Toyota - Camry :: Steering Wheel Makes Noise
My car makes a trouble sound when turning the wheel. It has been to the shop and new steering wheel fluids and a few other adjustments were done. I have a friend his daughters car just started making the same sound. My car has been doing this for months. We both have the same make and year car.
View 4 RepliesToyota - Camry :: Does Not Start But Makes A Machine Gun Like Noise Instead
This car has been sitting in my car porch for a little over two months. I would start it once every 1 or 2 weeks and let it run for a minute. I assume the battery was not at the best of it shape since every time I started the car, it would take a little more time, but the car would end up starting just fine. After a two weeks break, the power was down and nothing would turn on at all. I jump started the Camry with cables connected to my own car and thought I would start the Camry and take it for a ride, make sure the battery gets a chance to recharge.
But nothing happened when I turn the key, nothing but this "machine gun"-like noise ( which you can hear on the video [URL] .... don't know if by starting the car without driving it for two month, I did not give a chance to the car to recharge the battery, which led to the total loss of power, but this does not explain why when jump started, the engine won't turn on, and does not explain this sound I hear...
Toyota - Previa :: All Wheel Drive Makes A Howling Noise From Front End
1993 Previa, all wheel drive makes a howling noise from the front end, all speeds, in or out of gear. Bearings have been checked for looseness and seem OK. Might it be the front trans axle or whatever mechanism they use up there? 220,000 miles.
View 3 RepliesFord Super Duty (1999-2016) :: 2000 - Front Axle - Hub Makes A Slight Metallic Grinding Noise About 1/2 Way Around
I am in the process of replacing the front hub seals so my ESOF works again. I tested both front hubs with a mityvac and neither one of them holds any vacuum at all. All the lines are good, and the pump and solenoid seem to be working fine.
I have the driver's side apart and I have a couple of questions.
What's a good source for the vacuum seal? I've checked rockauto, riff raff, and diesel o-rings. Diesel o-rings has it, but the description says it's only for 2003+ Excursions so I didn't order it.
There is no yellow o-ring anywhere on the hub. I assume that someone forgot to put this o-ring back in and this is why I don't have ESOF? I guess what I really want to know is that there isn't some 2000-specific thing where there's no o-ring, right?
After I got the hub off, I spun it around on my workbench and it doesn't sound good at all. It makes a slight metallic grinding noise about 1/2 way around. I assume this isn't normal? AFAIK these are all original parts - but the missing o-ring means to me that someone already had it apart.
There was a lot of water intrusion and rusty colored grease but nothing was dry, the needle bearings were intact and the shaft isn't scored at all where the bearing rides. I'm hoping new seals and good cleaning and it should be good as new. And then it's off to the next side.
Toyota - Camry - Batteries :: 1996 - Won't Start Easily - Makes Noise When Trying To Start
I have a 1996 Toyota Camry with 200k miles on it. It has been giving me trouble starting for a while and I was advised to replace my battery during my last oil change. The problem is when I try to start it does not start for a while. It makes a noise and tiisssssss and stop. tissssss and stop. But then third or fourth try, it works. I installed a new battery and I am still having the same problem. One cold day, it never started no matter how many times I tried. My roommate who is an aerospace engineering PhD candidate came out of the apartment with a teapot full of how water and poured it onto the terminals. For record, terminals are clean. When he did that, it worked.
What is wrong with car?
Toyota - Camry :: 2000 - Loud Noise And Check Engine Light On
I have a 2000 Toyota Camry with about 136,000 miles on it. Recently because it was making a loud noise and because the check engine light was on we got the exhaust system changed at Coles and this made the car silent as before.The mechanic there checked the check engine light code and reset it and he said it was an Evap code.He checked the fuel cap and found it to be OK. He said that if it comes back again I have to get it checked by some one who has a smoke machine to detect the leak and this could cost me about $100/- to set it right.The check engine light has come back again.
