Passat (B6) :: Rear Bumper Removal For Hitch Installation
I will be installing a Euro-type of hitch to my car and for that the rear bumper needs to be removed.
View 8 RepliesFord Excursion :: 2003 7.3L - Oil Pan Rusting
While getting my oill changed, the pit guy reported my oil pan was rusting. I happened to be at the non local friendly FORD Dealer and mentioned it to the Service Manger who told me it was "the lousy steel FORD uses and your Differential covers are probably rusting out, too". And they are - from the inside out.
Seems strange to me oil bathed steel could rust, but the Dealer said the engine had to come out to replace the oil pan with an OEM. He would install a SS aftermarket, but he wouldn't warrent the pan.
So, where can I get a Stainless Oil Pan and Diff covers for a 2003 7.3L X?
Ford Excursion :: Rear Hitch Ripped Due To Rust?
A buddy of mine ripped the hitch off his excursion due to rust. Anything can be fixed. I will try to get a picture of it.
View 10 RepliesFord Excursion :: Without Dropping Tank Remove Hitch?
My hitch receiver is looking pretty strange lately and I want to take it down, grind it and repaint it. While crawling underneath the truck today, I noticed that it appears the bolts holding the hitch are kind of covered by the Tank Skid Plate.
I did some searching, and from what I've gathered, it appears that To drop the skid plate means to also drop the tank as they are one unit.
Is this true? Is there any way for me to get the hitch receiver out without messing around with the gas tank?
Ford Excursion :: Rusting Roof - Solution?
Looking for any creative solution for roof rusting that does not involve a major body shop repair and paint job. I was wondering if it could be chemically neutralized and then covered (sealed) with something like Line X?
View 9 RepliesFord Excursion :: Light Rust On Frame Rails And Hitch Receiver
I've never used a rust converter, so I have no experience and wanted to hear from those who have. I've got some light rust on the frame rails and the hitch receiver. What product would you recommend, or do these products work well enough to consider? According to all of the websites, they all work miracles...
View 3 RepliesFord Excursion :: 2005 - Rusting At Bottom Of All Door Panels?
I just noticed my excursion is rusting at the bottom of all 4 door panels With the rubber seals you wouldn't notice it unless you look for it. I was thinking of using pro-15 metal prep before the por-15, how did it work?
View 14 RepliesFord Excursion :: Rear AC Panel Removal
I need to get to the filter in the rear ac panel. What is the best way to go about removing the Panel? How much do I have to remove?
View 6 RepliesFord Excursion :: Overhead Console Removal?
How to remove the overhead console in my Excursion? I just want to make sure I dont break it.
View 6 RepliesFord Excursion :: Front Passenger Shock Top Nut Removal
Any trick that they have used before for removing the Front Passenger Shock Top Nut without removing the A/C Accumulator? The Nut I need to remove is right underneath the A/C Accumulator and I can't get a 15mm Deep Socket on the nut so that I can use an air tool to take off the nut like I did on the Driver side. Is my only option to use a 15mm ratcheting box end wrench or remove the accumulator? On AllData, they show the pics of the Driver Side which is easy to access with just a swivel and a couple of extensions.
View 1 RepliesFord Excursion :: Front Axle Gears Removal
Well the old ball ball joints are out, new ones are in and now I'm working on removing gear assembly so I can change the inner axle seals. I've been trying to get it out. It haven't had much luck. I've loosened the cap bolts, prayed, pulled, hit, and still no luck. The only thing I've been successful at is screwing up the first few threads of the bolt holes for the passenger side cap. Tomorrow I'll be getting a tap and chasing the threads to clean them up. Hope I haven't screwed it up too bad. How to get the gear assembly out?
View 8 RepliesFord Excursion :: Removal Of Chassis Rust With Blackstar?
My X spent 4 years up north and has a lot of rust underneath the chassis, can use blackstar rust remover polymer? I cannot stand looking at it and was wondering about having success using this product? It looks like it removes rust and seals it with a polymer.
[URL]....
Ford Excursion :: Filter Cup Removal On External Transmission?
Removing the filter cup on the external transmission filter?
I tried tonight to get it off and it wouldn't budge!
Ford Excursion :: Removal Of Rear Plastic Piece From The Glass?
Mine is peeling like I know they all do and I want to sand it and re-paint it. How exactly does it come off?
View 8 RepliesFord Excursion :: Removal Of Backup Sensors In Rear Bumper?
My Excursion had a mangled rear bumper when I bought it recently. I just bought a salvage one to replace it. I had it installed today. I want to salvage the backup sensors in the old bumper along with the license plate lights. How do these come out? They seem locked in there to me.
View 3 RepliesFord Excursion :: 2000 2WD - Front Rotor Removal And Type
How should the front rotors look for a 2000 2WD Excursion:
Photo #1 - With Studs:
OR
Photo #2 - Without Studs:
When I do searches online for parts, I get both kind.
Also, if with studs, do you have to remove the hub and cotter pin to remove the rotor?
Ford Excursion :: Driver Side Door Lock Actuator Removal?
I searched but can't find anything I know how to fix it once it's out, but until I get it out I got nothing.
View 4 RepliesFord Excursion :: Inside Trim Removal From Back Glass Hatch Window
I may not be searching correctly...? How the back inside trim is removed from the hatch window. I know the handle has the two Torx screws does the trim pull out or are there clips? Don't want to break any plastic parts. I found how to fix the back lock. I found the back barn door trim removal.
View 2 RepliesFord Ranger / B-Series :: Ball Hitch Won't Remove?
I know this sounds pathetic but i cannot get the ball hitch off of my truck. That thing is on there and i cant get it loose because the ball keeps turning when i try to break the nut loose. I have tried several ways to keep the ball still but they don't hold it enough for me to get the nut loose. I dont care about keeping the hitch i am trying to put a smaller one on and don't need it so if i have to break it to get it off i don't care.
View 4 Replies