Ford F-150 - 1997-2003 :: 1998 F250 - Replacing Heater Core?
I have a friend that wants me to replace his heater core on his 1998 f250 with a triton 5.4. I told him I would and I've done the one in my 1995 f150 5.8. is it the same process or where to find the step by step instructions.
View 1 RepliesFord Super Duty (1999-2016) :: 2001 F250 - Heater Core Replacement
I recently replaced my heater core on 2001 F250. Would be a simple job if it weren't for the quick connects on the hoses. Any tool to take these apart on the truck where space is limited?
View 1 RepliesFord Super Duty (1999-2016) :: 2008 F250 - Heater Core Replacement?
Started to attempt to replace the heater core in my 08 SD 6.4. Didn't know the entire plenum has to come out in order to replace it. How to remove the plenum? My buddy is a Ford tech but I just am not getting what he is telling me and there is next to nothing coming up when I try to search.
View 2 RepliesFord Taurus :: 2001 - Multiple Fuel Pump Failures
I have been through 7 fuel pumps in the last 9 months. I purchased the car 1 1/2 years ago with 95000mi from an elderly lady, pulled the car fax and it had no issues and had been back to the dealer every 3000 for every scheduled maintenance and minor routine maintenance. It is a 2001 SES DOHC 24valve.
9 months ago, the fuel pump died right next to the Ford dealer. It had been randomly quitting on me after I would shut it off for a month or so. Then I would hear it priming and knew it would start. Finally, it just wouldn't start after an hour of trying. Of course, the next morning it did.
Took it to Ford, and it wouldn't do it for them, but they thought it sounded like a fuel pump problem. The next 3 pumps they put in wouldn't register a full tank and would indicate that I was low on gas about 50-60 miles before it should, and when filling it, would only take 12 gallons of gas in the 18 gal tank.
The dealer checked the amount left in the tank and verified that it was an 18 gal tank ( which I already knew) when changing to #4 and finally agreed with me that something was amiss. They thought that maybe # 4 would be better because it came from a different place in a different box. These were all supposed to be genuine motorcraft parts.
The next 4 pumps registered a full tank and I was getting about 300 miles before the check fuel light would come on and would take 15.5-16 gal of gas to fill, which was normal. The problem was that they all died after about 600-700 miles. The dealer said they talked to Ford and they kept telling them the same things to check which they did and were all okay. Things like resistance connections. The last pump #7 failed early in the day and still wouldn't start the next day, but did start after getting it towed to Ford. The dealer attempted to order #8, but Ford had put a hold on all the pumps they had in stock. So either they weren't shipping anymore for me or there was a much widespread problem. They installed a Carquest pump this time. This one doesn't register the right fuel in it either. Not as bad as 1-3, but I am getting about 35-40 miles less than I should before the check fuel light comes on and it is taking about 14 gal to fill.
What Ford may be missing when they change these out that I might pass on? They probably wouldn't listen anyway as it took the first 3 before they actually measured the fuel still in the tank even though I had been telling them it wasn't right.
If # 8 works, should I just live with it not showing a full tank, at least it is working. Either way I am afraid to drive the car to anywhere but work and even that is kind of nerve wracking.
At least the pump has been under warranty every time to I get a loaner and they fix for free, but I want it fixed right!
Ford F-150 - 1997-2003 :: Freezing Temps - Multiple Starter Failures
2004 F-150 heritage : 12 degrees F yesterday. clicked (firewall solenoid) but starter was not pulling amps. After putting a jumper pack on it, after about 30-40 clicks it took off, never to work again.....towed it home with a rope.
2000 F-250 Super Duty : 7 degrees F today, did the same except you could tell the starter was pulling amps. Took a lot of clicks and engaged but I let off too quick, another bunch of clicks and it started. Once I moved it, I tried it a bunch more and it seemed to work, however I do not trust it.
2001 Crown Victoria : 7 degrees F today, the first turn of the key was nothing but a click, and the 2nd turn it worked fine. After moving it worked a bunch more times.
Whats up with the cold temps and the starters?
Silverado :: Plastic Coupling Between Core And Hose Remove From Heater Core?
Plastic coupling between core and hose, is there a specialty to needed to remove from heater core?
View 1 RepliesGolf IV R32 :: Multiple Windshield Washer Fluid Sensor Failures?
So my windshield washer fluid sensor popped on a couple of months ago, checked fluid (was full), I concluded that it was a failed sensor. I ordered a new one from ECS, put in last wknd, and finally: the low-level warning light disappeared. A few days later, I was adding some fluid into the reservoir (it was a new bottle and had no funnel) and I spilled a few drops. The spilled amount seemed to drop near the sensor plug, but didn't think it was a big deal. Went into work, came out later to head home, and you guessed it: the low-level light came back on (with a FULL reservoir).
I removed the plug yesterday, blew it out, but it didn't change a thing. Anyway, is it possible the sensor shorted because somehow some of the fluid go into the connection? If I hookup the vagcom, will I be able to tell if there is an issue (I know it didn't before when the first sensor failed). Is there even a fuse for the fluid sensor?