View 4 RepliesToyota - Camry :: 2005 - Grinding Noise That Appears To Come From Left Front Side
My 2005 Camry started to make a, for a better work, "grinding" noise that appears to come from the left front side. It seems to appear around 40mph. Other symptoms:- the noise is not present when the car is in park even when revving up the engine- the noise appears to be correlated to the car/wheel speed - if placing the shift in neutral, the noise does not change while the speed doesn't change- if starting in 2nd gear, the noise only appears around 40mph when the engine is about 4500rpm.
Here it is a little hard to distinguish as the engine masks it- if switching the the 3rd gear, the noise does not change- if switching to "D", the noise does not change- coasting at neutral at more than 40mph still gives out the noise- when going over higher spots in the road (when the load of the wheels is reduced) the noise intensity goes down
There is no (or very low) noise at low speeds. Also, no noise when taking sharp turns. Had both front wheel bearings changed and the break pads, and the noise did not go away. I will be taking the car to a transmission place soon.
Toyota - Camry :: Front Pads Started Making Noise On Brake Application
05 Camry, 2.4L, 47K. Replaced the front brake pads two months ago. I put in Akebono pads and did nothing with the rotors as the original pads were not completely worn out and there is no vibration whatsoever in the pedal.
The pads have recently started making noise on brake application. I'm getting ready to take them back apart and re-lube everything. Should I take some sandpaper to the pads & rotors to knock off any glazing? Do I hit it with a course or fine grit? I have not had this problem happen in the past and was thinking that maybe it is the quality of the pads but I believe these are oem...
Toyota - Camry :: Heater Stopped Working - Blower Makes A Loud / High Frequency Sound
247,000 miles on '98 Toyota Camry as of last summer, car owed us nothing. Suddenly lost oil a month after regular oil change, ruined engine. Mechanic found used engine from totaled car (w/ approx 65,000 miles). Current problems:
1. speedometer/odometer not working,
2. heater/blower stopped working this week, blower makes a LOUD, HIGH FREQUENCY sound, sort of like a siren.
Was hoping to get another 2 years from her considering recent cash outlay. The mechanic couldn't figure out issue #1, and he hasn't looked at it since #2 started this week. I guess we can live w/ issue #1, but #2 has to be fixed ...
Toyota - Sienna :: 2006 - Makes Odd Squeaking Noise When Moving
For about a year now, my trusty Sienna has been making this intermittent little squeak. It's not loud (it's not the belt!). It seems to be coming from the passenger side, toward the rear. It only happens when I am moving. It seems to happen when I am running the AC. It is a soft little chirpy-ish squeak, about 2 seconds in duration. It sounds for all the world like a vent opening up with a squeak. Driveability is in no way compromised.
View 6 RepliesPrius (Gen 3) :: Toyota 2010 Makes Banging Noise And Vibrates Whole Car When Accelerate
I have recently noticed that when I accelerate my Toyota Prius 2010 it makes rattle noise and vibrates the whole car. The weird "bang" "bang" noise comes from the passenger side near the engine and when the noise comes my whole car shakes like crazy!
I went to my local car mechanic and he couldn't find anything wrong with it accept the EGR valve which I have now replaced. However, the problem still continues. When I shut down my car and then restart it its fine for some time and then the problem repeats!
It sounds like this .....
Passat (B5) :: 2000 - AC Compressor Makes Squealing Noise
All was fine with it until a month or so ago. Now, after the car is first turned on and the AC is turned on, it makes a terrible squealing sound. The moment the AC is turned off it stops. If the AC is left on, it will generally make the noise for a good 20 seconds, stop, and then repeat that a couple more times(and the noise will cease for as long as the car is on).
I popped the hood and took a look (I'm assuming the compressor is on the lower left), and when the AC is off it spins fine. However, when the AC is turned on, the fan starts up, then it visibly stops spinning and really struggles to spin, causing the noise. Do I need a new compressor?
Camry :: 2004 LE 4-Cyl Makes ZIP Noise After Starting
Just started happening today. 2004 Camry LE 4-cyl. About 180k on the clock. Not sure if started has ever been replaced.
