Prius (2004-09) :: Wiring DRLs To The Parking Lights?
I see heaps of cheap LED DRLs (audi style) at car accessory shops that say they wire up the the 12volt parking light switch thing, the problem is where this is or how to do it?
View 1 RepliesFord 7.3L Power Stroke (1999-2003) :: Wiring Diagram For Small LEDs?
I am looking at putting a couple small LEDs in the pinch weld area under the doors on the cab. I want to have them come on when I open up a door. Where is the best place to grab power from the door switch circuit for that? The passenger side I was thinking of grabbing it where it goes into the sleeve between the cab and the door, but on the drivers side there are a lot of things in the way to get to that point. Can I pick it up down in the door jamb area? Is there a wire going to the dome light there?
View 8 RepliesFord 7.3L Power Stroke (1999-2003) :: Adding LEDs - Wiring Harness?
I am going to add some led's to illuminate the steps getting into my truck at night. I plan on putting them directly under the door over the steps. Is there a wire under the door threshold I can tap into at each door? If so what color? If not, where to get the power from. I want them to turn on and off with the interior lights when doors are opened.
View 1 RepliesGolf IV / Jetta IV :: 2003 - Instrument Cluster / Interior LEDs Work Sometimes
I just picked up an '03 Golf and decided to put in the euro switch I had from my old Jetta. When I turn the headlights on (either parking or full) the instrument cluster blue back lighting and the red interior LEDs work only sometimes. When they work, they all work, but probably about 9 out of 10 times, they just won't come on at all, so I have to sit there turning the switch on and off repeatedly until they do come on. What could be causing this? It's definitely not a fuse since they do come on eventually, so my first thought was maybe a relay, but which one? What else could be going on?
View 5 RepliesAccent RB (2012+) :: Trunk Release Doesn't Work Anymore
I have a 2013 Accent SE and am having trouble with the trunk release -- it doesn't work. It looks like the part in the trunk may have come loose or something.
View 9 RepliesAccent RB (2012+) :: 2013 - Transmission Doesn't Work / Lost Fluid
Trnasmission problems? Plug came off lost fluid. transmission doesn't work.
View 2 RepliesCamry 2012+ :: Installing DRLs In Different Position?
I don't like how they aren't in the middle of the slots of the front bumper. Where the chrome strips are. I wish they were in the middle of that, instead of towards the outside.
In this video the technician shows that there are holes that you need to drill. This allows you to fasten the DRLs to the bumper.. can I drill the holes in the middle? Would it look stupid up close?
[URL] .....
Golf VI R :: 2012 - LED Fog Light DRLs Replacement / Removal
So looking to replace the passenger side front LED fog light assembly as the one that's currently on the car has a bad seal or something and lets water in. I have a new LED assembly but I'm lost with how exactly I'm to get the new part in. I've searched for diagrams regarding the replacement of the part and found one diagram that said the front bumper had to be completely removed from the car but I find that a bit hard to believe... (Then again its euro so maybe it's not hard to believe). Can the lower intake grill on the passenger side not just be pulled out or something? 2012 Golf R MK6....
View 2 RepliesPrius Plug-in 2012-15 :: HUD Green Leds Appears Broken
No response to the buttons that have green leds glowing no obstruction in HUD output area appears broken, so have the 8 year 100000 Warranty,I would expect that to be covered.
View 13 RepliesFord Wiring/Electrical :: Flashers Don't Work / High And Low Beams Work
2004. Hazards and brake lights work.
View 6 RepliesFord Super Duty (1999-2016) :: 2012 F350 - How To Disable DRLs
How do I disable the day time running lights on 2012 f350?
View 4 RepliesFord Wiring/Electrical :: 2012 E350 - Wiring Diagram?
Where can I find/buy a wiring schematic for a 2012 Ford E350 with the 5.4 L V8?
View 1 RepliesFord Wiring/Electrical :: 2006 - Fog Lights Don't Work?
I don't know if this goes here but I ha a ford f350 king ranch 2006 I got it 5 months ago the fog lights never did work. One of them was burnt out.
I replaced them both today and checked the fuse and they do not come on. I checked the fuse under the dash kick box. What else could be going on here hat I can look into?
Ford Wiring/Electrical :: 2003 - Instrument Panel Does Not Work?
03 F250 Instrument panel does not work. Have checked all fuses with a meter. Have already fixed broken wires from the OD button on shifter handle. and also the alternator is not charging. I need wiring diagram that shows the wires coming out the back of the fuse box so I can see if the fuse holder is burned out......
View 8 RepliesFord Wiring/Electrical :: No Power To Fuse 32 And Stereo Does Not Work?
I recenty was having some problems with my 2003 6.0 liter. My FICM connection was not seated all of the way which casued my truck to just die without warning....... AFter I had fixed that, my stereo died. Just dead??? Nothing...EVERYTHING ELSE WORKS???
So, after I had messed with everything I could think of, I thought, OK new DVD/Stereo time.
I checked fuse #32 which was the fuse to my stereo. The fuse is fine...BUT...There's no friggen power to the fuse via my test light. Test light works on other fuse spots so I know i"m not getting power to the fuse #32.
Since I don't have any power to this fuse....WHAT NOW???? How to trouble shoot this problem?
Ford Wiring/Electrical :: 1992 F250 - Blinkers Will Not Work
I recently bought a 92 F250 and love it but the blinkers will not work. I have replaced both flashers and the multifunction switch. (the wipers had issues too that were fixed by the switch...) Now what? Im at a loss..
View 7 RepliesFord Wiring/Electrical :: 2003 F250 - Flashers Won't Work
My work truck is an 03 F250 5.3L. My flashers recently stopped working. I turn them on, and they will work anywhere from 5 seconds to a few minutes, then either blink rapidly and shut off, stay solid for a few seconds and shut off, or just shut off. I push the switch off and on again, and the cycle repeats. All my other lights and turn signals work fine with no issues.
This wouldn't be a huge issue, but where I work I need the flashers a lot. The truck has a bar light and siren/pa system wired into it, but not to the lights or anywhere near that. I can't say exactly how it's wired because I didn't install it, but I followed the wires and they don't go under the steering wheel where I would assume the relay and wires for flashers would be.
What sounds like is wrong? I wouldn't think it would be the relay because then I would think that I would be having problems with more than just the flashers. So I'm not sure if there would just be a ground issue or if it's the actual switch that turns on the hazards. Also, there are no lights that are burnt out.
Ford Wiring/Electrical :: 2007 - Reverse Lights Won't Work?
so I recently purchased a 2007 f350 SCSB and my reverse lights don't work. I am trying to trouble shoot the cause... So far I've replaced the bulbs and tested the plugs and im not receiving any power to them... Where to start to look for the problem?
View 3 RepliesJeep - Electrical-wiring - Wrangler :: Wipers Don't Always Work / Quit Without Warning
I have a 1999 Jeep Wrangler Sport 4.0L with a kind of serious problem. My wipers dont always work. Sometimes they work fine, sometimes they work fine to start with and then quit without warning, other times the only way to get them to turn on is to turn them on high and then go to the speed that I want to use. It has the intermittent option but I am not yet convinced that that has anything to do with my problem. They will quit working some of the time while using the delay but they also quit on low sometimes. I have been through and checked all of the plugs, and even went as far as to grease them up so I know they are making good connections. I'm at a loss, I would think if it were the motor or the switch it would just go out all together. And if it were a broken wire, wouldn't it come on and go off if I hit a bump in the road? They shut off on smooth roads so bumpy or smooth does not matter.
View 1 Replies