Jeep - Grandcherokee :: Door Panel Removal To Gain Access To The Bottom Of Window
How do I remove the passenger side rear door panel to gain access to the bottom of the window to jam it in the closed position, 2004 Jeep GC. Window regulator cable broke, window slid down, I pushed the window up & shimmed it with a door stop to keep it up. Replacing the regulator & cable is very expensive & I don't care if the window works or not. I removed a screw from behind the inside door handle & from the grip cup (used to close the door) & pulled the top of the panel about 2 inches away from the door. It appears that something beside the snap-in clips is preventing the rest of the panel from popping off.
View 2 RepliesPhaeton :: Access To Fuse Panel Inside Car Under Driver Side?
How to access the fuse panel inside car under drivers side can't seem to get it open
View 3 RepliesVolvo :: Fuse Panel Removal To Change The Socket In Relay
I have access to the fuse panel but I need to remove the panel to reach the relays. I need to change the socket in the relay panel because one is burnt out. I change the K(headlight)relay and when my car is off and key out of the ignition my lights are still on.
View 10 RepliesPrius 2016 (Gen 4) :: How To Remove Panel To Access ODB
I don't see how the panel below the steering wheel opens to access the ODB port to try out Carista. I played around with the little plastic piece that sticks out and tugged without luck. I could find any YouTube videos either.
View 6 RepliesGolf/GTI VI :: Fog Light Access Panel Coming Off
I have a 2010 4Dr GTI and have a strange and simple problem. About a week ago when I was washing my car I noticed I was missing the small oval cover that is in the wheel well that gives you access to the fog light bulbs etc. I had never noticed if they were ever there, but remembered seeing them in a picture here on the vortex.
When I walked around to the other side to clean the other wheel I noticed that that cover on the other side was also missing. I thought I had them before because I think I would have noticed a gaping fist sized hole in my finder liner, but the chances of them both coming out seemed improbable so I just figured I wasn't as observative as I thought I was.
I called the dealer and ordered two new covers, one for each side. A few days later they came in, I picked them up, and put them in. They were cheap enough and it was easier than bringing the car in for service. After I put them both in I decided to removed one just to see how snug they fit. They fit fairly tightly and I went on to think that they just did not come with the car. Now 3 days later both pieces are gone again!
In the last three days my car has been driven about 150miles. Mostly city driving no speeds higher than about 55. I do not think they are being blown or sucked out by pressure. We have some of the worst streets in the country down here in New Orleans but I don't think the bumps could shake it loose. I checked underneath my front bumper to make sure I had not hit a dip hard and scraped and I have not. the whole under-tray etc is in immaculate shape still.
Golf/GTI VI :: How To Access Relay Panel Located In Dash
The horn on my 2010 golf recently went out, so I'm thinking that one of two things happened. Before the horn went out completely, one tone died, then about two months later it stopped working completely. When I press the horn, I hear a click coming from the dash. So, I think it's either a bad relay or both horns went out. How likely is it that both horns go out within a few months of each other?
Anyway, I bought a new horn relay, but how to access the relay panel located in the dash. How to remove the dash sections, or is there a good write up?
Golf/GTI VI :: 2012 / 2.5L - Rear Quarter Panel Access For Dent Repair?
getting access to the back of the rear quarter panel for paintless dent repair? This is for a 2 door 2012 Golf 2.5L.
I've heard from a few people that there's likely some sort of access point for this car but I haven't gotten any specifics. I'd rather not have the PDR guy drill a hole in the wheel well for the needed access.
I do see what looks like factory hole with rubber cover behind where the door closes (lower part) ..
Here's the location of the dent (dent itself is not visible at this resolution, but it's right at the point of the crease):
Golf/GTI VI :: Driver Side Front Fender Liner Missing Access Panel
If the driver's side fender liner is supposed to have an access panel cover? I was swapping out my side markers today and noticed that my passenger's side has one but not the driver's side. Didn't think to check for something like that during delivery although from looking at the one from the passenger's side, it doesn't seem hard to believe that it could have fallen out due to spirited driving.
View 3 RepliesPrius C :: A-Pillar Removal - Access To Fuse Box On Driver Side?
Starting to build up some confidence to do my auto dim mirror install myself. How do you remove the A pillar on the driver's side? Is it difficult to do?
Also, in the manual, it says there's a fuse box under the driver side instruments... how do you get to that? Looks like there's a cover to remove?
Volvo :: Timing Belt Tensioner Broken - Bottom Of Valves Melted
I recently bought a 97 960. i have had a s90 before in totaled it i loved the car so much i found another. i was driving and broke the timing belt tensioner which in turn lead to the breaking of 5 exhaust valves that i know of. I've taken off the head and noticed that one of the bottom of the valves had melted onto the number 5 piston head.
