Touareg :: Whooshing Sound When Push Brake Pedal To Move Gear Selector Out Of Park
Last night I jumped into my Treg to move it into my garage. When I pushed the brake pedal to move the gear selector out of park, I heard a whooshing sound. Like the sound of a bellows-type foot pump I use to inflate my dinghy. I could also feel a slight amount of movement in the transmission lock button on the top left side of the shifter when doing this.
Now I'm noticing this noise whenever I apply the brakes. It doesn't appear to affect braking performance, but does have me wondering. I'll have the dealer check this out when I take the Treg in for the recent recall (got my notice yesterday).
Ford Transmission :: 1997 E350 - Hard To Move Gear Selector
I am just about committed to purchasing a 1997 Ford E350 extended cargo van with the 5.4. The transmission shifts through all the gears nice and firm (reverse also works). The only issue with the van is the column selector lever is very hard to move between the entire range of PRND21. It also does not "click" into the selected positions, you have to just line up the pointer to the desired gear selection.
Is this a complete deal breaker (internal transmission issue/replacement necessary) or, is it something relatively simple (such as a worn selector cable). The owner did admit the van has been sitting for sometime. It has 134,000 miles on it.
Ford 7.3L Power Stroke (1999-2003) :: Hold Gear Selector Towards Park To Get Reverse Lights To Come On
I have noticed that I have to hold my gear selector towards park to get the reverse lights to come on. Also some times I have to hold it towards park to get it to start. I changed my tranny in Dec 2009 and occasionally it would do this while starting, just noticed the reverse lights about a week ago. Tried moving the cable where it attaches to the tranny a couple of serrations each direction. No luck. Is there another place I can make an adjustment?
View 14 RepliesFord F-150 (2004-2008) :: Trans Has Delay Engaging When Moving Gear Selector From Park To Either Reverse Or Drive
I have a 2008 F-150. When moving gear selector from park to either reverse or drive, trans has a delay engaging. After engagement, it runs fine, shifts ok, downshifts ok....
View 7 RepliesSanta FE SM (2001-06) :: Park Gear Selector Indicators Not Illuminated
Isn't the park gear selector indicators suppose to me illuminated when you turn on the lights, mine aren't. Why?? stick shift between seats on floor.
View 5 RepliesSonata I45 (YF - 2011+) :: Gear Shift Won't Move Out Of Park
My mom has a 2016 Sonata that recently has started experiencing some issues with the gear shift. A few weeks back my stepdad was not able to get the gear shift to move out of park. Finally, my step brother did get it to go into drive, but then could not get back into park (he could only get into neutral), so my mom took it to have it looked at. While at the dealer someone there was able to get the gear shift to work and we thought everything was okay. That was until today when my stepdad could not get it out of park again. I noticed today that button on the shift knob was fully depressed while in park. I did attempt to use the shift lock release per the instructions in the manual with no luck.
My mom is going to call Hyundai in the morning to see what they can do for her, as the car is parked at minimart right now.
Santa Fe (CM - 2007-12) :: 2011 - Gear Stick Won't Move From Park
I have a Santa Fe Style CRDI Auto from 2011 which is not covered by Warranty and has only done 6000 miles.
The problem is that the Gear Stick Won't Move from the 'Park' position (with the engine on and brake fully pressed down).
There have been issues over the last couple of weeks where it was difficult to move the gear stick at times but it was fine after waiting a few seconds. Now it seems completely stuck.
Lexus RX 2004-09 :: Engine Will Start But Gear Shift Won't Move Out Of Park
I have a 2004 RX with 82,000 miles, well maintained. Lately the engine will start but the warning lights won't go off and the gear shift won't move out of park. I have to keep turning the vehicle on and off until the gear shift will go in reverse.
It doesn't happen every day but off and on over the past month.I've had numerous brake light switches replaced which could maybe be the lights, would that affect the transmission too?
Santa FE SM (2001-06) :: Gear Shifter Very Hard To Move And Doesn't Really Go In Park?
This morning as I get in to drive my kid to school (2005 2.7 2 wd auto) as I go to put it in reverse I noticeably have to pull it with some force. I have never had to "force it" before, it had always switched gears with ease. This time it felt very stiff but had no issues going into gear. After I dropped my son off at school I went through the gears up and down and it felt very stiff (at this point i have no issues with starting it or P).
At lunch I go out to get something to eat and when I go to start it up it won't start. I try and try and nothing. All the lights came on, it's not a battery issue at all (brand new). But after 10 tries it starts, so I'm pretty happy. Then I go to put it in gear (reverse) I can not press in the button on the side of the gear shift. It will not go in. I press with all my might and it wont budge. But again, after about 10 good tries at it goes in and I can then select my gear but still feels very stiff.
After stopping again I didn't shut off the engine and dicked around with the shifter basically figured out that my car is not recognizing Park. On the instrument panel each gear lights up but not P. It gets very stiff when trying to put it in P but it doesn't actually go into P. If I put it in P (or really the further up it will go) and shut off the car, it won't start again. I can start it up in N and only N.
