Ford Aerostar :: 1989 - Losing Coolant But No Leak?
1989 3.0 shorty - 135K on her - and at 21 years old, the original radiator finally failed with a hair line crack, and so I bought a plastic on, from on of the part stores, put it in, and now it takes on like a gallon a month of antifreeze.
BUT I see no leak at all... the engine runs fine, and not head gasket or crack head (been there done that with the explorer I have). I don't smell it either really -heater core is dry... as is floor underneath. Need replacing the Radiator?
Ford Aerostar :: 1989 - Losing Coolant But No Leak Found?
89 3.0L - I seem to loose a little bit of coolant every time I drive maybe like 1/2 a pint?
I checked every connection - engine running, and even waited to make sure the t-stat was opening, and closed, etc (maybe it was the top hose, nope)
I did replace the radiator a couple of years ago, and had the problem ever since I did that, but at the same time, I also replaced the T-Stat with a 165 degree, since she was starting to run a bit on the hot side, even with the new water pump and radiator I did... on a cool day, it would run at the middle of the gauge with a 190 degree... and with AC on, hills and 95 degree days, it would be pushing upwards of 3/4 of the way on the gauge...
Could the 165 degree therm stat be somehow causing a 13 lb cap to not function properly? I replaced the original with a Stant... but Im thinking I should get a new Motorcraft OEM cap, since the other one lasted 20 years!
I kept the old radiator - love it - "wow real brass/copper in there!" it was still fine when I pulled it, but had a hairline crack right below the top hose area...
Anyways, pressure tests revel nothing, I see no bubbles or anything with the engine idling, cap off
Ford Aerostar :: 1994 - Coolant Leak Behind The Water Pump
1994 - 3.0 .... Back behind the water pump there is a stream of coolant what could that be. Water pump has been replaced earlier last year I thought that fixed it,there has always been a mystery leak..
View 6 RepliesFord Aerostar :: Minor Coolant Leak Coming From Heater Hoses
I'm feeling a bit embarrassed posting my delima, but I have a minor coolant leak which seams to be coming from where the heater hoses connect to the water pump and as well to the thermostat nuckle thingy. I have replaced all of the hose fittings with SS band clamps.
A couple of weeks ago I replaced the water pump, thermostat, alternator, rad hoses, belts, coolant sensor, PS tension pulley. The water pump is now tight and sealed. Since then the temperature gauge has been continually fluctuating from Normal to near Cold.
I was wondering if I should have placed some type of sealant compound where the heater hoses connect to the water pump and also to the thermostat nuckle thingy.
Initially, I thought it may be residual trapped air in the coolant system. But after a week, it became apparent that the heater hoses were leaking at the engine, and at the water pump, connections.
What puzzles and torments me is why is the temperature gauge fluctuating so widely up and down? This is totally weird.
Ford A/C :: 2001 - Coolant Leak At The Top Of Engine In Front On Passenger Side
I have a 2001 expedition 5.4 ltr that has developed a coolant leak. Leak appears to be on top of the engine, in front on passenger side. The area around the front fuel injector (on passenger side) is wet and water is running down and sitting on top of engine (under intake manifold). My first thought was that the heater hose extending vertically from the block hose fitting. I have found no evidence of a leak in the hose but it appears fitting on block may be the source. It has three bolts holding it onto the block. One from the top and two coming up from the bottom. Two of the three area accessible. How to get to the upside down bolt nestled between hose fitting, block and valve cover. It's been a slow leak so far but I know that's not going to last. Runs fine but steams from water on block at stops and when parked.
View 2 RepliesFord 7.3L Power Stroke (1999-2003) :: Coolant Leak From Behind Timing Cover?
I have a coolant leak from behind my timing cover found while doing a coolant system pressure test. I do not want to remove the engine. Looking for info on successful cover install with the engine still in the truck?
View 8 RepliesFord Ranger / B-Series :: Coolant Leak From Timing Chain Cover Gasket?
I have 2000 V6 3.0 Ranger and it has sprung a small coolant leak from timing chain cover gasket. I think just few drips after driving a while since I don't see significant drop in coolant level (Took a month to notice level dropped in reservoir) and did not see an active leak while idling. No water in the oil.
The proper repair would be to replace the gasket, but for the age and condition of the truck, I don't think it is worth it. Searching for a cheaper solution, I found K-Seal and see lots of reviews with success. Will it damage the cooling system in anyway? I think it would be worth a try even if it doesn't fix the leak as long as it does not cause any harm.
Ford 6.0L Power Stroke Diesel :: 2006 - Coolant Leak In Front Of Engine?
I have a 06 f250 that has a coolant leak in the front of the engine. It's was leaking about a month ago replaced the water pump it stopped. Then about 2 weeks later it started back up again. It only happens when the engine is cold. But once it warms up it starts leaking again. I am confused as all get out on this.
View 1 RepliesFord - Explorer :: 1992 - Coolant Leak At Front Of Engine Above Water Pump
My 92 Explorer 4WD has a coolant leak somewhere at the front of the engine above the water pump. I assume it's the lower intake manifold gasket leaking. The engine has 170k miles. I'm also seeing a small amount of white smoke, possibly steam when the engine is running. It's somewhat heavy when I start it up but mostly goes away once warm, so I suppose it could be steam, but could be coolant from either a head gasket leak or lower intake leak.
I also get a lot of water from the exhaust dripping on to the floor and the smell of the exhaust could be that of coolant, it's hard to tell. There is no coolant in the oil. I was wondering if I should go ahead and change the head gaskets while I have the intake out. Is there anyway to be certain the head gaskets are fine? I'd hate to change the intake gasket to find out there's a small leak in one of the head gaskets.
