Ford F-150 - 1997-2003 :: Truck Is Misfiring / Blown Head Gasket Cylinder 6 On Driver Side
Ok I got this truck from my mother-in-law for free with a blown head gasket cylinder 6 driver side. I did the replacement had the heads machined put it all back together by the book. Now I can't get it to fire on all 6 cylinders only 5 I think. Thought maybe bad gas (it sat since late November) put 5 gallons (over double the gas) fresh gas and half a bottle of b-12 chem tool. Dubble checked all plugs wires connections (coils plugs wires all new). I drove for about 10 miles oil pressure and temperature stayed perfect but no change in running truck shakes a lot and no real power. Don't sputter or backfire no engine codes other than imcr bank 2 open. Engine is 4.2l v-6 170k miles.
View 2 RepliesCamry :: 2005 - Head Gasket Leak / Coolant Puddle From The Rear Of Engine
I have the 2.4l engine and the car has 177K on it. Bought it from a friend at 60K and never had a problem with it. I started getting the coolant puddle from the rear of the engine. We took the intake manifold off and saw that the head was leaking in the rear. Real small drop forming and then falling. No codes at the time either. Seems this car has problems with the Engine bolts and was wondering how many people out there had a blown head gasket and there was no bolt issue?
Also I know this is not the right thing to do but use Engine Block Sealant? This is the kind that you drain your antifreeze,flush twice and then run this stuff in it for little while and then replace with antifreeze.
I am upside down on the car because I put 50K a year on so don't think I will get anything for trade. I am hoping my brother in law and I can fix it but am wondering what the odds are there is a problem with the bolts.
Ford F-150 - 1997-2003 :: 1998 4.6 Triton - Slow Coolant Leak - Head Gasket?
New truck to me. Truck was advertised with a slow coolant leak. Figured I would trace the leak down and get it repaired no issues. Anyway, working on it this evening I take a close look around the oil filler area and notice the dreaded milkshake color.
I drained the oil out of the truck and the oil actually came out nice and black. Is the headgasket the only area that would cause the oil/coolant mixture? Supposedly the truck has never been overheated.
At any rate, on to find articles on how to pull apart a 4.6L Triton head. I'll see if I'm up to this challenge.
Ford F-150 - 1997-2003 :: 2001 V6 Head Gasket Leak Causing Water To Enter Into Cylinders And Oil Pan
Recently bought a 2001. In the process of reading about this engine I discovered there is a some what regular breakdown of head gaskets causing water to leak into cylinders and oil pan, all of which is serious.
Given the vehicle is 12 years old and has 89K miles it appears it is in the age and range of where this leakage can occur. Any knowledgeable engine rebuilders that are familiar with this issue on the 4.2 have any comments???
1. Can this issue be avoided by replacing head gaskets now rather than waiting for future failure???
2. Are there new and improved head gaskets for this motor???
3. Does the problem occur on both heads gaskets?
4. Is that all that needs to be done or are there other seals that need replacement???
Camry :: 2003 - Kicking Noise From Head Gasket
Yesterday my 2003 camry has kicking noise from head. i am not sure it is broken valve or the VVTi broken. the oil look like silver. There is no cel code and car run ok.
View 7 RepliesFord F-150 - 1997-2003 :: Head Gasket On Passenger Side Number 3 Is Leaking
I have a 97 with a 4.6 Triton motor I need to replace the head gasket on the passenger side number 3 is leaking nothing else is wrong with motor so I have it torn down to timing chain cover and ready to remove. do i have to take the drivers side valve cover completely off to take timing chain cover off or can I take to first 2 studs out of the drivers side front valve cover and side the timing cover off. I just want to replace the passenger side head gasket and get rid of truck.
View 6 RepliesAccent MC (2006-11) :: Oil Leak Between Head And Block In Front Driver Side
Recently replaced the head and gasket on 2010 accent blue. Torqued to factory specs. There is an oil leak between the head and block in the front driver side. Can i tighten that bolt? Is there a break in period, do i need to re-torque or buy another gasket and head bolts?
View 7 RepliesFord F-150 - 1997-2003 :: Leaking Antifreeze Externally At The Front Of Passenger Side Head Gasket?
Working on a 2000 F150 with the 5.4 and as near as I can determine its leaking antifreeze externally at the front of the passenger side head gasket. Seems a little odd. The coolant is a nasty dirty orange color. With the truck running on the hoist it was dripping very steady off of the very front exhaust manifold bolt.
View 3 RepliesFord Super Duty (1999-2016) :: 2003 F250 - Leaking From Rear Of Passenger Side Head Gasket
So I've put about 1000 miles on my 03 F250 since buying it, and just the other day it's started leaking from the rear of the passenger head gasket. Enough to drip on the driveway and exhaust, and have some exhaust smell. 126,000 miles, 5.4
I've checked with my local ford dealer, and It also needs passenger exhaust manifold and studs, so the dealer price to tack that on would be a whole lot more too since there are already a couple studs broke. It would be best to get it done when the head is pulled.
