Ford F-150 (2004-2008) :: Wrench Light And Random High Idle After Driving?
I've got a 2006 F150 FX4 with a 5.4L 3V
A couple of months ago, I got a random "amber wrench light" on the dash. After I shut the vehicle off, it would go away. Over the last month, it's been coming back on more frequently....pretty near every time I drive the truck. I'm also noticing a bit of a dead spot in the pedal at times....though it's never failed me completely.
After a quick Google search, I was led to believe it could be a throttle body issue. Before replacing the throttle body, it was suggested to remove and clean the throttle body itself....which I did.
I'm still getting the amber wrench light, but now I'm also getting a random high idle after driving. If I throw it in park, it will idle up to 2,000RPM. I initially assumed I may have created a vacuum leak of some sort, but when I shut the engine off and restart it (or even blip the key off and on again quick before the engine dies, it comes back to life and idles fine? This tells me that it isn't a vacuum issue.
The strangest part, is that it's not tripping any codes what so ever?
Ford - Explorer :: 2004 V6 Rough Idle - Codes P2104 And P2112
I have a 2004 Explorer with the 4.0L SOHC V6.
I was having some rough idle and a P0401 code for Insufficient EGR Flow. In the process of investigating the EGR valve, I had to remove the throttle position sensor to remove the EGR. After re-installing everything, I had a worse rough idle and I again removed the EGR valve; however this time instead of removing the throttle position sensor, I removed the entire throttle body assembly.
After re-installing everything again, I now have very rough idle and no pedal response. I have the following two codes:
P2104- Throttle Actuator Control System Forced Closed
P2112- Throttle Actuator Control System Stuck Closed
I did not unplug any harness, and all connections are secure. I did not remove the battery cables while working on it, but I did remove the negative cable for about 45 minutes after getting the P2104/P2112 codes hoping a reset my fix things.
Ford F-150 (2004-2008) :: 2005 - Electronic Throttle Control / Wrench Light
2005 Ford F-150 FX4 5.4 V8
So my battery died the other day when I was working on the radio and I ended up having to jump start the vehicle. After the jump start the Wrench light came on the truck or the ETC light. (After doing research I have discovered you are not supposed to jump start a vehicle with ETC)
I have taken the car to the auto parts store and it does not seem the code readers they have can read codes for the ETC light.
I have also disconnected the battery cable to try and reset the light, but it still always comes on about 10 seconds after starting the car.
I have had no issues with the vehicle despite the light. No rough idle, no starting issues, or acceleration issues at any speed. What I can do to resolve this light or what part I fried when I jump started the car?
Ford F-150 (2009-2014) :: 2011 - Wrench Light On With P0720 Code?
I'm having issues when shifting into reverse and I it goes into limp mode when the wrench light shows up. This will not happen when shifting into Drive. When in limp mode I get engine code P0720. This calls for a bad Output Speed Sensor and my research says the sensor is on the back of the transmission but I cannot find any sensors on the transmission. there are several connectors clipped to it but I don't see any bolted in sensors. Also I cannot find a replacement sensor anywhere so I'm wondering if this is a generic code.
View 3 RepliesFord F-150 (2009-2014) :: Wrench Light On Upon Starting And Trying To Put It Into Gear - Code P0720
The last few days I've started getting the Wrench Light on my dash panel upon starting the truck and trying to put it into gear. I first noticed this on a cold morning and got the wrench but the truck went into Reverse and once I got going I was only in 3rd gear. I started and stopped the engine a few times and finally got it going. Since then it seems to do it all the time whether hot or cold. Tonight I noticed that if i start the engine and just go directly into Drive. I don't have the issue but if I ever go into Reverse it goes into limp mode and i get the big yellow wrench again. I only have engine Code P0720 which seems to refer to a speed sensor. I can't seem to find the sensor listed on the typical auto part websites.