One other thing: I failed emissions because my CO was too high, but my HC and NOx were very low. Could this be an indication of coolant entering the combustion chamber? Just wondering why my CO was so high yet everything else passed (Massachusetts emissions).
Ford Ranger / B-Series :: 1994 2.3L - Coolant Leak Coming From Under Black Plastic Cover
I noticed green coolant leaking from bottom of black, what I think is called, timing belt cover. There is 188, 000 miles, and when I changed the timing belt, I did not change the water pump, although I did change out the thermostat. I have done a lot of work on this truck in the past. I checked the oil and no signs of water or coolant mixed in. The water pump is not weeping from the top well. I rely on this truck and the way I look at it is I may just keep driving it until it goes kaput (its real beat up). Should I go to an auto parts store and see if I can buy some sealant. I would guess it is either the water pump or maybe the timing cover gasket? I have inspected all hoses, and I see nothing. The leak must be coming from somewhere under that black, plastic cover. I am capable and willing to do just about anything other than perhaps a full engine pull, although I have the wherewithal to do that too if absolutely necessary.
View 9 RepliesFord 7.3L Power Stroke (1999-2003) :: Coolant Leak Between Block And Timing Cover - Fix?
Is this common? No coolant in the oil-YET........
Any way to fix it without pulling the cover?
Ford Ranger / B-Series :: Severe Coolant Leak - Seal Lost Behind The Pump On Timing Cover
I have an '04 Ranger Edge 3.0 with a severe coolant leak. It appears to be coming from the area where the head/water pump housing meet. I have been told I've lost the seal behind the pump on the timing cover. Is there any way to know for sure? Will I be able to tell, once the pump is out that it isn't coming from the head side? Are there any "special" instructions for re-sealing after replacing pump?
View 6 RepliesFord Aerostar :: 1993 - Front Oil Pan Leak?
Well I've got an nice steady leak coming from the front of the pan.... running aft of course (downhill, windflow). She's down right now for an AC overhaul and new PS pump/hoses, but I'm inspecting to see what is next to get this stinking oil leakage stopped.
Front HB removal and seal of course, done in situ (in position). But if it is actually the oil pan/seal, can that be done there also? Front of the pan looks tight to the crossmember, and how the internals look (tray baffles, pump pickup) I've no clue if it will come off. Once she is back up and running I'll ascertain where this leak originates.
Interweb searches show the 90-94 4.0L engine is notorious for pan gasket leaks. None of the writeups I've found thus far determine if that pan can be pulled where she sits.
Golf IV / Jetta IV :: Coolant Leak From Behind Thermostat Cover So Soon?
02 Jetta 2.0L that I changed the thermostat. o-ring, and cover on when I first got the car about a year and a half ago.
I see dry g12 coming out from behind the cover and my coolant bulb had dipped quite a bit in recent weeks requiring a refill. What is most likely the problem here in such a short period of time? I've only put like 10k miles on the car in that period. O-ring couldn't have seated wrong because wouldn't the problem have been apparent immediately back when I did the job? Maybe I need to re-torque the cover? Cracked cover?
Golf IV R32 :: Coolant Leak At Valve Cover Gasket
I've got a coolant leak here (I wiped away some of it before taking the picture):
Close up
This is the only place I can find coolant leaking and it's running down all the way to the water pump:
When I wiped away from just below the valve cover gasket it flaked right off and it doesn't appear there is any oil mixed in. I changed the oil today and it didn't appear to have any coolant mixed in either.
The coolant doesn't appear to have any oil in it's nice and pink as it should be. I started the car from a cold start and sat and watched the area waiting for it to leak but nothing ever came out, of course.
I know there shouldn't be coolant leaking from this area anyways but I don't know how else to explain the trail pictured. I definitely have a small leak somewhere as I've found coolant on the floor of the garage before.
Do I just replace the valve cover gasket and move on or is there something else I should be concerned with here?
Ford Aerostar :: Front Diff Getting Lot Of Oil From Vent Hose With No Leak?
Front diff does not leak but seems to get alot of oil coming out vent hose. enough to make a mess and require more top offs.
View 4 RepliesHonda - Odyssey :: 2004 - Coolant Leak From Gasket On Front Of Engine
The coolant is leaking from the gasket that is on the front of the engine. My repair guy suggested that I also do the timing belt at the same time. Do I have any other options? The Honda has 217,000 miles on it.
View 5 RepliesJeep - Cherokee :: 2001 - Losing Coolant / No Leak But Some Moisture Under The Valve Cover
I have had a Jeep Grand Cherokee for about 4 years. Over the last year or so, I have been having coolant loss. At first, it was very little over the course of a month. Now it is about a half a gallon over a few days. We can't find any leaks. The oil does not appear milky. There is a bit of moisture under the valve cover. What could be the problem?
View 3 RepliesDodge - Ram :: 1997 - Major Coolant Leak Coming Right From The Middle Of Front Of Engine
I've got a 1997 Dogde Ram 1500 Pickup. It's got a major coolant leak that seems to be coming right from the middle of the front of the engine. I can't see where it's coming from. I changed the thermostat and the water pump, but it seems to be even behind that. There is a rubber hose that comes off the water pump and disappears between the two banks. I can only see a tiny end of it, where it goes. It looks like getting to that would involve taking off the whole intake manifold. If that's the case, I might as well total the truck. I dunno...
View 12 Replies