Corolla / Matrix 2009-13 :: Bolts Size For Rear License Plate?
what size bolts are needed for the rear license plate?
View 7 RepliesCorolla / Matrix 2009-13 :: Installing LEDs On MAP And License Plate
Combo of interior and internal LED bulbs. What particular bulb type to get for my MAP lights and license plate lights.
This was suggested by V-Leds for my license plate... [URL] ..... What do you think?
They did not suggest any for the MAP light, I'm thinking these are the ones... [URL] ......
Corolla / Matrix 2009-13 :: Scratched Bumper On Person License Plate?
Was parallel parking today, and bumped ever so gently into a person license plate and it scratched my bumper. Not too bad, but I notice it of course. The scratch is about an inch or so long. Are there any quick fixes to buffing this out. I have touch-up paint, but I'm afraid that will look sloppy.
View 14 RepliesCorolla / Matrix 2009-13 :: 2011 LE - Adding Fog Lights And LED For License Plate
I am planning on adding fog lights to my Corolla 2011 LE.
I am considering this one ....
and these LEDs for my license plate ....
Accent MC (2006-11) :: 2009 - How To Replace License Plate Light
I found some threads about changing the license plate light on a 2009 Hyundai Accent and all of them involved removing the plastic trim inside of the hatch. However, I saw a few people mention that they broke a few plastic clips. I want to prevent breaking any clips.
Also, this ( hyundai-forums.com/184-mc-2006-2011-accent/94825-2009-accent-replacement-bulbs.html ) thread says that the replacement lights for the license plate are 168 or 168LL, but other posters say that they replaced them with white lights. What code are they?
Regal :: 99 - How To Change License Plate Bulbs
How to change license plate bulbs? The little clear covers dont seem to pop off ........
View 3 RepliesGolf/GTI VI :: License Plate Bulbs Don't Work - Fix?
So I took my GTI in for my 10k service and to have them fix the wastegate rattle and the subframe shifting. They fixed the wastegate by installing the clip but didn't have the shims in stock for the subframe so I need to go back anyway, but I'd really like to fix my license plate lights before then.
Is there a possibility the tech could have accidentally unplugged a cable for the lights when he was rotating the tires or messing with the wastegate, etc? Maybe a blown fuse? I'm running LEDs and I already tried putting the incandescent bulbs back in but they don't work either.
Lexus ES 2007-12 :: How To Change License Plate Bulbs
How do I change my license plate bulbs in a 2010 ES350? I bought some 194 JDM Astar LEDs. I took off liner and changed backup bulbs but can't figure out how to change license plate bulbs.
View 4 RepliesLexus ES 2007-12 :: How To Replace License Plate Bulbs
I'm trying to change my license plate bulbs to LED but cant figure out how get to the bulb. I've already removed the carpeted cover but cant seem to figure out how to get the bulb out..... 2007 ES350....
View 3 RepliesLexus RX 2010-15 :: How To Change License Plate Bulbs To LEDs
I wanted to change my license plate bulbs to LED's. Can't figure out how to get to them. The book says have the dealer replace these bulbs if burnt out. I Always like to try to do things myself.
View 7 RepliesLexus IS 2014+ :: Trunk License Plate LED Bulbs Replacement
I tried doing a search on how to replace the License plate LED bulbs...
Looking for pictures or instructions on how to replace them...
Golf/GTI VI :: License Plate Bulb Out Error With Stock Bulbs?
I have an intermittent error that comes on most of the time I have my headlights on, but sometimes goes off and comes back while I am driving. It shows me the bulb out light, and says on the screen "Number plate Check license plate lighting!" I have never touched the oem factory bulbs on the license plates, and if i get out and look at the plate, both lights are on over the plate.
The only change I have made was about a year ago, I installed an LED bulb in the trunk, and ran a second OEM trunk light in the left side and installed an LED bulb in that too, tee'd off the factory trunk light housing. But like I said, that was 1 year and 30,000 miles ago, and my bulb our error for the license plate has only just started, so I doubt they are related.
Lexus GS 2013+ :: Changing License Plate Bulbs - How To Get Plastic Covers To Pop Off
How do I change my license plate bulbs? I can't seem to get the plastic covers to pop off without worrying about breaking something. Even reading about people saying the puddle lights were hard to change, i did mines in 10 minutes in the dark with a small flashlight lol.
This was a lot easier old my old g37/350z ....
Corolla / Matrix 2009-13 :: 2010 - Rear Brake Light Burnt Out
My dad has a 2010 Matrix base model, and we can't seem to get the driver's side burnt out bulb out. I did a Google/Bing search, as well as Youtube, but most results were about the Corolla, and the Matrix and Corolla have 2 different tail lights.
View 2 RepliesPrius (Gen 3) :: 2012 - Stuck When Turning Stock License Plate Bulbs 1/4 Counterclockwise
I am trying to swap out my stock license plate bulbs on a 2012 Prius.
After getting to the bulb socket holding thing, I have read that you're supposed to turn it 1/4 counterclockwise and pull but mine is stuck and won't turn either way.
Corolla / Matrix 2009-13 :: How To Replace The Climate Control Bulbs
how to replace the bulbs in a 2010-2013 Toyota Corolla I am finding older Corollas but not 2013. I did tear apart the dash but it look like they are now a self contained unit.
View 3 RepliesGolf V R32 :: License Plate LEDs Went Haywire - Dim Light
I ordered an LED interior package from Deautokey and they also came with license plate LEDs. The interior looks great, the license plates looked great except for one thing, the right side was slightly yellower than the left. So I contacted Deautokey and they sent me two new ones:
These are identical to the original LEDs except in the old ones the squares are arranged in a diamond pattern but I don't think that matters.
Tonight, I was replacing the right side LED hoping that replacing one is all I had to do to match colors but in order to see better I kept the plate lights on. Well when I went to pull out the housing I forgot that they were still on and pulled it out anyways, there may have been a noise when that happened but I forgot.
I put the new one in, turned the plate lights back on and found that it was dim, I rotated it and same look. I tried the second replacement, equally dim, so I thought "okay, I'll just give up and put the old ones in." Did that and they are now these ones became dim!
What happened!? Did pulling it out while it was still on (only did it that first time BTW) mess something up? Did the new ones being in there mess something up? There is no warning light or message in my instrument cluster.
Lexus GX 2004-09 :: Can't Get License Plate Light To Stay In
I'm in the process of replacing license plate bulbs. I broke the old housing for one of the bulbs so I bought new LED lights on eBay and they came with the housing. The problem is, I can't get the cover to stay clipped in to the tailgate. How to get the lights to stay in? What am I doing wrong?
View 7 RepliesGolf IV / Jetta IV :: 1 License Plate Light Not Working?
So I noticed a few days ago just one of my license plate bulbs blew, so I tried throwing another in and it won't light up. If I check for 12v at the housing and I have 12 where do I go from there? 2005 golf 2.slow
View 1 Replies