View 4 RepliesFord F-150 (2004-2008) :: Code P0300 - Rough / Low Idle After Timing Set
Just did the timing chain, phasers, oil pump and lash adjusters on my 05 5.4 s-crew. Always had a bit of a rough idle but now it's worse. If the truck idles for an extended period it sets a p0300. Just off idle the misfire is gone. It does seem a touch down on power but otherwise runs great. I did have the plugs out during the work. I cleaned them, applied anti seize and re installed. The previous owner had the plugs and COPs changed 10k miles ago. Plugs are motorcraft and coils are aftermarket.
I monitored with oreillys crappy scan tool and the miss only happens at idle. It is not a dead miss; unplugging COP on each cylinder still makes it worse.
Truck idles warm at like 570 rpm and if I hold my foot on the pedal to raise rpm a bit miss goes away.
Each cylinder is logging misfire counts with no rhyme or reason. The only thing odd during the timing job was 4 spark plugs were partially loose.
I'm sure the timing is correct; I used the OTC crank tool and for timing kit. Truck has 150k, front 02s are fairly new...
Ford F-150 (2004-2008) :: 2005 - Rough Idle - Code P0012
I have a 2005 f150 5.4 3 valve with the p0012 code the truck runs good has a rough idle not sure if it is worth changing the vct or not the truck has 190000 miles....
View 1 RepliesFord F-150 (2004-2008) :: Truck Is A Bit Rough At Idle - B1360 Code - No CEL
So I bought a 2006 F150 stx reg cab with the 4.6l motor with 90k miles on it a few weeks ago. It was in really good condition and I couldn't pass the deal up. All in all, I love this truck. However at idle the truck is a bit rough. No check engine light, but a bit rough non the less. So I hooked up my obd2 torque app and I see I have anywhere between 6 and 60 total counted misfires, but none detected by individual cylinder. So I ran a scan and have a B1360 code without the CEL on. So I changed the plugs and coil packs and cleaned the k&n filer (non cold air filter, just a replacement k&n) and I still have all the symptoms and the b136p code. So I Google the b1360 code and there's very little on it. Basically says open circuit ignition.
View 1 RepliesPrius (2004-09) :: Hybrid Light Comes On And It Won't Shut Down - P3016 Code
Bought a used 06, 5,000 miles ago. I bought it at a Toyota dealer and before I bought it I noticed the check engine light on, so I made them run the codes. The tech said that it showed the hybrid battery needs replaced. They had advertised it as batteries replaced. So, they replaced the battery that they said was under warranty and all was cool. I love it, but the other day the lights come on and the hybrid light comes on and it won't shut down.
I get it home and run the code reader and get a P3016. Then I erased everything, as soon as I erased it, the battery fan shuts down, I fire it up and everything is perfect, all systems go. take it out the next day and put 200 miles on it before it repeats. I erased the codes this morning and all is fine again.
What I read on the P3016 code is that it is either a bad cell, or a shorted cell in the hybrid battery, but it seems to me that if the cell was bad it should throw the code as soon as you fire it back up? Is it possible that it is a computer malfunction and not the battery at all. I'm leaving my code reader in the car for now so I can reset it the next time it happens.
Ford F-150 (2004-2008) :: Rough Idle / Engine Stall Out While In Park - Lean Code
My 04 F150 has started having a rough idle. While in park the engine will stall out with the A/C off. Also when in drive the truck will idle close to 1000rpm's. I had to the fuel filter cleaned and also the MAF sensor cleaned. Also did a vacuum check on it. Pulled the code and it's throwing a Lean Code. What else should I be looking for?
View 12 RepliesFord F-150 (2004-2008) :: Rough Idle And Hard Miss Under Load - CEL Code P0306
2005 f150 5.4.
I have a slightly rough idle and can feel a miss at 1600 to 2000 RPM. Sometimes running about 65 MPH up a slight grade I can slowly press the gas pedal and the engine will begin to miss much worse, causing the truck to shake pretty bad. When it gets this bad it will slowly flash the CEL and I get a P0306 code (Cyl 6 missfire).
The truck has 148000 Miles on it and the plugs were replaced at approx 120000 by the dealer.
In the last week I have replaced the plug in cylinder 6 (looked ok) and have replaced all the COP's along with the fuel filter and the injector on #6.
I haven't been able to get it flash the CEL light or throw a code since replacing the COPs though and I am at a loss at to what to try next.
