Ford - Ranger :: 2002 - High Pitch Squeal When Push On Accelerator
2002 Ford Ranger 6 cylinder Manuel Drive, whenever you push on the accelerator makes a high pitch squeal. Changed Idler pulley and belt, No luck.
View 3 RepliesSanta Fe (DM - 2013+) :: Ventilation Fan High Pitch Noise / Squeal
Yesterday I heard a high-pitch noise/squeal coming from the vehicle and after some searching, figured out it was from the ventilation fan. It went away after 5 mins of being on but is rather annoying. Not too keen to take it in as I'm sure the dashboard will need to be removed and afraid it won't go back in perfectly.
View 7 RepliesFord Super Duty (1999-2016) :: 2011 - Whining And High Pitch Squeal Sound?
I have a 2011 F-350 Diesel. It started making a strange whining sound when I start it in the morning. Very random and only does it when it's 0- -4 c. Took it to the dealership and they said its the cooler fan clutch. Got it replaced yesterday, and this morning I started it up and the whining sound was back. It also had a weird vibrating sound. What it could be?
View 10 RepliesFord Super Duty (1999-2016) :: F250 - High Pitch Squeal From Driver Side
So today pulling out of the gas station I turned my steering wheel to the left and I heard a high pitch squeal from the drivers side. It wouldn't do it again unless I was just creeping, nothing going down the road. I did a few searches on here but they all are if the truck is moving say 30 mph or better. I know I need to replace my ball joints. 99 F250, V10, 4X4, extended cab.
View 8 RepliesFord Ranger / B-Series :: Wheel Bearing Noise At Around 50 MPH
So my ranger was having a textbook wheel-bearing noise at around 50mph....when I turned to the right the noise went away implicating a passenger side wheel bearing.
So I replaced both of the hub bearings on the pass side and noticed that the front axle shaft u-joint right behind the spindle was really bad and was going to change it but couldn't get the spindle off so I said screw it.
Took it for a drive and the noise is still there. Could a worn u-joint possible replicate a wheel bearing noise? I am used to them making a clicking/popping noise while turning when they're bad, but not a whirring sound.
1993 ranger 4x4 manual locking hubs.
Celica :: 1996 Toyota SX Making High Pitch Rattling Noise When Start It
i have a 96 toyota celica sx which makes a horrible noise when i start it, its almost like a high pitch rattling noise, usually goes away when it warms up but sometimes still making it accelerating, think the noise is coming from area which is in the photo, what it is?
View 7 RepliesFord 6.0L Power Stroke Diesel :: Loud High Pitch Squeal At Idle
Yesterday my truck started making a loud high pitch squeal at idle. Messing with it this morning I found when I turn the a/c on it quits. Then it will do it for a second at startup and quit. If the a/c system is turned off it comes back. I thought exhaust leak until I found the a/c link.
View 9 RepliesFord Ranger / B-Series :: Loud Speed Dependent Noise - Bad Wheel Bearing?
I have an 01 Ranger 4x4 that recently started to make a loud speed dependent noise from the drivers side front wheel, a quick jab to the right on the steering wheel and it stops, straiten out and it comes back...since I know my shocks are worn and have some cupping on the front tires my first thought was tire noise so I moved the back tire which is evenly worn to the front and no change, next I removed the tire and checked everything visually.
All seems ok, the brake does not seem to be dragging and there is no evidence of a cv problem, everything seems tight, so I'm guessing the problem is a bad wheel bearing? If I grab the tire at 12 and 6 there seems to be excessive movement from top to bottom, there should be none right? If memory serves any movement is indicative of bad wheel bearings? I guess I'm looking for some vindication before getting a new hub?
Ford 6.0L Power Stroke Diesel :: 2005 - High Pitch Squeal / Turbo Has Been Sticking After Hard Acceleration
For a month or two now my truck has been making a squeal and the turbo has been sticking after hard acceleration. The sticking was a woebegone unison ring and I was hoping the squeal would be resolved when I cleaned the turbo but it didn't, in fact, it got worse.
It used to be occasionally and go away after warming up, but now it's more constant than not. It goes away when the VGT does its idle cycle and once you get up to speed.
Here's the sound - YouTube.....
Santa FE SM (2001-06) :: High Pitch Squeal In Rear Brakes
Just replaced pads, rotors, caliper hardware, e-brake shoes and hardware and rear wheel bearing assembly on 2006 Santa Fe. Still get a high pitch sound after the car warms up in 5-10 miles. Sound is intermittent and gets somewhat louder as you drive.
View 2 RepliesPassat (B5) :: High Pitch Squeal From Front Brakes Mostly When Cold Or Wet
2002 Passat wagon. I recently had my independent VW shop install new front and rear brake pads and rotors that I provided. The pads are PBR Axis Deluxe ceramic pads. Soon after, the front brakes started a high pitch squeal - mostly when cold or wet.
