Ford F-150 (2004-2008) :: Replacement Motor For 5.4 Vin V
I'm looking for a replacement motor for a 5.4 08 vin v. Do the 9-10 motor with the same vin code v. I know intake is different but the heads are the same.
View 6 RepliesFord F-150 (2004-2008) :: Timing Chain Replacement?
I have a new style 2004 F150 XLT supercrew with a 4.6. Well, I just hit 300,00 miles earlier this week. The truck has performed pretty much flawlessly over the years (and still does). I've replaced front hubs, IWE's, brakes, fluids, etc, but have NEVER opened up the engine. Is it time to replace the timing chain?
First thought is ,yes, like 50,000 miles ago, but... It has some dents and dings and the rust is getting to it. There is 300,000 on the transmission also... Virtually no residual value- If it strands me on the road, it's time for a new truck.
On the other hand, it only burns a little over a quart at 3000 mile change intervals, the transmission seems strong. I just shampooed the cloth interior and detailed it. The thing looks great from the vantage point of the steering wheel.
No engine issues at all- no rattling, etc.
Ford F-150 (2004-2008) :: Intake Manifold Replacement?
Looking for any pictures or directions on replacing the intake manifold on the 2004 F150, 5.4. Got all the parts with the pulgs, and ignition coils.
View 6 RepliesFord F-150 (2004-2008) :: Won't Start - Battery Replacement?
Yesterday I had to jump start my truck twice, after driving 200 miles then this morning, it still wouldn't start. Likely time for new battery being on original battery since new. Before I go over to local Sears, checking out the Diehards. Any particular brands?
View 5 RepliesFord F-150 (2004-2008) :: Front Strut Replacement
I've just begun to replace my front struts (Monroe quick strut pre-assembled). The thing is, the top bearing plate bolts and the lower mounting point are out of alignment by 90 degrees. The included directions say they can be rotated but gives no procedure and they do not just "turn" easily obviously. How to rotate them to fit??
View 3 RepliesFord F-150 (2004-2008) :: 2007 - Front Struts Replacement?
Looking for a link for a novice to see how to replace the front struts on my 07? I'm thinking I'm capable of getting them out, but will take them to a shop to compress the spring and do the switch.
View 3 RepliesFord F-150 (2004-2008) :: 3rd Brake Light Assembly Replacement?
How to access the plugin for the 3rd brake light, cant seem to find it from the top, do I need to remove the headliner?
View 2 RepliesFord F-150 (2004-2008) :: Electronic Throttle Body Replacement
While driving home my yellow wrench light came on and I had no power at the pedal, even though the engine was idling smoothly. This happened with no warning and went away when I turned the truck off and restarted it. About 4 miles later it did it again. I immediately went to a nearby dealership only to find out my electronic throttle body needs replaced. Needless to say at this time of year 500+ dollars is not readily available, although I need my vehicle for work.
I do not know a thing about ETB's but did a little research online and found many aftermarket ones at a much better price than Ford's(surprise). My question I guess is what are my alternatives to factory replacement? Can I remove and clean this component or replace it with something of better quality? I'm not into high performance with my truck but if I could get a little better throttle response or gas mileage I'm all ears. My truck is a 2004 Supercrew 4x4 XLT w/ 5.4 Triton. Around 74,000 miles and well taken care of. Miles are nearly all highway.
Ford F-150 (2004-2008) :: 2005 - Upper Control Arm Replacement
I have to replace the upper control arm on my 05 f150 4x4. I've been looking around the site and didn't see anything. Is there directions posted anywhere on the procedure? or if the strut assembly has to be removed? If so do I have to compress the spring first?
View 7 RepliesFord F-150 (2004-2008) :: Stock Muffler Replacement With Magnaflow?
Replacing their stock muffler with a Magnaflow and kept the rest of the exhast system stock? How does it sound? Any performance gains?
View 14 RepliesFord F-150 (2004-2008) :: Puddle Light Bulb Replacement
So I finally figured out how to get the puddle lights out of my factory tow mirrors. I want to replace the bulbs with LEDs.
But how do I take this apart? Looks like the clear plastic lens is superglued.
Ford F-150 (2004-2008) :: 2007 - Spark Plugs Replacement Every 60k?
My '07 had the check engine come in the other day, engine misfire. I took it to the dealer hoping it was a coil, due to the 100,000 mi warranty from Ford I was hoping would be covered. Sadly, and of course, all coils tested fine, turns out 2 plugs were bad. They replaced all 8 plugs, plus a plug boot. Not one plug broke (truck had 80k on it) so no extra cost there. So much more, but peace of mind that all the plugs are new one piece plugs is great. He recommended that they should be replaced every 60k to avoid any issues.
View 7 RepliesFord F-150 (2004-2008) :: Spark Plug Removal / Replacement
I just picked up a 05 F150 lariat 5.4 2wd with a 177k on it. What the chances of these plugs coming out with out breaking? Any tips tricks to getting them out? Should I put motorcraft plugs back in it ?
View 6 RepliesFord F-150 (2004-2008) :: Low Idle After Alternator And Battery Replacement
I just replaced my battery and alternator this evening on my 2004 F-150 5.4L. After driving it around a bit, the idle is dropping to about 100 RPM almost to a point of stalling when coming to stop. It slowly creeps back up to a normal idle shortly after.
View 4 RepliesFord F-150 (2004-2008) :: Front Rotor Replacement - Torque?
2008 F-150 2WD
How tight should the wheel bearing retaining nut (sealed bearing hubs) be torqued when replacing the front rotors?
Is there a spec, or just real good and tight since the bearings are sealed units.....
Ford F-150 (2004-2008) :: PCV Replacement Without Taking Off The Valve Cover?
5.4L 3v engine: The PCV is located in the drivers side valve cover. Tried to pull it out with no success and came to the conclusion that maybe it's threaded and a nut locks it in from the underside of the valve cover. Can this thing be replaced without taking off the valve cover?
View 4 RepliesFord F-150 (2004-2008) :: Fuel Pump Module Falling Apart / Replacement?
So the fuel pump module on my truck is falling apart, and I figured I might as well replace it....
View 10 RepliesFord F-150 (2004-2008) :: 2007 V6 - Auto Tail Shaft Replacement
I'm working on a 2007 F150 V6 with a 4 speed automatic.. which seems to be a 4R70W. It has 36,xxx miles on it and the transmission tailshaft is cracked by the mount and leaking fluid.
The tailshaft can be replaced by itself without disassembling and removing the whole transmission right? The part number/Ford Engineering number on it is "RF-F3LP-7A040-AA" and it says 42A below that. Can I look for any tailshaft or just this number? F3 is a 1993 number isn't it? I don't know the length of it but it doesn't have a hole for a speedo cable.
Ford F-150 (2004-2008) :: 2006 - Lower Ball Joint Replacement?
I have an 06 F150 2wd that needs both lower ball joints. I've done searches and everyone keeps talking about a big freaking hammer. Can't you just use a ball joint press kit to remove and reinstall these? If no I'm gonna find someone to put them in for me because Im scared of breaking the aluminum control arm. There was also some talk of using some sorta glue on the joints as well.
View 8 Replies