Chrysler - Ptcruiser :: 2007 - Clunking Noise Up Front Underneath
Why is my PT Cruiser making a clunking noise up front underneath. Mechanics say the can't find why -- Struts seems ok.....
View 3 RepliesChrysler - Ptcruiser :: 2006 - Squeaks From Front At Slow Speed?
My 2006 PT Cruiser Touring Edition has a lot of squeaks from the front. Most noticeable at low speed going over speed bumps or potholes. My mechanic has checked front end and says noise is coming from rear cradle bushings and wants to drop rear cradle and inspect/lube bushings. Also says sway links are dry and recommends lubing these as well. Everything else is OK. Estimate is $100-$150. Other than the annoying squeaking (which I can live with) is there any other reason (safety/mechanical) to get this done?
View 2 RepliesChrysler - PTCruiser :: Clicking Sound Coming From Near The Left Front Tire
I have a 06 PT cruiser with about 70k miles.About a month ago a small click started near the left front tire. I thought it was a pebble and checked the tire to find none. It increases volume and frequency with speed. There's no vibration or grinding. Brakes are good, and I just had the bearings replaced about 6 months ago.
View 5 RepliesChrysler - Ptcruiser :: Screeching Noise Coming / Car Won't Stay Running
I have a 2007 pt cruiser, and it's oh I'd say -10 degrees outside. Of course my car will not start. I attempted to recharge the battery and no such luck. It sounds like everything is turning over correctly. It's just as soon as the car starts the engine shakes and makes a loud screeching noise then shuts off. Now I can't tell if it's just too cold and something is frozen or there's something wrong with one of the belts.
View 5 RepliesChrysler - Ptcruiser :: 2005 - Grinding Noise In Engine Compartment
I have a 2005 PT Cruiser non-turbo. A short time back, the tensioner bolt broke on the alternator and after spending several months going back and forth with the dealer, I was finally able to find the correct size bolt to replace it. Shortly afterwards, I began to hear a scraping sound coming from the engine compartment. The sound is sporadic, and only lasts for a short time. The sound only appears to happen when the engine is idling down when coming to a stop, and it doesn't always do it.
It doesn't make the noise when accelerating, in fact, the noise quits when I accelerate. The noise sounds like metal being drug on concrete, or a grinding sound. Is this a possible bearing going out on the alternator or possibly the AC clutch/bearing? The noise is not present during normal driving conditions, just when the car is almost at a stop and stops as acceleration occurs. I have reached in to see if possibly a loose pulley/bad bearing on the alternator, but there is no slack there. Is it possible that I have the alternator belt too tight, or is this another issue?
Acura - TL :: 2005 - Thumping Noise From Front Wheel Area
I replaced both 1/2 axles last week after one CV boot pretty much disintegrated. Since it is a 2005 Acura TL with 146K miles, I changed both axles completely. BTW - I had NO forewarning, noises, etc. before the axles died last week! I only perceived an increase in road noise, but did not hear noises squeaks, thumps, clacks, etc.!) The first day I drove the car after the new axles, I noticed a thump, thump, thump from the right wheel area when I made a sharp, slow turn out of my driveway. It only happened once, but it was a quick trip.
The next day, I noticed it again as I pulled out of my driveway and later as I pulled into a parking spot. There are no other symptoms and it only occurs when the wheel is turned to an extreme (80-90 degree) at little to no speed. I tested it in an empty parking lot - slow circles in either direction will cause the thump, primarily coming from the right wheel area. I immediately drove to the repair shop and made an appointment. Why I'd develop a new thump immediately after getting new axles? I'm thinking something isn't right with their installation. Of course, they say nothing is wrong with what they did - the problem now is that I need stabilizer links?! Sounds like BS to me - why all of a sudden do I need BOTH stabilizer links immediately after repair work?
Gmc :: 2002 - Roaring Noise In The Area Of Left Front Wheel
I have a 2002 GMC Senoma 4WD. I have recently noticed a roaring noise in the area of the left front wheel, The noise is associated with rotation of the wheel. There is no unusual tire wear or shimmy. I rarely use the 4WD however when I engage the 4LO option the noise gets louder.
View 3 RepliesMercury - Villager :: Scraping Noise Only In The Left Front Wheel Area
2000 Mercury Villager. Noise in the left front wheel area only. Listened to both sides and zero noise on the right side. It's a metallic scraping noise. It's increase frequency as you speed up much like a train does as it speeds up. And stops when you push on the brakes. Doesn't seem to be related to steering.
View 2 RepliesSubaru - Imprezawrxsti :: Clicking Noise From Passenger Front Wheel Area
I have an 04 WRX, I've upgraded the suspension (1.5" - 1.75" drop front and back respectfully) and have a full set up of strut tower braces. Recently when accelerating from a stop, I get a clicking noise from the passenger front wheel area, I hear it all the way through first, second, and most of third...the sound is probably present after that but my exhaust drowns it out. My first choice of problem is that the CVs have gone, the car has 140k on it...
View 2 RepliesLexus GS 2013+ :: Metal Clinking Noise Coming From The Right Front Wheel Area
The last couple of days I've noticed a metal clinking noise coming from the right front wheel area when I go over bumps. The best way I can describe it is what it sounds like when there's a loose washer and nut on a bolt. A metal on metal sort of thing. Tonight I was able to replicate the sound I heard by pounding on the tire and got it on video and posted it below. Watch in HD to hear the sound I'm referencing clearly.
[URL] .....
