Passat (B5) :: Engine Knock Noise When Engine Fully Warmed Up And In Drive Or Reverse
OK--2001.5 1.8t Tip, 85k, nothing but Mobil1 since day one religiously. At around 81k miles the t/belt tensioner seized & let the belt jump and bend a few valves. Had VW do the repair under the p.t. warranty. Engine now runs very well again except there is a knock noise that sounds an awful lot like a crank or rod bearing. The noise is worse with the engine fully warmed up and in drive or reverse. Took it back to VW, they said it's a bearing in the a/c compressor. Sounded like B.S. to me, since the noise is no different with or without the a/c on. I picked up the car & removed the a/c belt at home & found the noise was exactly the same. I've about had it with VW on this issue. Been back 3 times with the noise complaint, & the noise is getting worse!!
View 1 RepliesPassat (B6) :: Slight Vibration In Drive Or Reverse But Not In Neutral
I am experiencing a slight vibration with in drive or reverse but not when it is in neutral. I change the spark plugs and checked the PCV. I have the latest model already and I replace the gasket in the PVC. There is no errors in VAGCOM.. What could be causing that? Mounts???
View 4 RepliesPassat (B7) :: 2012 SE Jumps When Shifting To Drive Or Reverse
I have a 2012 Passat SE (5cyl) automatic with 25k miles on it. I have noticed that when i put my car into gear (reverse or drive) that my car jumps with a little burst of speed (while I am easing off the brake), I don't have the slightest clue of what it could be, or if that's normal or not as i purchased the car less than 3 weeks ago.
View 3 RepliesPassat (B6) :: Pump Running Sound When Going Into Reverse Or Drive
2008 Passat Komfort... Pump sound for about 5 sec. When going into reverse or drive.
View 5 RepliesPassat (B5) :: 1999 Won't Shift Properly / Only Go Into Drive And Reverse
I have a 99 passat w auto and tip it will only go into drive and reverse, the tip does nothing and it starts in 4th gear from a start. It works in reverse but I can move the shift lever into 1st or any other gear and it does nothing it wont down shift or the tip wont do anything I am at a loss, I heard it could be the TCM or a pressure selonoid in the tranny...
View 2 RepliesPassat (B5) :: Vibration When In Drive Or Reverse And Stopped With Brake Applied
As outlined in this thread: [URL] .....
I had a recent misfire issue. Unfortunately the dealer has been unable to find the source. Since the original misfire I can feel the car vibrating when I am in drive or reverse and am stopped with the brake applied (ex - waiting at a stop light). It goes away when I drive and when I am in neutral. I realize there is SOME vibration noticeable in gear, possibly because of the way the engine is mounted. However, this seems different.
The tach stays at 750 rpm in idle (it may fluctuate a TINY bit but never goes over 800 at idle) as always. The vibration feels much like a vibration one would feel if a cell phone or pager were left on vibrate. This doesn't seem to be a rough idle where the car is "jittery" or "jerks", and, as mentioned, the rpm doesn't change.
I would think a bad coilpack or plug (plugs changed at 40K, Im now at 45k) would cause a misfire, and a CEL. I've looked into a throttle body cleaning and will do this, but I would think that would cause a rough idle as well. My understanding is that a MAF problem would be similar.
The only thing I can think of is a motor or tranny mount issue, but the car only has 45k miles and this problem was non existent until the misfire. Im almost certain it isn't related to having the car lowered recently.
Passat (B6) :: Transmission Having Delayed Engagement When Shifting Into Reverse And Drive
I bought my '07 Passat 2.0T Wagon as a CPOVW 6 weeks ago. It had 4700 miles on it. I complained about the transmission having a delayed engagement when shifting into reverse and drive. (it drives normally however with positive shifts and is very enjoyable) I was told it was normal and not to worry. (could it be designed-in to soften the engagement?).
This week I noticed a light "thunk" in the right front when re-applying power while coasting below 40 MPH. I never noticed it before but I usually strive for smooth driving so that may be why. I've had other Aisin Warners but they were in Volvos. I got out of a '99 Volvo Cross Country because I didn't trust the driveline. Am I going down the same road?
Toyota - Avalon :: Rough Noise In Both Drive And Reverse
Here's what happens to my car: If its in park you can floor the throttle and its smooth and quiet for the most part. Same with reverse. I can put it in reverse, back up hard and it's smooth. When i put it in drive, stationary, it sounds rough. When I'm taking off from a stop it sounds rough until I'm at a good cruising speed at which point it seems smooth, until stopped again … … The noise is rough in both drive and reverse. Note: this stops for about a day after hoisting the rear end. Also, when going down the highway, the throttle "pauses " for a moment, then resumes speed about every 5 minutes ...
View 1 RepliesCamry :: 2002 - Grinding Noise And It Won't Move In Reverse Or Drive
I replaced the front hubs and bearings on my brothers 2002 Camry today. He drove less than a block and developed awful grinding noise and it won't move in reverse or drive. It rolls when I put it in park. I had to pull it back into my shop. Is it possible the inner CV came loose and i didn't realize it? It all seemed to go back together fine. The new CV axle nuts were quite tight and slow to put on with my impact gun.
What else could possible go kaput when I re & re hub/bearings? And what a long ugly job to replace those bearings. Don't even think about doing this without a good hydraulic press. Up to the point of getting knuckle off, it was easy job.
