Ford - Aviator :: 2003 - Where Is The Purge Valve Located
Looking for the location of purge valve on a 2003 aviator ?
View 8 RepliesCamry :: 2011 - Windshield Washer Splitter Valve Replacement
How to remove the cover/sound dampener under the hood of my car to get at the splitter valve.
I know one side of it is plugged up. My left sprayer works fine but the right one doesn't work at all. I pulled the hose off the right sprayer and tried using the sprayers and hardly any fluid came out of the right side hose so I know the problem is in the splitter valve. The darn thing only costs about $3.50 and I don't want to go to the dealership and pay $200 to replace it.
My problem is, I can't figure out how to detach/remove the plastic discs that are holding the cover in place under the hood. I've tried using a pair of screwdrivers, slipjaw pliers and just my plain old fingers, but they don't screw out and they don't seem to want to pop out either and I sure don't want to break any of them.
How to get the cover off, do I need to get a different tool to pop the discs loose?
Camry :: 2007 - Where Is The AC Drain Line Located
i have a 07 camry around 121xxx on it, ive been hearing water sloshing around the dash and am pretty sure its a clogged ac line. Problem is i cant locate it.
View 3 RepliesCamry 2012+ :: Where Tpms Control Module Is Located On SE V6
I would like to know where's the tpms control module located ... I got a camry se v6 ...
View 2 RepliesCamry :: 2011 Camry: How To Check The Transmission Oil On 2011 LE (2ARFE)
how do I check the transmission oil on my 2011 Camry LE (2ARFE). I am curious as this car has 98K miles now and I cannot locate the dipstick for the Transmission oil. I got the car 2 years ago at 89K miles.
A technician once told me it's going to be a flush.
I only do 135 miles every week and I am located in Africa.
How do I check the transmission oil and how often should I change it?
Sonata I45 (YF - 2011+) :: Hesitation And Valve Rattle When Going About 60 Mph
I just purchased my 2012 Sonata GLS about 2 weeks ago and had 64,000 miles on it. Put a few hundred miles on it around town without issue and then head out on a road trip and put about 750 miles on it when I had the issue. I was going about 60 mph and went to pass a semi and when I stepped on it the car started lurching, crazy valve rattle, and seemed to lose a lot of power. Got back behind the semi and babied it until I found a place to pull over and check it out. It was 2 quarts low on oil so I topped it off and it sounded fine, running smooth and no ticking or anything. Drove it around a bit and everything seemed fine and eventually got back on the highway and running fine. Pulled over after 100 miles and another 1/2 quart low, topped off.
Another 100 miles and another 1/2 quart, but running great with no issues. 150 miles from home and it happens again when I try to pass with the rattling valves and loss of power and I have to limp it to a gas station and now hearing the valve rattle and chugging on just a slight incline and going 20 mph. Get it towed 150 miles back to the Honda dealer where i purchased it from (long story) and their tech drove it and said he thought it needed a new motor since he barely made it back to the shop. They send it over to my local Hyundai dealer, and all of the sudden it is running great again! I go and drive with the tech and hammering on the throttle and it's running like a champ. I left it for him to drive home and they put 98 miles on it without issue. I picked it up yesterday and they said to bring it back if it happens again, but totally stumped as what it could be. They did start the oil consumption test so I will update when that is done.
Azera HG (2011-16) :: Valve Rattle At Start Up
Every time I start my 2013 Azera there is a rattling of the valves like there is no oil in the top end. I have heard other owners complaining about this so I asked my dealer when I went in for an oil change. The last three changes I have asked and he told me the same thing, there is nothing being reported. So I got my oil changed and went home. Parked the car for 6.5 ~ 7 hours and when I started it up the sound was louder than ever. I called the dealer back and told them. They asked me to leave it overnight so they could hear the noise for them selves. I dropped the car off that evening.
I got a call the first thing in the morning and they said that their tech did hear something and they were going to test it again in two hours and call me back. They called back and said they believed it was the CAM phasers. They gave me the car back while they ordered parts and rounded up a loaner. I dropped it off on Thursday.
Two weeks later (today) I picked the car up. Here is what they did. It turned out to be the CAM Phasers so when they got in there they also had to replace the CAM shafts (All 4) as well. I am sure there was more going on than what they told me, after all they had the car for two full weeks!
Sonata I45 (YF - 2011+) :: Location Of Radiator Drain Valve?
I've removed the splash guard(s) and can see a bunch of different thick hoses. I have no clue what I'm supposed to be looking for in order to drain the coolant. What I'm looking for (picture would be great or a really good description).
View 23 RepliesGolf/GTI VI :: 2011 - Grinding Sound Around 2k RPM / Diverter Valve?
I currently have a 2011 DSG. I purchased it last year and when I test drove it I did not notice any unusual sounds coming from the motor/ drivetrain. However since then I have noticed that the car makes a grinding like sound when my car is around 2k-3k rpms, its especially loud under load. Its a very audible sound, like something is grinding in the transmission- Everyone that has been in my car can hear it, and it only happens at low rpms. Anyway, I took my car in once to service and I mentioned it, however the tech said he could not hear anything.