Ford F-150 (2004-2008) :: Engine Starts To Run Rough And CEL On Within Seconds After Idle - Code P0351
2004 F150 5.4 3v. I bought the truck with 102k on it, it now has 124k. In the morning, when the outside temp is between 30-50, the engine starts and runs fine. When I get to the first red light ( about 1 mile away) within seconds of the engine at idle, engine starts to run rough and CEL. Every time the code is p0351. If I let it sit in the driveway to full warm up... no problem. If I start the truck, shut it off and restart...no problem. It only happens at the cooler temps. I have changed plugs, used motorcraft, nickel antiseize, torqued, etc. Ford changed the coil, I have changed the coil, cleaned MAF. As soon as I cross the intersection, light stays on, rough running clears up, and runs like a champ for the rest of the day.
View 2 RepliesFord F-150 (2004-2008) :: 2006 - No Power / Rough Idle / Random Misfire Code
Have an 06 F150 5.4 3v with no power. spark knock. rough idle. wants to die while driving, and random misfire code. Have replaced fuel pump, filter, coils and plugs. What to check next? Already thought of EGR - it doesn't have one.
View 4 RepliesPrius (2004-09) :: Car Shut Off And Check Engine Light Came On - Code P0121 TPS
I got an 2009 toyota prius I was driving home one day and car shut off and check engine light came on after 10 mins of the car being off I try to turn it on, it started with the check engine light still on main battery light came off, I ran to AutoZone and got my car scan for codes and P0121 was my code tps my car has 120k miles what should I do clean the throttle body? Replace the sensor? How would I test the sensor if it's bad?
View 4 RepliesFord F-150 (2004-2008) :: 2005 - Rough Idle At Low Speeds Primarily In Reverse / Code P0022
2005 f150 Lariat 4x4 5.4
Had phasers, tensioners, chains, guides, and sensors replaced. After driving the truck, it started to get a rough idle at low speeds, primarily in reverse. Changed both vct solenoids with no results. Started to get p0022 code. Changed the oil with motorcraft filter and 5w-20 twice after the work had been done, thinking it might need it. Vct's were a little varnished, but not too bad.
After a couple days of light driving, got a misfire on #3. Replaced the coil and it hasn't been back since. I am stumped at this point.
The computer show the timing to be at +13 when sitting stopped and in drive. It fluctuates a little, but not much. When the truck goes into a rough idle. The rpm's fluctuate wildly. It seems to be happening more frequently, the more I drive it.
Ford F-150 (2004-2008) :: Airbag Light - Code 25 Flashing
So I swapped in a new cluster fx4 to stx to get my airbag light to work. It now works but flashes code 25. Is code 25 the passenger airbag deactivation switch?
View 2 RepliesFord F-150 (2004-2008) :: Emissions Light Came On - P0054 Code
A couple of days ago my emissions light came on in my truck and the P0054 is the code I get when I scan it. Did a little research online and it looks like it could possibly be a 02 sensor issue. Truck seems to be running fine.. I have a 06 F150 with a 5.4L.....
View 1 RepliesFord F-150 (2004-2008) :: ABS Light Won't Go Away After New Sensor B1230 Code
Problem: Initially thought replacing the rear wheel speed sensor on top of the differential would make the light go away on a 2007 F-150 XLT. What I've done already.
-Replaced the sensor
-Used the IDS ford computer to clear the code
-Test drove it for 30 minutes and the light is still on
-Reset any codes by disconnecting the battery
-I have gone as far as swapping a different ABS module thinking it was the problem, after it was re-programmed the module checked out and it wasn't at fault.
It must be a wire, all the fuses for the ABS system are fine.
Issue or traced all the wires and found a common problem such as a pinched wire or melted wire between the module and the sensor? From what I have been researching this code B1230 .
-bad sensor
-sensor grounding out somewhere
Attempted a multi-meter test today and didn't get very far.
Ford F-150 (2004-2008) :: Check Engine Light On - Code Is PO446
I have engine light on and the code is PO446. just changed fuel filter on my 2006 5.4L f150. What the code means ?
View 1 Replies