Ford Excursion :: Transmission Selector Difficult To Move
I am looking at a used 2003 X with a 140k miles. The truck is very clean and seems mechanically sound. This will be my third X! The only problem I found is the trans selector is difficult to move. Once driving the trans seems fine. No leaks anywhere. I believe this is cable actuated? Is this something minor or should I run away?
View 14 RepliesCamry :: 2002 - Shifter Physically In Gear But Cluster Indicator Showing Park And Won't Move
So my friends 2002 camry has a problem where she shifts the shifter into drive, but the gear position indicator in the cluster still shows her in park, and the car will still be in park with parking pawl engaged. is this a sensor that went out, or a deeper transmission problem to be dealt with?
View 1 RepliesFord F-150 (2009-2014) :: Transmission Oil Change Now Truck Won't Move
2012 F150 STX 2wd 6spd 100kmi
I just dropped the transmission oil pan and changed the filter. Put a new filter in. 5qt of oil came out, I put 5qt of oil back in. Oil level is right between the A and B hash marks.
I start up the truck and put it in gear and nothing happens. Its like the oil filter dropped and it isnt getting oil. I dont think this is possible because i watched it go in, the oil pan holds it, the seal came out with the old filter and the seal went in with the new one.
Am I missing something here? this oil change went just as well as any other tranny oil change i have done but the thing wont move.
Ford F-150 (2009-2014) :: 2010 - Clunk When First Start To Move?
I am looking at a 2010 f150 4x4 lariat that shifts and drives great a thru all gears and down the highway. The truck makes a clunk whenever you start to move from a dead stop ? go about 5 feet and it runs great? my 07 fx4 has 247,000 miles and still doesn't make any noises, the 10 has 75,000 miles on it ford maintenance oil changes and trans flush, am going to have mech look at it, anyone think of possible items to zero in on? it has the 6 1/2 ft bed with 2 pc driveshaft ...
View 7 RepliesFord 6.0L Power Stroke Diesel :: Unable To Move Selector On Lock Out Hubs
I have a 2003 f250 and I am unable to rotate the hubs from automatic. I have removed them and while I had them apart, I was still unable to rotate the selector. It wouldn't turn even with a crescent wrench putting pressure on it. I repacked them with grease and reinstalled and they still work when in 4 wheel drive. I am just concerned that when the vacuum does go out, I will not get the hubs to manually lock in.
View 10 RepliesFord F-150 (2009-2014) :: 2013 - ECO Computer - Failure To Move At Stop Sign
Failed to start or do anything with 22K miles. Week previous failure to move at stop sign. Stepped on again OK. WEnt on the hook to servicing/purchasing dealer. PCM? Replaced and so far all is good. Now the trans shifts earlier and will go into 6th at 40 in town driving; never went in until 65 on freeway before. Could the replacement part before newer model 14/15? Or maybe not for a MaxTow with 3.73 gears I have? Is it thinking and finding my driving style.
View 5 RepliesFord F-150 (2009-2014) :: 2010 FX4 Won't Always Come Out Of Park
I have 2010 FX4 with 76,000 miles, 5.4L with automatic trans and the console shifter. Problem is, lately it doesn't always want to come out of Park when I try to go somewhere. I know that the brake pedal needs to be pushed in order to release the lock on the shifter. If I pump the pedal a couple of times it seems to release the lock eventually. Is there a brake pressure switch that actuates the lock or a switch on the pedal that needs to be made to release the lock? I have tried to search on here for a fix with no luck.
View 2 RepliesFord F-150 (2009-2014) :: No Power / Will Not Shift Out Of Park
2009 F150 4wd.. I have no - power windows, door locks, radio, blinkers, will not shift out of park, no dome lights. all started last night after it was parked for about an hour the lights flashed on their own and when I went to leave this morning all of this is going on. I have :
- checked fuses - good
- checked for codes - none
Truck runs fine, you have to press the shift lock button to get it out of park,runs like normal.
Ford F-150 (2009-2014) :: 2010 Lariat Won't Shift Out Of Park
I have a 2010 Lariat and it randomly gives me fits by not letting me shift out of park. This started yesterday and I want to know where to start looking so I don't get stranded in BFE! Its a center console shifter.
View 2 RepliesFord F-150 (2009-2014) :: Rough Idle - 049-.053 Park Plug Gap On 5.0?
My truck has a similar rough idle and I decided to investigate. What my plug gap was supposed to be as I didn't have access to my owners manual at the time. The specs I was given (.041-.047) is what I followed and recapped my plugs .045. The idle improved a great deal.
Now I was wondering and finally got around to checking my owners manual after I read somewhere that the gap for the 5.0 changed between 12 and 13 model years. What I found in my owners manual is that the gap I'm supposed to have is from .049-.053. My plugs were out anyway at .057. I will leave them be at .045 but am wondering why the change from .041-.047 on the 2011 model years to .049-.053 on the 2012+ model years? I assume the engine hasn't changed, so am curious of the thought process.