lights (not really sure which fuse box it's in since the manual doesn't tell me what fuse is what)
I however did find what I'm guessing are the flashers behind the radio. What might have went wrong where before I start dumping money in to flashers and relays.
The next question is, can I jump in to the marker/turn signals and add another single LED light to them off the front? If I can which color wire does what?
Ford Super Duty (1999-2016) :: 2003 - Restoration Of Stock Rim?
I like the stock rims on my 03 Super, any success story about this type of rim refurbishing? Or cleaning them up? Something like stripping all that chrome plating off them for a flat universal look? Nothing fancy.
View 1 RepliesFord Super Duty (1999-2016) :: 2015 - 35/12.5 Fit On Stock 17 Wheel?
Recently bought a 2015 f250 xlt.....very impressed with it. Only thing is the wheel feel and look to small. What is the largest size i can run stock? Will 35/12.5 fit on stock 17 wheels or should i just spring for aftermarket rims at the same time? Also exhaust options for the 6.2? Remember, i need load range e!
View 4 RepliesFord Super Duty (1999-2016) :: Adding Extra Set Of Wheels?
I am trying to get an extra set of wheels for my truck before we move back to Alaska to mount my studs on next winter. I have found a few used sets but then realized I have the tire pressure sensors on my truck. If I pick up a set, do I have to get ones with the sensors? Can sensors be added to the tire shop? I just really have no intel on this subject!
View 8 RepliesFord Super Duty (1999-2016) :: Adding Cruise Control?
My 1999 SD was originally a Work Truck without cruise. I'd like to add cruise of some sort (factory or after market), but also trying to keep the cost and difficulty factors low.
Have any of you SD drivers ever done this and if so, what you went through?
Ford Super Duty (1999-2016) :: 2000 - Adding SPD Y Pipe?
I want to put in a SPD Y pipe. They make 2 different ones, 99-00 and 00-04. I have a 2000 and so I've been trying to figure out which one. The SPD website's phone number goes straight to voice mail and it's inbox is full. 5 star tuning who sell's these as well told to me to just "get under the truck and see"... I'm no exhaust pro so I don't know what to look for. I just went to a ford dealership and their diagrams where the same but it did show there were different part numbers for the two different styles, so they couldn't work either. It says on SPD's website that the exhaust configuration changed somewhere in 2000. So, what to look for in the difference. Maybe a picture of a 99 y pipe and 01 y pipe would work?
View 11 RepliesFord Super Duty (1999-2016) :: 6.2 - Adding Flowmaster Hushpower
Putting a FLowmaster Hushpower on a 6.2 super duty? I have the muffler out now and hate the sound it makes at 2.5 rpm. Just wondering if it gives a deep tone and if it works for the drone sound in the cab.
View 5 RepliesFord Super Duty (1999-2016) :: Adding OEM Rear Overload Springs?
I would like to add rear overload leaves to my 2016 F250 that for some reason I didn't order with the camper prep package. From what my internet research tells me I will need to add the frame tabs and rubber bumpers, the overload leaves themselves, and of course longer U bolts.
My question is, in all of the pictures I can find, there in an intermediate spacer block between the regular leaf pack and the overload leaf. I can find a part number for this block ( 2C3Z-5594-AA ) only for 2002-2007 trucks. The parts diagrams I've seen online at various Ford sites don't list a part number for this block on current model trucks. Most just give a single part number for the whole leaf pack.
For 2014-2016 F250 with the camper package, or an F350 know what part numbers I might be looking for? Do the newer model year trucks still use an intermediate spacer block? Any chance someone with one of the aforementioned vehicles can post a picture of what the overload leaf setup looks like on a new(er) truck?
I would assume if you snap an overload leaf you can get a replacement from Ford, so why can't I find a part number for them either? I'm pretty sure I will have overloads built at a local spring shop anyway, but at least want to make sure I'm matching the correct and current factory setup.
Ford Super Duty (1999-2016) :: 2012 - Adding Remote Start?
I've got a 2012 XLT that I would like to add remote start to because I'm tired of getting into a truck that feels like a freaking oven.
From what I see on Ford's site, looks like this should work:
[URL]
Are there any aftermarket systems I should be considering?
Ford Super Duty (1999-2016) :: F350 - Adding Second Backup Camera?
I would like to add a second backup camera to my 2016 F-350 Super Duty to assist when hooking up to my fifth wheel. It is a Crew Cab with the Factory Tonneau Cover so my view of the hitch is blocked. I would like to add the third brake light high mount camera and be able to toggle between my OEM/Tailgate Camera and the High Mount. I have found a couple that claim they will work but both require tapping into the main connector on the back of the display, but not quite sure how to open it up. Accessing the connector is not a problem, just getting it apart without breaking it is the question. The "Lockpick" system has not been tested/certified for the 2016 model.
View 3 RepliesFord Super Duty (1999-2016) :: 2015 - Got DEF Light Warning After Adding 2 1/2 Gal?
Had the DEF 500 mile warning come on last week. Second time for this. First time early on when it was new. Put a 2 1/2 gal. container of Blue DEF then and all was well. This time I did the same thing but keep getting the 500 mile warning afterwards. Cancelled the warning a couple of times , and now I am getting a warning that I have 378 miles left on the DEF fluid remaining. Its like the truck didn't recognize me adding the 2 1/2 gal. Also the check eng. light is on now. Thinking thats related. 7,000 mile on truck
View 3 Replies