Prius C :: How To Patch A Hole In Undercover On Driver Side

So wifey ran over a metal something... It bent the front left rim (fixed already) and it also made a hole in the undercover and the now there's this buldge on the driver side floor board. Been trying to find a way to patch it up and is it smart to just hammer the buldge back down?

View 3 Replies

Prius (2010-12) :: Driver Side Tire Looks Almost Flat But Tire Pressure Light Not On

My car's driver's side tire looks almost flat as one of my co-workers indicated first but the tire pressure light is NOT on. Should I worry about it and get it checked out?

View 19 Replies

Lexus RX 2010-15 :: Difference Between Hitches And One Hole / Two Hole?

I've looked at [URL] at the three primary hitch receivers for the 2013 RX 350; Curt, Hidden, Draw-tite.

From the side profile picture which etrailer displays for each, the Curt has one hole and the other two have two. Those two appear to be different sizes. The one on the Curt seems to appear smaller than the larger of the other two holes on the other two hitch receivers.

I called etrailer and the person I spoke with could not tell me why they were different, they just read the specs I see on the page, tongue weight, load, blah, blah.

With my hitch, I will need to haul a Yakima trailer, about 450 Ibs total, it is a very lightweight trailer, or a 2" Yakima bike rack. Maybe some day, I'll need to haul something of substance, but I have no plans.

I'm also wondering if a hitch which is recessed back, will it be difficult to work the pin in and out?

View 11 Replies

Passat (B6) :: Hole In Driver Side Glove Box

Before i bought this car i thought a vw nut owned the car but now i'm certain. when i lowered it the other weekend i learned some things.

-k&w shocks in the rear
-frame notch up front with brackets welded inside the wheel arch to hang air lines
-a nice little hole in my driver side glove box where the height controller was probably mounted

View 15 Replies

Prius C :: Rattle Sound Only In Front Driver Side Tire

My c4 when new made a rattle noise only in the front drivers side tire . Can be heard while the window is down and while hitting bumps on the road or the lane dividers reflectors. botts dots i believe.

View 19 Replies

Prius (2004-09) :: 2007 - Noise From Tire On Driver Side Of Car

Hear a plop plop noise when car travels forward over 7 MPH. The sound increases as speed increase. The tire isn't flat and I haven't found any debris in the tread or in the wheel. I need to know if it is safe to drive this car to the dealer (about 7 miles) to have them check the car.

View 5 Replies

Ford F-150 - 1997-2003 :: Hole In Driver Side Header

So I have a 97 f150 with a 4.2. the driver side header has a hole in it. Any tip or trick on pulling that bad boy off without busting the studs? ow ya she has 352k on her, I am guessing those nuts wont want to move...

View 7 Replies

Santa FE SM (2001-06) :: Leaking Antifreeze - Hole On Cylinder 5 Side Of The Block

We now have a new problem. Motor is leaking antifreeze out of what i will call a weeping hole in the on the #5 cylinder side of the block. The hole, which is manufactured in the block. Is where the antifreeze is seeping from. The hole is located above the bottom bolt an just below the top bolt for the transmission. the hole is on the block. I think that there might be a freeze out plug on the back of the motor block where the leak is coming from. The block was not leaking before we removed the heads for valve job.

View 3 Replies

Ford 7.3L Power Stroke (1999-2003) :: Broken Glow Plug Outer Wall

Well I just "did" the glow plugs on my recently acquired 99 7.3 and while 7 came out with no problem, one of them gave me more resistance when turning than expected and then "snap". Now here is the interesting part. What actually came out is the threaded top portion of the outer wall, while the rest of the outer wall and the electrode are still in the block. I have done a lot of searching and it seems that usually the electrode detaches from the outer casing and the entire outer casing comes out with only the electrode or part of the electrode stuck in the shaft (usually due to carbon buildup or swollen tip). In this case though, the outer wall of the plug sheared in two, which seems to imply that the outer wall itself is what is stuck in the shaft and not the electrode. The attached picture hopefully explains what I am trying to say.

I can easily latch on to the end of the electrode with some vice grips, but even if I managed to get that out, I would still have the outer wall of the plug in the hole. At the moment I just screwed the threaded part back in to keep the everything from blowing out so I could crank the truck. It cranked right up and seems to run fine. My inclination is to just leave it as is and hope that 7 good glow plugs will do the job, as I have some nightmares about making things worse in trying to make them better. Any chance of the electrode falling into the cylinder if this much of the outer case is still there? How to remove stuck electrodes, etc. but none on a stuck outer casing?

View 9 Replies

Prius (Gen 2) :: Hole On Top Of The Dash

I noticed a rectangular hole of approximately 2"x 8" on top of the dash, near the windshield on driver's side in line with the steering wheel. Our garage is dark in the mornings, and when my wife turned on the car ('06 model), there was a faint green glow coming from this opening.