I took it back to the mechanic and he told me there is nothing he can do about it - I must have defective pads and that maybe they are covered under warranty, as they certainly need to be replaced, ...
This shocked me, especially the lack of customer service, but because I provided the pads I don't think I have much leverage with them other than not to do business with them again.
Is there any way to quiet a squeaking brake pad? Might the mechanic not done something he should have done to prevent squeaks?
Ford Ranger / B-Series :: 2004 - Lifter Making Tap Noise
2004 auto ranger 120k miles
When I bought it there was a lifter making a tap tap tap. Its not all the time or consistent which makes me feel its a failed lifter as opposed to a rocker arm that is loose. Ive tried the "stuff" in the oil. Seafoam, marvel mystery, etc with no luck. So this coming winter Im going to break it down and replace the lifter.
First question. I havent put a stethoscope on it or used the "hose to ear" method to track down which one it is. Im pretty sure its the right bank in the front. Will it be obvious which one it is when I get it broken down?
Next. At 120k miles should I be worried about the other lifters? Ive never had one fail on anything I own and hardly ever hear them on other cars. I pretty much thought that hydraulic lifters were failproof anymore. Should I be worried about the others?
Next next, do I need to be worried about damage to the pushrod and or rocker arm? Should I be prepared to replace those as well? Finally anything else to be concerned about or consider?
Ford Super Duty (1999-2016) :: Rear Wheel Bearing Making Noise
Have a rear wheel bearing making some noise. A friend told me that it is always the outer bearing that goes first . Can you replace the bearing without replacing the race?
View 14 RepliesFord Ranger / B-Series :: 1994 - Truck Won't Turn Over Just Making Noise Like It Wants To Start
The truck just won't turn over makes a rrrgh rrrgh noice like it wants to start, I push the gas peddle to the floor and I should smell a lot of gas but don't!!! I added oil when it died at the store last night and it started up but the oil stick indicates oil is fine??? Pulled the diode out this morning put it back in the truck would not start just made that noise but turned it off and reseated the diode and it started??? These things may or may not have anything to do with the problem. Could it be electrical or oil pressure gauge sticking or something else that I could tell my mechanic and he could fix so I don't get stuck????
View 14 RepliesFord Ranger / B-Series :: 1999 V6 - Engine Making Sucking Sound Occasionally
My 1999 Ranger with 4.0 EFI V6 engine makes a "sucking sound" occasionally. At first I thought it was a belt slipping, but now I believe it is some kind of intake air leak. If I stop the truck while the sound is on, I can open my driver's door and get to about the front of the hood before the sound stops. I have never been able to observe the engine with the "sucking sound" on. Sometimes the engine will kill when the "sucking sound" stops, if the engine is idling and in gear. If I just keep driving normally, there does not seem to be any permanent problem. What the problem is?
View 4 RepliesFord Ranger / B-Series :: 2003 XLT - Compressor Making A Loud Click Noise Engaging Even Though Not Using Heat Or AC
I have a 2003 ford ranger xlt 4.0L and here recently my ac compressor has been making a loud click noise engaging even though i am not using heat or AC, so when it engages the rpms drop and almost wants to stall and it does this in about 10-15 sec. intervals, but when I am driving it acts fine. What is going on here, I recently had a vacuum leak and i found it and fixed it, and now this issue just started.
View 2 RepliesFord Ranger / B-Series :: 1999 - No High Beam
[URL] ... Looking for info on my 99 Ranger.
Here's what happened,I have an electric plow I hook to my Ranger every year with no problems,except this year. The day after hook-up my wife noticed no high beams, don't know if the two are related but I did nothing but connect the plow wires already in place. Anyway I proceeded to look for a fix, fuses first, replaced both headlights next, blinker/high beam/wiper lever-still no fix and to boot my truck doesn't ding when keys in ignition, four wheel switch doesn't work, & wipers don't work.
Ford Ranger / B-Series :: 1999 - High Idle - ECM?
I have a 99 Ranger w/3.0. It idles about 1500 rpm cold,and 1200 warm. Here are the things that I have tried.
1.Checked ALL vacumn hoses/lines
2.Changed Air idle control sensor
3.Throttle position sensor
4.removed and completely cleaned throttle plate in throttle body.
5. removed top of intake manifold and checked for cracks and/or leaky gasket.
Nothing seems to change. Could it be a faulty ecm?
Ford Ranger / B-Series :: 2002 3.0L Sounds Like Fan Belt Squeal
After about 1 minute after starting the truck it sounds like the fan belt is squealing..(below 30 deg outside) Only its not the fan belt as I replaced it. Does not do it when it is engine is operating temperature. Have checked all of the Pulleys which seem to be all right. The frequency of the squealing sound is about 1/3 the engine RPM and will go away above 2k when it does do it. Stopping at a stop light after about 45 seconds it really starts to get loud. Can a Fan Clutch do this.. I beleive that this engine has a timing chain right?
View 8 Replies