Golf/GTI VI :: Suspension Noise When Backing Out Of Garage And Down The Drive Way In Reverse
I have what sounds like a spring noise or a slight rub of a newly installed coilover set. The thing is it only happens when backing out of the garage and down the drive way in reverse, I'm not able to recreate it when moving forward. I've notice that it happens on all four. It is a very subtle sound/feel but it is there. I have about a one inch drop when backing out this when it occurs and yesterday I noticed it also happens when I go over the small lines that divide the driveway concrete slabs, but only when in reverse. Besides this the car rides and feels great with no other problems.
View 2 RepliesChevrolet - Tahoe :: Clanking Noise When Shift Into Drive Or Reverse
My 99 Tahoe has started making a weird like clank noise when I shift into drive or reverse. It also has a light shake which was only if I took a sharp turn, but is becoming a little more common.
View 10 RepliesSanta FE SM (2001-06) :: Grumbling Noise When First Started And Put Into Drive Or Reverse
My 2003 Santa Fe makes a grumbling noise when first started, and put into drive or reverse. The noise seems to be coming from the passenger side of the engine compartment. The noise disappears when the drive train has warmed up.
View 4 RepliesSonata I45 (YF - 2011+) :: Suspension Noise When Changing From Drive To Reverse
While trying to troubleshoot a suspension noise (knock on potholes and when changing from drive to reverse) I found my outer tie rod end to have alot of play. This is similar on both passenger and driver sides.
Is this normal? I couldn't see any other issues with the other components including the bushings.
Tie rod end noise - YouTube
Azera TG (2006-11) :: Click Noise When Putting Car In Drive Or Reverse
I have a 2006 Hyundai Azera Limited, 3.8 with 5 speed automatic; car has 139K miles. I am noticing a small 'click' noise when putting the transmission in Drive or Reverse, and sometimes when accelerating from a dead stop. Car otherwise drives beautifully - the 'click' doesn't seem to affect driving it. The CV's don't make a clatter if accelerating at full wheel lock, which is usually the tell-tale for bad CV's. Is this something simple? My thoughts are:
1.) Somehow it's a CV joint. Grayson Hyundai said they're 'shot' but I think I would notice more than a brief click? They said a whole bunch of other things were wrong on their 'inspection', said the brakes were 'shot' because the rotors had rust on them... I don't trust that opinion.
2.) A motor mount or transmission mount. Seems more likely since would be most noticeable with torque.
3.) Something in the suspension. The car has new tie rod ends, but there may be something else worn/loose that I'm not aware of.
4.) Maybe I am just being too picky. The car drives awesome!
Maybe I'm overreacting, I just don't want some sort of catastrophic failure to occur.. The car still feels very robust, solid, and overall quite healthy..
Santa FE SM (2001-06) :: 2004 - Clunking Noise In Drive Or Reverse
2004 Santa Fe, clunking noise in drive or reverse. checked brakes and cv joints, replaced drivers front and still making the noise. Transfer case was a little low on fluid but not much. Put up on stands and turn wheels with no noise. Put in drive or reverse while in the air and rear wheels sit still. It is a 4wd so I would think that all 4 tires would be turning. While in the air the front both turn and no noise is made.
View 18 RepliesToyota - Corolla :: Rattling Noise Audible In Drive And Reverse?
My '99 Toyota Corolla with 145K miles is making this rattling noise. It is audible in drive and reverse, but not in neutral or park. At first I thought coming from the dashboard area, like under the hood. However, I tried listening under the hood and couldn't really hear it over the engine noise. Finally I realized it actually seems to be coming from under the dashboard on the driver's side, right above the pedals. I made a recording holding the microphone down there. Here is a link to the audio file: [URL] .....
View 3 RepliesLexus RX 2010-15 :: Squeaking Noise From Stick When Shift From Drive To Reverse
I have a 2010 RX and I've recently noticed every time I shift from Drive to Reverse and vice versa there's a squeaking noise coming from the shift stick. What this could be and if there's an easy solution?
I'm not due for service or an oil change for another 5,000 miles so I'm hoping it's not something I need to address immediately. Do you think it would be safe to wait until then?
Elantra MD (2010-15) :: 2012 GLS - Loud Clicking Noise When Going From Reverse To Drive
I just started hearing a loud click when I change from park to reverse and from reverse to drive. If I keep moving the knob between those three spots with my foot on the brake and hand brake off, I hear a loud click at each spot. Hard to describe... anyway, this only happens when I first start the car, by the time I get to work if I try doing that when I park there is no loud click sound. The thing is, I don't know if this was always happening and I just noticed it now, or if it just started.
View 14 RepliesLexus RX 2010-15 :: 2013 - Loud Noise While Shifting From Reverse To Drive
I recently leased a 2013 RX 350 and started hearing a weird loud noise almost in the first week itself. It seems to happen whenever I shift the gears from Reverse to Drive. The loud noise comes from the back of the car and anyone sitting in the car (speakers turned off) can hear/feel it. It seems to be worse in the morning (or when the engine is cold).
I took it to the lexus service center and the person told me something about differential pressure, which I really didn't understand:-). However, he said nothing can be done and its not a safety issue and sent me back home without any fix. I have driven many cars in my life so far and never ever came across something like this. Is it something normal at all?