Ford F-150 (2009-2014) :: Rear Running Light And Plate Lamps Out
Looking for a wiring diagram for my 2015 F-150? I have recently lost my running tail lights and licence plate lamps. Visually checked every fuse and found no problems there. I put in LED tail lights a couple weeks ago and they worked fine then noticed one day my tail lights weren't on when headlights were. Front running lights work fine. If I could get a diagram to start tracing wiring back that would be great.
View 14 RepliesFord Super Duty (1999-2016) :: Adding OEM Rear Overload Springs?
I would like to add rear overload leaves to my 2016 F250 that for some reason I didn't order with the camper prep package. From what my internet research tells me I will need to add the frame tabs and rubber bumpers, the overload leaves themselves, and of course longer U bolts.
My question is, in all of the pictures I can find, there in an intermediate spacer block between the regular leaf pack and the overload leaf. I can find a part number for this block ( 2C3Z-5594-AA ) only for 2002-2007 trucks. The parts diagrams I've seen online at various Ford sites don't list a part number for this block on current model trucks. Most just give a single part number for the whole leaf pack.
For 2014-2016 F250 with the camper package, or an F350 know what part numbers I might be looking for? Do the newer model year trucks still use an intermediate spacer block? Any chance someone with one of the aforementioned vehicles can post a picture of what the overload leaf setup looks like on a new(er) truck?
I would assume if you snap an overload leaf you can get a replacement from Ford, so why can't I find a part number for them either? I'm pretty sure I will have overloads built at a local spring shop anyway, but at least want to make sure I'm matching the correct and current factory setup.
Ford F-150 (2009-2014) :: 2012 - Replacing Steel Wheel?
I just inherited a 2012 F150 Fx4 Super Crew. Nice looking truck, but the wheels are stock 17" steel. Need upgrading to nicer looking wheels/wheel covers w/o breaking the bank?
View 14 RepliesCorolla / Matrix 2009-13 :: 2011 LE - Adding Fog Lights And LED For License Plate
I am planning on adding fog lights to my Corolla 2011 LE.
I am considering this one ....
and these LEDs for my license plate ....
Ford F-150 (2009-2014) :: Adding Tailgate Light Bar?
Looking putting on a Putco lightbar on my 2014 Supercrew. It seems I don't have a good surface on the right side the sheet metal has some type to bulge and a rectangle hole.
View 14 RepliesFord F-150 (2009-2014) :: Adding Mirrors With Blinkers
Was wondering if it was possible to add factory mirrors with the blinkers on them to my 2014 xl? My mirrors don't have them and I'd like to have them. If so, I could just buy a set and plug them into a harness in the door?
View 12 RepliesFord F-150 (2009-2014) :: Adding Receiver To A 2013
Might be adding a '13 to the work fleet but it won't have a receiver, when my '09 was rear ended I noticed it looked like the bumper and receiver are more or less all in one. So can just the receiver hitch be added on these or is it a complete bumper replacement?
View 3 RepliesFord F-150 (2009-2014) :: 2010 XLT - Adding A Remote Start
On a 2010 XLT F150 supercrew, how hard would it be to add a remote start to it. I would like a factory type system, especially i can operated my keyless entry. How much am I looking at? and does the truck stay running when you open the door.
View 3 RepliesFord F-150 (2009-2014) :: 2010 - Adding Dual Exhaust?
Looking to put dual exhaust on my 2010 F150. Which muffler. Flowmax or Magnaflow. Do not want it very load. Looking a little smooth churn like the Mustang. As you know ford is very distinctive and I want it to be heard to some degree.
View 14 RepliesFord F-150 (2009-2014) :: 2011 - Adding Keyless Entry?
My 2011 F150 did not come with Keyless Entry so I purchased Fords alternative which is a number pad that sticks to the door above the handle and acts basically like a key fob.cI asked my dealer if I just purchased the new door handles with the keyless built in if they can just add the module to the board and connect it. Faster than I could finish the service Manager said no with out even discussing it. I'd really like to do this if it is somehow possible. My parts guys is going to try and get service to call Ford Tech but he didn't have a lot of faith that they would.
View 2 RepliesFord F-150 (2009-2014) :: 2011 5.0 - Adding Programmer To Increase Mileage?
I have 2011 f150 5.0 and looking to put a programmer on it to increase fuel mileage and fix speedometer for my bigger tires .
View 2 RepliesFord F-150 (2009-2014) :: Adding Turn Signal LED Light To Door Mirrors?
I have just bought on 09 XLT, and wouldn't you know it, I was behind a Lariet that made a left hand turn, and then I saw something my truck does not have... the turn signal LED at the bottom left hand side of it's mirror. And guess what? Now I want that too! I have seen some other threads about this on other web sites, but as far as I am concerned, this site is the last word on anything Ford truck! I have a couple of questions:
What is the Ford part # for the mirror turn signal lights? Also I would like to install the reflectors in front of the mirrors so I can add LEDs to them too. What is the part numbers for the front reflectors? And lastly, I would like to try not to tear up more than I need too, so would there already be the turn signal wires I could connect inside the mirror housing? Or since this does not have that option from the factory am I going to have to take the mirror off the truck and run those myself?
Passat (B6) :: Installing Springs - Can't Get The Front Strut Tower Out Of The Lower Clamp
We have spread it as much as we can and it's come up about 2 inches - then stops,
View 8 RepliesLexus IS 2014+ :: Rear License Plate Mount Rusting Already?
My Ultra white IS350 is 15 months old, and when I took out the screws to my license plate today, I noticed a little bit of rust on the mounts (where the screws would go into).
I believe this is a pretty common issue for all cars - essentially, the mount was sprayed with body paint, but the paint would be stripped when you put a screw in. It's just a matter of time before that happens.
I am just concerned it would rust through my trunk if I continue to leave it.
FYI: I already use stainless steel screws
Lexus LS 2007+ :: Broken Rear Strut On 2009 LS460
I have a broken rear strut on my 2009 LS 460 with 27000 miles. First noticed it about 25000 but dealer said it was only the cold weather and all was fine. I had a mechanic friend ride with me and he said I had a broken part in the rear suspension. Back to the dealer and this time they test drove it and diagnosed the broken rear strut. The tech told me that they had recently seen several LS 460's with the same problem. The broken strut causes handling problems and I am reluctant to drive at highway speeds.
The dealer (and all the other dealers I called) said that there are no parts available for the repair and one told me that the last strut had to be brought from Japan.
Lexus SC430 :: 2002 Hard Steel On Steel Knock Sounds In Front
I have had my struts replaced at local gas station. Unfortunately, there is now an occasional hard steel on steel knock in the front. Very weird indeed.
Is there something they may have missed when they installed them?
Corolla / Matrix 2009-13 :: Bolts Size For Rear License Plate?
what size bolts are needed for the rear license plate?
View 7 RepliesTiguan :: Clunk Noise Coming From Tight Strut - Pillow Mount Plate Replacement
I have a set of ST coilovers, installed on my tiguan s4motion they ride great but have noticed clunk noise coming from tight strut and I'm pretty sure it's the pillow mount plate, is there anywhere to get replacements or a better plate? ST website doesn't have them separately...
View 1 RepliesFord Super Duty (1999-2016) :: 2003 F250 - Rear Axle Steel Brake Line Size?
I made a bone head mistake and crunched the steel brake line between the rear axle and the passenger side sway bar mount. Truck is a 2003 F-250 with a 7.3. I would like to go to the auto parts store, get bulk steel brake line and bend it myself. But, I don't know what size the line is or what size the fittings are. Whatare the sizes???
View 3 Replies