I called around and search but every motor is at least 1000 and i have been told anywhere from 3500-4500 to rebuild. My question would b is there an easy way to fix or should i junk it. i bought it for a 1000 it has only 140000 on it an its in almost great condition. I attached some pictures of the head and piston so u can see the damage.
Attached File(s)
2012_04_07_19.02.39.jpg ( 1.45MB )
2012_04_10_16.45.26__1_.jpg ( 1.43MB )
Camry :: Flashing Blue LED In Fuse Panel
I just noticed today there's a flashing blue LED in the fuse panel of my 2006 Camry. Just wondering if this is normal or if it indicates something is wrong?
View 2 RepliesTiguan :: Instrument Panel Flashed - Fuse Box Melted
While driving the other day, the instrument panel flashed showing a bulb out. I pulled into my local auto parts store down the street figuring i blew a bulb, no biggie. When i got out all bulbs were working... So i let it go and figured the light would go out, and it did a couple hours later. Yesterday when my girlfriend was driving the tig home from work she called saying that the light came on again but the whole right headlight was out... Hi beam, low beam, fog light and turn signal.
So when she got home i checked the bulbs, they were fine so i figured i would pop the fuse box and what do you know the fuse for the right headlight was melted. the fuse below it (horn) was also melted but still worked. So i drove it to West Broad VW (where i bought it) told them what was wrong and sure enough they said the fuse box needed to be replaced. The worst part about it was the few technicians that were in the service area both new what was wrong when i pulled up... and said it has been a common problem for our tigs and jettas...
Ford Excursion :: Where To Mount Auxiliary Fuse Panel
I like the looks and ease of adding on circuits. Just haven't found the best place 5 put it. Mounting one of these in the cabin? I want to hook up my mirrors, dash cam, and future add ons without a nasty pile of wires hanging from the original fuse box.
View 1 RepliesCamry :: 2004 - Dash Fuse Cover Panel Keeps Falling
Was riding along a couple of days ago and felt something odd under my left foot. When I stopped I reached down and discovered it was the dash fuse cover panel. I went to snap it back into place and no snap; it wouldn't pop back into place or stay put at all. Just keeps falling out. It was sufficiently annoying that I ordered a replacement, but that one's not staying in place either. The only other thing I can think of is that the surrounding lower dash cover may be warped, but nothing looks crooked or out of place.
View 1 RepliesPhaeton :: Clicking Sound Coming From Two Cylinders Near Fuse Panel
Still trying to track down my electrical issues. While poking around in the engine compartment near the fuse panel by firewall - i heard a clicking sound coming from the two cylinders near the fuse panel.
They are cylinders - side by side - about 1 1/2 inch wide and 2 inches tall - with electrical connections and either fuel or vacuum lines attached. What are these? Some sort of solenoids? Are they part of the EVAP system?
How long should they continue to "click" after the car is turned off? Mine kept going for a half hour. I then disconnected the left side battery and it stopped. 5 hours later after fully charging the battery I hooked it up again - and the clicking came back. Is this normal or could it be a source of my battery drain?.
Ford Ranger / B-Series :: Fuse Box Panel Cover Missing
I've a 1994 Ranger XLT 4.0L with a missing fuse panel cover. I'm trying to get the horn to work and we've traced the problem to a missing fuse. Unfortunately, there are 3 empty fuse slots and no info on their rating or use. Where I can get the proper info. Truck was a salvage, no ops manuals, and sloppy work putting it together.
View 14 RepliesFord F-150 (2009-2014) :: 2012 STX - Where Is Fuse Panel Located
The owner's manual for my 2012 STX 4x4 is of no use. There is nothing in my truck that resembles the illustration.
View 11 RepliesCorolla / Matrix 2009-13 :: Interior Panel Fuse Removal / Broken
I attempted to remove a 7.5 amp fuse from the interior panel under the dash on the left side. Using the fuse removal tool in from the fuse block under the hood, I grabbed one and worked it out slowly.
When I got it out, the metal prongs were broken off of the plastic housing. I thought this was weird and looked into the fuse block trying to see if I can see the prongs. No luck!
I attempted to pull another fuse to see if it will come out and sure enough, the metal prongs are broken off in the fuse block. I tried again to see if I could see the the prongs but again, no luck!
I put the plastic housing (top half of the fuse) back into the slot and the electronics for that fuse is working. However, I am concerned that something is wrong and causing the fuses to break when attempting to pull them out.
Camry 2012+ :: Footwell Lighting - Can't Find Fuse Box Under Instrumental Panel
Im trying to put in footwell lighting ran all the wires and all but trying to make a connection cant seem to find a fuse box under the instrumental panel...! Where can i connect under panel..! Looking for pics....
View 9 Replies