A couple of things to consider:
1. Just had spacers installed a few days ago
2. Also diagnosed the "clicking brake while turning slowly" issue. Thread about it here: [URL] .... Wondering if this has anything to do with the noise.
I have an appointment with Lexus tomorrow morning to have the brake clicking fixed under the TSB and several other issues addressed. Mostly rattles...
Elantra MD (2010-15) :: Squealing Noise From Front Driver Side Wheel Area
About 6 weeks ago I noticed a noise coming from the front driver side wheel area. We had just gotten the tire rotated and once at freeway speed it was like a squealing noise, just like when you have worn brakes. Since then the squealing noise is gone and now it's a faint (hard to describe over text) "whomp whomp" noise as if I have off-road tires. I notice it more on freeways I supposed because it's a smoother straighter surface. On a particular right bending street by our house it's louder. What it might be? Car has 36k miles.
View 8 RepliesElantra MD (2010-15) :: Loud Grating Noise From The Passenger Front Wheel Area
I have a 2011 E Sedan and recently started hearing a loud grating noise from the passenger front wheel area. It only happens when turning the wheel to the left. It isn't a popping noise like the traditional CV Joint and the boot is still intact.
I jacked the front up today and put it on jack stands. I pulled the tire, caliper, caliper mounting bracket, and rotor to look at the dust shield and there was no sign of it rubbing, nor was there any other wear marks. With everything still disassembled, I turned the wheel hub with my hands and noticed the same, though fainter, sound. I started the car and put it in drive and once again the same noise was coming from the hub assembly area, although I didn't use a stethoscope to listen.
The noise is more profound when under load turning left, but it still seems to coming from the same area. My plan is to replace the entire wheel hub assembly since they aren't that expensive. That, and I don't want to go through the headache of puling everything apart to simply replace the bearings.
Subaru - Legacy :: 2011 Outback Clicking Noise Fro Right Front Wheel Area When Turning
I bought a new 2011 Outback about 3 weeks ago, and I have around 1500 miles on it.
A couple days ago I started noticing a clicking noise near the right-front wheel area whenever I turn for the first time after I start the engine (releasing handbrake, shift to Drive, etc). This happens only one time per drive, and mostly after I turn to the right for the first time. After hearing that sound, the next time I will hear it is only after I park and shutdown the engine and restart.
Toyota - 4Runner :: 1991 - Loud Noise Coming From Front Right Wheel Or Somewhere Close To That Area
I have a 1991 toyota 4runner with 4wheel drive stick shift and it has been making a loud rrrrrrrrrrrr sound. It seemed like it was coming from the front right wheel or somewhere close to that area, so I checked the brake pads and rotor for rocks or any other object that might have gotten stuck. There was nothing stuck, however I did notice that the boots were ripped. So I changed both front axles and I also replaced the wheel bearing only from where the noise appears to be coming from. The noise is still there. It makes the noise sometimes, if i'm going slow or fast. Other than that, the car drives well.
View 2 RepliesSonata I45 (LF 2015+) :: Rotational Tapping Noise Coming From Front Passenger Wheel Well Area
2016 LTD Ultimate, 2700 miles. First and only Hyundai for the moment.
I've experience this one twice, a few weeks apart: cold start the car, and in the first 100 yards or so I'll hear a tapping noise that's clearly rotational, varies with speed but eventually ceases. Sounds like it's coming from front passenger wheel well area, and sounds like a stick or some sort of debris is stuck in the wheel. Both times I've inspected the area and found nothing whatsoever.
I live in an apartment complex area, park in a lot always in reverse so I'm always going from park to drive. The area I live in is wooded ("Pine Barrens" region of Long Island) but the roads are paved so it's not like I'm driving thru wilderness.
Yaris/Scion & Vitz :: Noise Out Of The Front Right Wheel Area When Make Hard Left Turn
Basically, when I make a hard left turn I hear a noise out of the front right wheel area. I do not hear anything in any other condition. It sounds like something rubbing up against something else. I know that my rims are in good shape - is this an outer or inner bearing issue? Or is this something completely different?
View 2 RepliesPassat (B5) :: Light Tapping Noise Coming From Front Passenger Side Tire Wheel Area
I recently started getting a light tapping noise coming from the front passenger side tire wheel area. It almost sound like a nail stuck in the tire, but lighter in sound and there is nothing stuck in the tire........
Here's the kicker: It only happens when I turn LEFT!!!! I checked and there is nothing obvious that sticks out to touch the tire when it turns...
Nissan Maxima :: 1998 - Tapping Noise Developed In Front Driver Side Wheel Area
I have a noise that has developed in the front drivers side(wheel area). When I turn right -- it can only be heard at slow speed, when I start from a stop-- there is a " tapping" type noise that appears to come from the wheel area. Is it possible that I am about to have problems from the CV axle?
View 1 RepliesSanta Fe (CM - 2007-12) :: 2008 3.3 AWD - Clicking Noise Coming From Driver Side Front Wheel Area
I've got a 2008 santa fe limited 3.3 awd with about 170000 km on it. Lately when I brake I've been hearing a clicking noise coming from what sounds like the driver side front wheel area.
Had it in to my mechanic who checked the brakes and said that pads/calipers/rotors were all fine. They replaced the passenger side front bearing on the lower control arm a few weeks ago and said there is no play or noise coming from any other suspension components.
Where to look next? My mechanic isn't sure what it is so I was going to take it to the dealer and see if they can fix it. Also had new tires installed about a month ago