I honestly think that I got louder since then so I took it back and the shop foreman came out for a drive with me. So the guy hears the sound, but says that its the diverter valve and that its supposed to sound that way. He tells me its because the cars now have a metal valve and that its louder. I had a 2002 A4 1.8t and it never made a sound like that, even after chipped. So Im a little worried that its something else and I wont be able to get it fixed under warranty, or maybe im just paronoid and the DSG sounds like this.
Ford F-150 (2009-2014) :: 2011 - PCV Valve Removal?
How do you remove the pcv valve on 2011 5.0l. I don't want to break it .
View 1 RepliesSonata I45 (YF - 2011+) :: Valve Rattle Under Acceleration - Carbon Build Up
I have a 2014 Sonata with 22k miles. I love this car but lately I've noticed valve rattle under acceleration. Brought this up with service tech and he said I'm not driving the car on long enough trips to keep it cleaned off. When I researched the GDI very little info comes up for Hyundai mainly vw and BMW. I guess what I'm asking is is the only fix for the carbon build up removing the intake and cleaning the valves manually or is there another way.
View 56 RepliesSonata I45 (YF - 2011+) :: Transmission - Valve Knocking Noise From Engine Zone
I have a 2011 Sonata GLS with 127k miles on it and I'm trying to diagnose a problem, possibly with transmission.
Since I bought the car at 115k miles I started hearing a noise from engine zone, which appears quite rarely. Noise resembles valve knocking, appears mostly at traffic lights and colder weather (evenings). I was trying to catch the sound by recording it while using emergency brake at D pos. but the sound disappeared right after releasing brake pedal.
Describing in a different way it sounds like a propeller touching something with its blades. The sound also appears at 1900rpm on any gear (mostly when slightly releasing gas pedal around 2k rpm).
While trying to understand/fix the issue I used:
- liqui moly valve cleaner and engine flush
- techtron injection cleaner
- replaced spark plugs
These operations had almost 0 effect on car behavior. The symptoms boil down to a torque converter. Transmission shifts fine, I was going to try transmission fluid change ( a full change by dealer), however it may do more harm, so I'm not sure yet.
Camry :: 2002 V6 - PVC Valve Replacement On 1MZ Engine
I have the 2002 V6 camry and I want to replace the PVC valve. I read through the FYI/stickies, and I can see exactly how to do it on the 4 cylinder engine, are there any instructions for the 6 cylinder engine, I just want to make sure I do the right thing?
View 14 RepliesCamry :: Broken Bolt In Valve Cover?
I was loosening the bolt that holds down the number one spark plug wire when it just spun off leaving less than half the bolt in the valve cover. I tried using the grabbit extractor but that did not work.
View 8 RepliesCamry :: Valve Rattle On Cold Start
I left my car over night so that the dealer could hear my valve rattle when it was cold. Typically it rattles for about 4 miles and then never again until the next cold start. He called me today and said that he heard exactly what I reported and it was not normal. Then the diagnosis .... BAD ALTERNATOR!
I'm 52 years old, I have built cars from the frame up, I have changed and rebuilt many an alternator over the years, I have never heard one do this! If this is correct, and I must say that he has never done me wrong, I was real close to being stranded along the road!
Ford 6.7L Power Stroke Diesel :: 2011 F250 - Oil Leak On Right Side Of Engine Above Valve Cover In The Middle
I have a oil leak that I can't seem to find it appears to be leaking down above the passenger side valve cover and then goes under the engine cover. I don't notice much oil in the valley. This is a 2011 f250 6.7 with 116000 miles on it. I have had no other problems with this truck. Could this be the turbo lines? I am on a RV trip several hundred miles from home so I have very limited tools. The leak doesn't appear to be bad at this point the valve cover is wet with a small drip but it's only in the middle. I just changed my oil prior to the trip when I noticed the leak. I did have a leak on the new filter but a new filter fixed that but still have this one higher up.
View 14 RepliesCamry :: Oil Leak Coming From Valve Cover Gasket
so I have a 2azfe engine
So there's an oil leak coming from the valve cover gasket (just purchased vehicle dirt cheap with 220k)
found this
Notice all the oil sitting on top of the exhaust mani gasket
In the left(lower) part of the picture it appears to be scraped.
the gasket appears to be newer, I did NOT use a screw driver to remove the valve cover, which is what this appears to have been done..
Can this be sanded down then filled with jb weld, and then regasketed?
Camry :: 2007 2.4L Engine - Valve Lifters Order
I've got a 2007 2.4L Camry engine that I am rebuilding, and my son messed up the order that I took off that valve lifters. (the spacing thing that goes between the cam lob and the valve spring) I have my intake separate from my exhaust but I don't know where the individual one's go on the intake and on exhaust side. The book I have for the car does not tell me where they go.
View 3 RepliesCamry :: Valve Cover Gasket Replacement On 2006 V6
So I'll be taking on a project to replace the valve cover gasket on my 2002 Camry V6. There's a bit of leakage through the gasket. And while I'm at it, I'll replace the spark plugs as well. I'm looking for a write up on this project. did a lot of searching but couldn't find anything.
View 14 Replies