RIght after I release the ignition from the "start" position, I hear a load grinding noise, sounds a lot like the noise a Zip Tie makes when being pulled. After a second or so, the noise ceases and the car runs normally.
I suspect the starter may not be disengaging quickly enough. If starter, do I need to replace it, or is there some component that can be replaced?
Passat (B5) :: 2000 - Engine Makes A Loud Noise After Running
Going to take a look at a 2000 v6 passat with 130k on it. They had the car serviced at Jiffy lube and now the engine makes a loud noise after running for a minute or so. The wrong oil was used. So I'm thinking the oil pump and screen are clogged up or the oil becomes to thin when warm therefore not providing proper lubrication.
View 5 Replies4Runner/GX470 :: 1990 Toyota V6 Makes Whirring Noise When Key Is Turned But Engine Does Not Crank At All
I have an 1990 Toyota 4Runner. V6 engine. Automatic. 4wd. Today it blew an upper radiator hose. A few seconds after the initial pop of the hose and the spew of fluids the vehicle died. I replaced the upper radiator hose and the lower hose- and refilled the antifreeze. There are no leaks as of right now.
The engine will not start. The belts spin whenever the key is turned on. But the engine will not crank. You can hear the starter trying to start it up. Jumping the vehicle was of no luck. Charging the battery was of no dice.
The vehicle makes a whirring noise (belts spinning) when key is turned, but the engine does not crank at all. The noise stops as soon as you shut the key off. The oil is clean and full still.
Toyota - Tacoma :: 2001 - Engine Makes Knocking / Ticking Noise In Cold Weather
I have a 2001 Toyota Tacoma that has a knock or ticking in cold weather. The problem starts sometimes immediately after I start and other times it is only when I press on the gas in the cold mornings after a few min warm up. The noise goes away after 10 min. The question I am wondering is this:
1: could it be worn piston rings and the pistons are slapping the cylinder wall
2: is it an oil pump problem or a oil restriction issue
3: is it a valve guide issue
4: with the history of the 2.7 having exhaust manifold issues (poor manufacturing) could a cracked manifold be the issue
I change the oil myself, the oil filters have been OEM toyota, the noise has been going on since 60,000 miles, the truck is at 230,000 miles.
Camry :: 1995 - Makes Grinding Noise While Accelerating
My car just started making a grinding noise when accelerating. It does not make it while maintaining a constant speed or revving the engine in neutral. I never had this problem before and I am at a loss to explain it. Car is 1995 Camry for what that is worth.
View 4 RepliesGolf V R32 :: Front Brake Pads Makes Clacking Noise
The front pads on the R shift from one side of the caliper to the other whenever I move from forward to reverse they make a loud "clack". I thought it might be an O.E. pad issue, but I've changed the pads out to EBC's, but still no bueno. The new pads fit snuggly into the calipers and seemed to have solved the problem at first, but about 5k km's in, they're making the same noise.
I have anti-rattle springs installed, but they're not working. Is there supposed to be a pair of shims between the caliper sliders and the pads grooves that the previous owner removed for some reason? I don't think so, because that car only had 25k km on it when I purchased it; but you never know.
Golf/GTI VII :: Front Suspension Makes Cranking Noise Randomly
I notice it mainly when leaving my house. Might I add I live on a dirt road that this car is not made for, so I often go about 5mph until I hit the pavement. When I back out of my driveway and cut the wheel rather sharp, there is a creaking noise from the front end. When I hit the end of my dirt road there's a hump in the transition from dirt to asphalt that's not quite big enough to bottom out but I'm sure it stretches out the suspension. I also here some creaking noises sometimes when I'm turning into the road.
Other than that, I can't say I've noticed any noise while driving on crappy PA roads. Now call me silly for this, but I've never checked for the strut pucks as I have no belief that they are still there. Just based on from what I have read, my car doesn't feel like I'm bottoming out over every little bump, so I don't believe that is the issue either.