It is hard to see otherwise since it is obscured by the windshield.

View 2 Replies

Prius (Gen 3) :: Dreaded Low Oil Pressure - Hole In The Oil Pan

I had an incident with my car in which a truck ahead of me dropped some metal object and I couldn't swerve to avoid it. But, straddled it the best I could to avoid tire damage.

I made it about 50 miles before I got the dreaded low oil pressure light meaning one thing, a hole in the oil pan.

View 18 Replies

Ford Super Duty (1999-2016) :: Dropped Wrench Inside The Hole While Changing Solenoid On Driver Side?

I was changing the vct solenoid on the driver side and I dropped a 3-4" Allen wrench inside the hole. I tool the valve cover off and can't see much down inside. Its not to the right by the cams, I think it fell down in front by the timing chains but I can't see it caught on a chain or anywhere. I drained the oil and took the filter off and looked in the oil pan with a snake camera, no luck.

View 4 Replies

Ford Super Duty (1999-2016) :: Road Noise And Dust Coming In Through Two Vents On Back Wall

I just picked up a 05' F450 Super-Duty it had the rear seat removed and the rear wall, under the window is bare metal. I have all kinds of road noise and dust coming in through the two vents on the back wall. How to fix this?

View 6 Replies

Ford Super Duty (1999-2016) :: Prevent Metal Shavings From Getting Stuck Between Piston And Cylinder Wall?

I bored and tapped one of the spark plug holes in my Triton engine. And I used a long aluminum rod attachment for my air compressor to blow out the metal bits from inside the cylinder. I started with a full tank of air, and used it all up to try and get everything out that I could. But with my bore-scope I could see a lot left over along the edges of the piston. So two more times I filled up, and emptied the air tank (15 gallons, 150psi). Some more of the chips came out, but after the second time there were still some chips there, and the third time didn't work much.

My bore-scope doesn't have the best resolution, but I think there are a few chips that are stuck between the piston and the cylinder wall. Since there were only a few, and they are aluminum, I decided to do what I saw another youtuber do. I just started the engine for a few moments without the spark plug, so I might blow out any remaining chips (although he did it without first using compressed air at all.)

That was the first cylinder I bored, tapped, and installed an insert into. But for the other cylinders, I would like to avoid any metal bits left in the cylinder. But I can't think of any way to prevent some from wedging themselves between the piston and wall (if that's what is happening).

View 12 Replies

Prius V Fuel :: TMPS Shows Pressure In Each Tire Or Just Give Warning When One Of Tire Is Low

Does the prius v TMPS shows you the pressure in each tire or just give you a warning when one of the tire is low. How many MPG do we gain if we over inflate the tire to the max possible.

View 16 Replies

Prius (2010-12) :: Noise From Suspension When Go Over A Bump Or Hole

Since I got my Prius V, i have this noise form the suspension... when i go over a bump, or a hole... It sounds like the exhaust is hitting on something. It could be the brakes too. It does not sound like something is broken, but more like a tin sound hitting on something...

If windows are closed the ride is smooth, but when I open i keep hearing this sounds, and its driving me crazy... Is that normal for Prius V because of the different tiers?

My Accord does not have any similar sounds driving on the same road every day... actually ride with Accord is way better... Is that normal, should I go back to dealer? Car is 3000 miles only...

View 6 Replies

Prius C :: Tire Pressure Light On - Cold Temperature Causes Tire To Deflate?

Do cold weathers cause tires to deflate? On my way to school today I noticed the tire pressure light. I've had the car only for 3-4 weeks. Never had any issues with it.

View 19 Replies

Lexus GS 2013+ :: Car Is Chewing Inner Side Of Passenger Side Tire

Just noticed today that the car is chewing the inner side of the passenger tire. The remaining 3 corners do not have this problem. The car is lowered.

I think I have maybe -1.2 camber in front, not more than that. I don't know if its the toe that needs to be adjusted or something else is causing this? Just seems weird that only 1 tire is having the problem.....

View 14 Replies

Prius (Gen 2) :: 2009 Toyota Lost Power After Hitting Tiny Hole

I figure out it is because of my coolant pump; however, I hit a huge pothole about a month ago during the morning time, and the entire car lost power. I was assuming it just rattled something, but then the other day after I was driving for about 2 hours, I hit a tiny hole and the car lost power.

However, when the car lost power, it started making this weird rubbing noise as if the timing belt had went off track or something. I'm not sure if that's even possible, but I pulled over, turned the car off, and turned the car back on. Everything was fine after that and I continued to drive for a few more hours.

I do not think the transaxle fluid was ever changed at the 60k interval and I just hit 100k two nights ago. I decided I'm not going to Uber anymore until I get this all taken care of. I need this car to last as long as possible, and I am definitely worried about the ATF or whatever because it's 40k past when it's supposed to be changed.

View 19 Replies