Camry 2012+ :: Multiple Power Door Lock Actuator Failures
I have a 2014 Camry SE with 35k miles. About six weeks ago the drivers side front power door lock actuator failed and was replaced by the dealer under warranty. Last week the front passenger side actuator failed and was replaced. Today, both rear door lock actuators stopped working.
I searched the forums and didn't find anything like this happening to other owners. It sounds like I have something burning up the actuators. I am very concerned because the new car warranty is up in less than 1000 miles and I could have an electrical problem on my hands. The actuators that have been replaced seem to be working fine. How I can handle this?
Tacoma :: 1997 3.4L Toyota - Multiple Camshaft Position Sensor Failures / Code P3040
I have a 1997 Toyota Tacoma 3.4L ... After having some problems a week ago with the truck dieing at every stop sign or any time my foot wasn't on the gas. Eventually the truck would not start at all. I finally got a CEL that gave me P3040 (Camshaft Position Sensor Circuit Malfunction) So I changed out the sensor and the truck fired right up and ran for 3 days.. Now the truck does not start again and I am getting the same CEL code.
View 1 RepliesFord A/C :: 2000 F150 - Heater Core Went Out
I have a 2000 F-150 5.4L 4x4. I am currently deployed and my wife has the truck. Just yesterday she told me my heater core went out again the only way she knows this is its the 4th time in just over a year. What would cause a heater core to go out so many times in a short period? What should I have my wife do? I do not want to get rid of my truck and I wont be back for another few months.
View 2 RepliesFord A/C :: 2005 - Front Heater Core Always On
2005 Ford E Series heater core is "always on"?
That is, coolant always circulate through the core, there is no "valve" that turns it on or off.
The HOT / COLD dial opens and closes a door (vacuum operated) that allow air to enter the heater core area?
Ford F-150 - 1997-2003 :: Bypass Heater Core On The Fly
My commute into the office was more difficult than usual because of the fumes pouring out of the vents. I have a 1997 F-150 5.4 V8. should I remove both in and out hoses from the firewall and connect them with a plastic fitting not to risk breaking the aluminum fittings on the motor?(There is an advanced a mile away) OR is it possible for me to remove the in hose from the firewall and remove the out hose from the motor, and run the in hose directly into the motor. Are the fittings the same and can I do that with limited time and tools?
View 8 RepliesFord - Focus :: 2000 - Heater Core Started Leaking
Coworker's 2000 Focus's heater core started leaking on his 50m commute this morning. He is ready to donate the car at this point. Any stop leak product (i.e. Bars) that would stop the leak without clogging the cooling system.
View 5 RepliesFord - F150 :: 2001 - Reversing Flow To Heater Core
The heater on my 2001 ford F150 is not heating. The blower is working, the inlet hose is hot, the outlet hose is cold. Removal of hoses confirms that there is very limited flow through the heater core. I flushed it but got only minimal improvement. However when I back flush (reversing the flow through the core) the flow is great. Here's the question: Can I reverse the flow through the heater core on a permanent basis? It seems this would give the needed flow of hot fluid through the core to allow heating. Is there a problem with doing this?
View 14 RepliesFord - Mustang :: 1989 - Heater Core Leaking Antifreeze
I have a 89 ford mustang with 4 cylinder. After being stored for the winter I noticed anti-freeze leaking from drain tube below heater core (small amount). I am not looking forward to replacing the heater core in this car! Any reason this happened after the car sitting in storage all winter??? or just a coincidence??
View 7 RepliesFord - F150 :: 2002 - Replaced 4 Heater Core In A Year?
Ford dealership is having problems with heater core repair. 2002 Ford F150 Supercrew. Problem is antifreeze (or early on just smell) in the cabin. 4 heater core replacements in 2 years. A hose (?) replaced. Electrolysis kit replaced. 4th heater core replacment finished yesterday. I know that I need to let the dripped antifreeze work out of the system, but I am smelling mild antifreeze this AM. Usually gets worse over 2-3 days then I have to take it in. What might be being missed here?
View 5 RepliesFord Excursion :: 2000 - Way To Back Flush Heater Core?
I need to back flush the heater core in my 2000 EX with a 6.8. Looking at the outlet hose I don't see anywhere to separate it, do I need to cut the rubber section and put a flushing "T" in it ?
View 1 RepliesFord F-150 - 1997-2003 :: 1998 - Heater Core Replacement?
How to replace the heater core?
View 13 RepliesFord F-150 - 1997-2003 :: 1999 - Replacing The Heater Core
Friend of mine has a 99 Ford F150 with the 5.4L. He thinks the heater core has gone on it as it blows a mist through the top vents when he turns the heater on. He can also smell antifreeze. Up here in Canada, its, well quite cold, nuff said about that. He has had estimates of anywhre from $800-$1000 to change it whereas the cost of the core is below $100. Is there anywhere that he can get a diagram.... of how to change it, all he knows was that he was told to remove the entire dash to gat at it.. Is that true ?
View 14 Replies