Camry :: 2007 - Engine Failure / Lost Valve On One Cylinder
i have a 2007 toyota camry that has lost a valve on one cylinder. 3.5 engine front cylinder on the right. is this common on just a fluke?
View 9 RepliesCamry :: 2011 Toyota SE 2.5 L Engine Fire Order - Code P0137
I need to know the Fire order for the 2011 toyota camry se 2.5 L engine. so I can find which oxygen sensor I need to change. I m getting a P0137 code and it said is the bank 1 sensor 2. I think that is the one after the catalytic converter but need to find out for sure.
View 1 RepliesFord F-150 - 1997-2003 :: Order Of Valve Cover Gasket Bolts?
i have a 2003 f150 xlt 5.4 4x4 truck i change the valve gasket cuz of a leak since it was off i paint both covers but forgot the order os bolts theirs long and short bolts can some one show me a drawing or how the order of bolts go on the both sides
View 1 RepliesPrius (Gen 2) :: 2007 - How To Replace Rear Hatch Lifters
Any good video out there to tell me how to replace the rear hatch lifters on my 2007 Prius?i
View 2 RepliesCamry :: Playing USB Songs In Reverse Order?
In order to play my songs from iTunes, I transfer them to a memory stick and convert to MP3. It plays them fine but in reverse order.
View 6 RepliesCamry 2012+ :: Change Source Order On Display - Standard LE Audio
Can change the order of the "Source" on the display? I very rarely use AM. I have to either press the arrow or view all options to see the "BT" option. I would like FM, BT, and Ipod to be the first options I see, when pressing the Source option.
View 2 RepliesCamry :: 2002 V6 - PVC Valve Replacement On 1MZ Engine
I have the 2002 V6 camry and I want to replace the PVC valve. I read through the FYI/stickies, and I can see exactly how to do it on the 4 cylinder engine, are there any instructions for the 6 cylinder engine, I just want to make sure I do the right thing?
View 14 RepliesCamry 2012+ :: Touch Screen Tire Pressure Indicator - Order Assigned To Single Row Of Four Tires
I just purchased a 2012 Toyota Camry SE, 4-cyl, with the touch screen that indicates tire pressure. However, the indicators simply show a row of tires, not matching them to wheel locations. I looked it up in the manual and it was silent on this question. What is the "order" assigned to this single row of four tires? Seems odd that the manufacturer would go this far but not label or "map" the tires.
View 14 RepliesFord Ranger / B-Series :: 1998 - Engine Noise / Sound Coming From The Lifters
I have a 1998 ranger 2.5L engine. I took it to a Ford garage and they told me I have a rod knock..........I took it also to a good mechanic and he said the sound is coming from the lifters.
There is 172000 miles on motor and the noise started at 131000, and is getting worse. Should I drive it till it blows, or is there a way to tell what the problem is?
Santa Fe (CM - 2007-12) :: Valve Or Lifter Knock Continues Until Engine Gets Warm
I have a 2007 SantaFe Limited with 40k miles on it, first thing in the morning when I start it up there is what I can describe as an valve or lifter knock and it continues until the engine gets warm then all is fine. Oil and filters have been changed on a regular schedule,,,,,is this normal??
View 23 RepliesDodge - Neon :: 2003 - Need To Rev The Engine In Order To Get The Car To Slip Into Gear
I have a 2003 Dodge Neon with 110k miles. When starting my car and putting it into gear, I have to rev the engine in order for my car to jump into gear. It also does it when I come to a light. I could be at a complete stop and the car will either jump forward or I will have to rev the engine in order for it to slip into gear. What could be the problem?
View 3 RepliesNeon :: 2003 Dodge Keep Cranking In Order To Start Up - Engine Code P0440
I have a engine code for evap sensor sometimes this can be ignored but this is causing me to keep cranking my car in order to start up what should I look for I know there's solenoid and charcoal canister and gas cap which one could be keeping my car from starting the first time.
View 1 RepliesCamry :: 2007 V6 With 2GR-FE Engine Burning Oil?
I just recently purchased an 07 Camry V6 with the 2GR-FE engine. I looked at the dipstick over the weekend and was surprised to see it was a quart low. I asked a friend about this and he informed me that Toyota engines are notorious for burning oil. Is this true? I previously owned a 94 Camry V6 that did not have this problem. Also, is there anything I can do to prevent this from happening, or slow down the burning.
View 14 RepliesDodge - Grandcaravan :: 2004 - Lifters Are Rattling
Lifters are rattling. They have been replaced and are still rattling.
View 17 RepliesElantra XD (2001-06) :: Noisy Lifters On Startup
My 05 beta 2 (CVVT) lifters are a bit noisy. On startup its a bit loud but quiets down after it warms up, but its still there. Kinda sounds like it needs a valve adjustment. Not sure if there is another way around the noise. Like a full synthetic or a heavier weight oil?
View 2 RepliesElantra GD (2013+) :: Noisy Valves And Lifters
I have a 2013 Elantra GT and I noticed the other days, couple of days, where we had really cold mornings when I started my car I could hear the valves or lifters tick ticking away. Now I know that when its cold it takes a few minutes for the thick oil to warm up but I was surprised at the noise. The car has about 200km and my wife's 2010 Elantra with about 40, 000 km doesn't make any.
View 9 RepliesGMC - Yukon :: Oil Pan Leaking - Lifters Knock When First Started
I have a 2002 GMC Yukon with 195,000 miles. The oil pan is now leaking and it needs a new gasket. It has 40psi oil pressure at idle. The lifters knock when first started. Should I replace the oil pump when the pan is pulled to replace the gasket? What else should I change while the pan is off with this high mileage vehicle?
View 1 RepliesCamry :: 2007 XLE V6 - Loud Knock In Engine
I have a 2007 Camry XLE with 30,000 miles on it purchased new.I stated it up the other day after setting all night it had a very loud knock in the engine I shut it off and had it towed to the dealership. They started it up and wanted to know what happened they said it sounded like a rod out. They keep it several days and ended up doing a top engine flush and then replaced the spark plugs. They said it was a carbon build up.I asked if they suggest any thing to keep this from happening and they said they do not recommend using any thing. I thought carbon deposits were supposed to be a thing of the past. Does this still happen.
View 4 RepliesCamry :: 2007 - Engine Shakes At Idle
I changed the battery in my wife's 2007 Camry couple of days ago and the engine shakes at idle. It seems to be getting better so I am thinking the computer is relearning how to idol. Another problem it has now is the gas display. My wife says it does not seem to be showing the correct cruising range for the amount of gas that was pumped. Could this be from the computer having to relearn everything?
View 14 Replies