Ford 7.3L Power Stroke (1999-2003) :: Battery Terminal Sparked
I was changing out the hydroboost and left the passenger battery connected, the positive terminal on the driver side sparked and now the trucks having a hard time starting? What should I check? Fuse or somthing else
View 12 RepliesFord F-150 (2009-2014) :: 2013 - Positive Battery Terminal Corrosion
My new to my 2013 f150 needs the terminal replaced due to corrosion. Need the p/n for just the terminal not the whole cable.
View 2 RepliesCamry :: 2005 V6 - Harnesses On Battery Positive Terminal
Car details : 2005 Camry V6
I was replacing the dead battery in my car. While disconnecting positive terminal cables, top cable going to relay/ fuse box side was broken around the lug.Looks like power cable for fusebox or something. I have 2 cables connecting to the positive terminal and only one is broken.
1.If this particular cable can be bought independently , if yes what is the part number . Can I buy this at any local store ? .
Confusion is, all I see is one cable listed on part schematic which seems to be the second cable.
2. Couldn't find any DIYs with pictures to replace this cable, as currently I can only see half of the cable . Don't know where other end goes.
Now my car is sitting duck with me taking a cab to go to work.
Ford 6.0L Power Stroke Diesel :: Positive Cables Of Battery Sparking?
I'm pretty new to working on cars let alone a diesel truck, so this could well be something simple and / or dumb. Hopefully it is.
Batteries recently replaced. Started cleaning terminals on driver side and realized I needed a couple of fasteners. Between getting them, the weather going bad and getting sick that battery was unconnected for several days, truck not driven.
Finished cleaning the terminals this afternoon, went to connect the positive cables and they're sparking. Driver side negative cable is unattached. Neither of the two positive cables sparks when touching positive battery post alone. They only spark when they are brought together.
Ford 6.0L Power Stroke Diesel :: Size Of Wrench For Battery Terminal?
I'm not near my stuff--is the battery cable terminal bolt 8mm?
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: Battery Light Staying On After Alternator Replacement
Had a bad alternator, changed it, and now the battery lite stays on all the time..Changed the alternator again with a known good one, and the light is still on all the time..
View 14 RepliesFord Super Duty (1999-2016) :: 2002 F350 Won't Start After Installation Of Positive Cable Set For Dual Battery?
I just installed a new positive cable set for the dual battery's and the starter checks out good.
View 5 RepliesFord 7.3L Power Stroke (1999-2003) :: Steering Box Replacement?
Looks like a pia but nothing too crazy.I don't have a pitman arm puller, but can borrow one.
View 14 RepliesPrius (2004-09) :: After HV Battery Repair - No Power On Car Side Terminal
After replacing one of the HV batteries defective out of the 28 in my Gen 2, I reinstalled a working battery and the car won't start. With the car turned on, I went ahead and measured current on the HV battery side and get 220, and on the car side terminals there is no power. The service switch is working correctly and engaged. For some reason the voltage is not being relayed to the car side.
View 9 RepliesFord 7.3L Power Stroke (1999-2003) :: Hub And Wheel Bearing Replacement
I'm in the middle of replacing the hub and bearing assembly, once i got the hub assembly off, I noticed when I grab the axle there is a lot of play if I pull the axle up and down or left to right. Is this normal as the hub assembly holds it in position? I don't have any fluid leaking so the seal must be good, or am I missing something. I am trying to do this in 30 degree weather and it sucks.
View 10 RepliesFord 7.3L Power Stroke (1999-2003) :: Replacement Hubs - How Are They Holding Up
To those of you that have replaced your unit bearing hubs on your 4 x 4's; are they giving comparable service to the OEM units? I'm replacing ball-joints right now and it would sure be easy to slap on some new hubs. The only issue is I have 130k on the originals and have been lubing them through the ABS port for the last 20k miles - the hubs seem to be in good condition. I've noticed some posters stating that since lubing an already good hub, that they are now getting a lot more than the standard 150k out of them. I also worry about replacing perfectly good US bearing hubs with most likely a Chinese bearing hub (Timken or not!).
View 10 RepliesFord 7.3L Power Stroke (1999-2003) :: Radiator Leaking - Replacement?
I have a 99.5 with 400,000. on the engine. It has been a great truck but it is time for the some TLC. I have a little leak on the radiator and the water pump and would like to replace it. I am just looking for stock.
I have a 13 yr old that grew up sitting on my lap as we drove the dirt roads around the house and on the ranch. He has been driving this truck by himself (on the ranch) as soon as he was able to reach the pedals, around 8 or 9. His happiest day will be when he gets his drivers license and can drive the truck to school. So I have a lot of work ahead of me on this truck.
Ford 7.3L Power Stroke (1999-2003) :: Tool For Replacement Of Injector Cup?
Rebuilding my 7.3 and I'm in need of the removal and install tool for the injector sleeves/cups for the 7.3 Powerstroke Diesel.
I'll pay all shipping charges and a small fee if required. I hate purchasing a tool I'll never need again, rather better not need.
Ford 7.3L Power Stroke (1999-2003) :: Stock Bed Replacement To Flatbed?
So i bought a Aluminum Flatbed to replace my rotted bed. Its about to blow off going down the road at this point. The new Flatbed is Aluminum with LED lights. I suspect i will need to wire in a load reducercorrect? Also this bed has no fuel spout so i need to fabricate something. I also plan on installing underbed tool boxes if there is space.
View 11 RepliesFord 7.3L Power Stroke (1999-2003) :: Gear Shift Indicator Replacement
I need to replace the cable on my gear shift indicator. Of course you can't just replace the cable. I have even looked on you tube and not found anything. I don't know if maybe I am using the wrong search terms or not.
View 2 RepliesFord 7.3L Power Stroke (1999-2003) :: F250 - Water Pump Replacement
How hard is the water pump to replace on 1999 f250 7.3 ...
Any thing special i need to know before tackling this job ...
Also is there any step by step instructions ???
Ford 7.3L Power Stroke (1999-2003) :: Oil Pan Rusted And Beginning To Leak - Replacement
My oil pan has rusted through and is beginning to leak. Can replace a 7.3L oil pan without pulling the engine? It looks like if I remove the turbo and fan clutch, I should have enough clearance to lift the engine several inches and get the pan to clear the crossmember. Or would it be easier to just pull the engine?
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: Lower Radiator Hose Replacement
I'm going to be replacing my lower radiator hose so figured might as well switch over to the extended life stuff going to probably go with the Delo ELC.. Supposedly it's good for 750k.
View 14 RepliesFord 7.3L Power Stroke (1999-2003) :: Re-torque During Glow Plug Replacement?
I will be changing all the glow plugs in a few days. Should I re-torque the head bolts or anything while I am in there? Don't want to button it back up and then wish I had done something while in there.
View 14 Replies