Prius V :: 2014 - Windshield Washer Nozzle Freezing If Temp Is +20F Or Less
The windshield washers of 2014 Prius v (lowercase v for the Prius v) didn't work all winter if the temp was +20F or less. I'm using -30F or -40F washer fluid. I use the same fluid in my 1995 Previa, and its washers worked all winter. A friend has a 2014 Prius, which didn't have any washer problems.
I tried pouring warm water over the nozzles, but they're location makes it difficult to reach them. Is it the nozzles or is it the rubber hose that feeds them from the reservoir?
Phaeton :: Windshield Washer Nozzle Replacement
How to replace the windshield washer nozzle? If it makes a difference it's the driver side one. It's clogged and I'd like to try and soak it in some stuff to dissolve the clog and/or replace it myself. The dealer was going to charge me ~$150 to do this and trying to see if I can do it myself.
View 5 RepliesPrius (Gen 3) :: Can't Keep Film Off Of The Inside Of Windshield
When I first got my car I had an issue trying to keep the film off of the inside of the windshield. Even with Windex it would leave streaks. I found out that old newspaper worked best.
A couple of weekends ago I noticed that the dash part closest to the windshield looked like it was beginning to discolor ever so slightly. I grabbed a bottle of the Armor All interior spray, wet a rag and applied a thin film to this part of the dash and then the rest of the dash.
After the first day of sitting in the hot sun in an asphalt parking lot at work I again have a film on the windshield.
Camry :: 2009 SE - Windshield Washer Nozzle Is Not Spraying Just Flowing Out
I have an 09 Camry SE. My right windshield spray nozzle is not spraying, it's just flowing out. I ran a small wire down it and nothing changed. I called 2 dealers and looked up the part and there are 5 different angles listed the dealers said I had to remove it so they could match the angle for the pitch of the windshield. Seems ridiculous that they would not know,but the parts breakdown lists all 5.
View 4 RepliesElantra MD (2010-15) :: 2012 GLS - Windshield Washer Nozzle Adjustment
2012 Elantra GLS ... The windshield washer spray pattern is too low. The nozzles on the Elantra appear to be entirely plastic unlike the conventional ball which I can poke a needle in to adjust it. I ran the hand under the cowl cover and could not feel any kind of adjustment mechanism. How to adjust the nozzles to aim higher.
View 27 RepliesFord Excursion :: Windshield Washer Nozzle Stop Working?
Windshield washer nozzle stop working? Is there an easy way to unclog it or does it need to be replaced?
View 3 RepliesPrius (2004-09) :: Windshield Will Fog Up On The Inside With Defroster On
i have noticed that with my 08 that occasionally when driving after a rain the windshield will fog up on the inside with the defroster on and set at roughly 73 deg. I also notice that under a/c auto occasionally the window will fog up a little right around the vents, just under normal driving.
View 2 RepliesPrius C :: Frost On Inside Of Windshield - How To Resolve It
I started my car this morning, and there was a lot of frost on the inside of the windshield. This had to be the result of humid air in contact with the cold windshield, and as the air is dry, the only source of humid air is from my breath. So, when I drive, I fill the interior of my car with warm, humid air, which freezes to the windshield.
I've decided that when I get home, I'll roll the windows down and let the fan blow for a few minutes to replace the warm humid air be replaced by cold air. If I am right, it would reduce frost on the inside of my windshield. It can't hurt, I guess.
Prius (2010-12) :: Front Windshield Wipers Removal / Replacement
I have a 2012 Prius. How do I remove the front windshield wipers so that I can replace them?
View 2 RepliesPrius (Gen 3) :: Removing Sticker RFID Tag On The Inside Of Windshield
I just took delivery of my Prius a few days ago, and I noticed a rectangular sticker on the inside of the windshield when I got home It is black (from the inside), and it is located in the top - left corner (when viewed from inside) It looks like it may be an RFID tag possibly something from the port to track vehicles as they are coming in?
View 5 RepliesFord Super Duty (1999-2016) :: How To Remove Windshield Washer Nozzle
2011 F250 with hood mounted windshield washer nozzle. How do I remove the nozzle? In a campground with basic tools.
View 6 RepliesFord Super Duty (1999-2016) :: Changing Instrument Cluster - Removal And Installation Of Needle?
I will change the cluster lights to blue LEDs.
Some "leftover" questions:
How do I get the needles "clear" instead of red?
How to remove and reinstall the needles the "right way" (e.g. calibration)
Everything else I could find here in different posts.
Venture :: 2001 - Broken Glove Box Hinge Removal?
How to remove broken glove box hinge 2001 Ghevy Venture van?
View 3 RepliesSanta Fe (CM - 2007-12) :: Broken Plug Inside Radiator
It happened while I was putting back the radiator drain plug. The head of the drain plug broke. I used the easy out tool to extract the screw. I managed to make a hole in the screw but was not able to pull it out. The drain plug got spread on the radiator thread instead. I tried to pull it with a thin screwdriver. I managed to broke half of it and take the small pieces out. Unfortunately, when it was almost out, it jumped up inside the radiator...
I have unsuccessfully tried a vacuum to suck it out. What are my option at this point? Could I just leave it there or I must take it out somehow?
Corolla / Matrix 2009-13 :: Interior Panel Fuse Removal / Broken
I attempted to remove a 7.5 amp fuse from the interior panel under the dash on the left side. Using the fuse removal tool in from the fuse block under the hood, I grabbed one and worked it out slowly.
When I got it out, the metal prongs were broken off of the plastic housing. I thought this was weird and looked into the fuse block trying to see if I can see the prongs. No luck!
I attempted to pull another fuse to see if it will come out and sure enough, the metal prongs are broken off in the fuse block. I tried again to see if I could see the the prongs but again, no luck!
I put the plastic housing (top half of the fuse) back into the slot and the electronics for that fuse is working. However, I am concerned that something is wrong and causing the fuses to break when attempting to pull them out.
Ford F-150 - 1997-2003 :: Broken Exhaust Manifold Bolt Removal
I have a 1999 ford f150 4.6 engine and it has an exhaust leak but wondering what is the procedure to remove a broken bolt and the rest of the bolts on the manifold
View 2 RepliesTouareg :: Condensation On Inside Of Windshield?
I've noticed that often in the morning, my Touareg has condensation forming on the inside of the front winshield. I don't drive the vehicle daily. I have looked for a moisture source inside of the vehicle but it is bone dry.
View 3 RepliesGolf/GTI VI :: Condensation On Inside Of Windshield
As stated in the title I'm having condensation on the inside of the windshield, but I only notice it when I get off work and go out to start my car (I work second shift and get off at 11:30pm) but when i go out in the morning or afternoon I don't notice any. I pretty much roll everywhere with my windows up so I'm not getting rain in it other than when i open the doors to get in and out.
View 6 RepliesKia - Rondo :: Frosting On Inside Of Windshield?
I've noticed on a few recent cold mornings that there is frost on the INSIDE of my windshield as well as on the outside. I've had this car a couple of years, and this has never happened before with it.. or for that matter with any other car I've ever had. Why is this happening, and what can I do to prevent it from happening again? And if it does, how best do I get the frost off the inside of the windshield? The scraper doesn't work on the slight curvature.
View 14 Replies