I've checked with several local mechanics, and none of them are interested in pulling the head on this engine. That has me concerned about doing it myself too..especially since it fits in my garage with only a few inches to spare..
Golf/GTI VII :: Head Gasket Leak?
Is this normal or do I have a leak? Noticed this white stuff just like what you would find on the coolant cap, as well as this red stuff too.
View 7 RepliesSubaru - Outback :: How Bad Is A Head Gasket Leak
My Subaru dealer just told me that my 2004 outback with 88k miles has developed a head gasket leak. I haven't noticed any symptoms, and the leak started sometime between now and my last major service 10k miles ago. How serious is this? They want to charge me for it? If so, when? Is disaster imminent?
View 7 RepliesCherokee :: 2006 JGC HEMI Head Gasket Leak?
I have a 06' JGC with the 5.7L Hemi w/80k and about a month ago I noticed a little smoke under the hood after driving, I found an oil leak and it's running down the passenger side of the rear main seal but the leak is above the seal. I had the shop put die in it and they dont know for sure but they belive it is the head gasket. There is no water in the oil but they said that doesnt matter. Apparently the heads cant be resurfaced on hemi's but they have to be checked to make sure they are in spec.
View 2 RepliesOldsmobile - Alero :: 2000 - Head Gasket Oil Leak
Have a 2000 Alero. Mechanic says oil on ground is from leaking head gasket. $3000 to repair, or buy rebuilt engine for about the same. I thought head gasket leaks were into the coolant, not outside. Is this legit, including the cost? Valve cover gaskets were replaced earlier this year. Should I get another opinion? Other possible sources of leak?
View 2 RepliesSanta FE SM (2001-06) :: Small Leak In Head Gasket
I've been told that the 2002 Santa Fe that I drive has a small leak in the head gasket and that this will be a major problem for the A/C compressor in the not-too-distant future. Supposedly the compressor is located below where the leak is and that over time (5-6 months) this can/will cause the compressor to need to be replaced. Does this seem like a credible scenario?
View 2 RepliesGolf VI R :: 2012 - Coolant Leak From Head Gasket
I have 2012 R with 33,000.00 miles on it. During regular service they detected that I have a coolant leak. They replaced a flange and determined that there was actually a head gasket leak. This is very unusual for such a low mileage. The car is still under extended warranty and they are in the process of replacing the head gasket. They told me today that they have to machine the head since there was some residue due to the coolant leak. This is all done at a VW dealer service.
View 1 RepliesChevrolet - Blazer :: Coolant In Oil - Leak In Head Gasket?
I found during an oil change that there is coolant in my oil, I had suspicions of this because of having to add coolant more than I should of had to. There is probably either a crack in my block, head gasket or intake manifold, my question is how can I tell which. I figure that if I preform a compression check it will tell me that I have a cracked block and or a cracked head gasket, what will tell me if I breeched my intake manifold.
View 19 RepliesSubaru - Outback :: Oil Leak After Head Gasket Repair
I recently had an issue with my head gasket. It was repaired but then learned the real issue was that I had diesel gas in my engine. (Long story, fuel hauler put wrong gas in tank and service station sold the gas to us unsuspecting drivers.) After head gasket was fixed, tried to leave service shop but car still had issues - turned around and went back. O2 sensor and other fuel trim numbers were off. But couldn't diagnose problem completely so told me to drive home (30 miles) and come back next day.
That's when I found out about the diesel gas issue. My car got drained of bad gas and cleaned. Got car back but now is leaking oil. My husband thinks it is either from the valve covers or from head gasket. Can diesel gas in your engine damage the head gasket? Could I have done more damage by driving the 30 miles home with the bad gas? Or did the shop just do a bad head gasket repair? I only bought this car 6 months ago - used. It now has 88K miles.
Ford 6.0L Power Stroke Diesel :: 2005 - Leak At Fuel Line Fittings Near Driver Side Cylinder Head
2005 PSD 6.0L Excursion ... I suspect that have a fuel leak at the fuel line fittings near the driver side cylinder head. (I believe that it is fuel, since it is so clear, I guess I should collect a few drops and see if it burns vs. coolant.)
It appears to be at the junction of the fuel lines. This is the point where the fluid drops off the tubing and falls down. The clip that holds the two tubes together at the joint is very dirty, the one below them is clean. The tag on the line that is at the joint leaking is part number 3c34-9j338-ag. Is there a o-ring in side the joint? Do I need to replace both hoses of the joint? I can't find any posting of a history of this fuel line leaking.
Or... is it that the joint never fail, and the leak is up tube? I can't see any where it is coming out when viewing it from the top.
Ford 6.0L Power Stroke Diesel :: Fuel Leak Coming From Banjo Bolt Going Into Front Of Driver Side Head
I've experienced a fuel leak, I've checked all over, and the only thing I've came up with so far, was maybe its coming from the banjo bolt going into the front of the driver side head.. I cant really get to it good enough to tell though..
View 6 Replies