Gmc :: 2003 - Brake Lights Do Not Work / Battery Meter Flucuates When A/C Is Turned On
2003 GMC - SIERRA 1500 / 5.3 L / 4X4 / Z71 Package
Installed NEW BATTERY and Alternator. The truck has fluctuating idle and battery meter when A/C turns on OR you lower all windows at one time.
Tail Lights work but Brake Lights DO NOT. Dual A/C = Left side only throws cold on COLD and room temp at HOT. / Left Side - Fluctuates on all temps goes back and forth with no movement mostly HOT or Warm even on COLD ?
ALL FUSES WORK ... NO FUSES BLOWN
A/C , Truck Idle, and Battery Meter went BAD after I had my Oil Pan Gasket replaced having to Lift Motor due to the truck being 4X4 and mechanic let the battery die for a couple days due to him leaving inside lights on.....
Brake lights have been bad BEFORE ALL THIS HAPPENED....
Ford F-150 - 1997-2003 :: No Brake Lights But Turn Signals Work
This has been driving nuts for 2 days.... Brake lights dont work. Either pushing pedal or turning on lights. Turn signals work just fine.
Cab/cargo/3rd brake light on back of cab doesn't work either. I have checked/done the following:
- Checked Brake pedal switch for continuity. Tested fine.
- put multi meter on wiring all the way back to brake lights. No drop in voltage.
- changed bulbs. #3157 dual filament.
- positioned steering wheel all the way up and all the way down as suggested on here. No change.
- checked multi function switch (turn signal switch) for wiring issues. None found.
- kicked rear quarter panel for caveman adjustment out of frustration. No change.
What am I missing?
Passat (B5) :: 2003 GLX Brake Lights Not Working
I have replaced the brake light switch two times - still nothing going on with the brake lights. The turn signals and taillights work fine (replaced all the bulbs anyway). For what it's worth, what made me start this repair was that the third light was coming on, but not the brake lights.
That is when I went to the dealer and bought a new brake light switch. After installing that, the third light didn't work...so, I downgraded what I had to begin with, it seems. Thought maybe I had done something to break it when I installed it, which is why I bought another one. As far as I'm concerned, I followed the installation instructions meticulously, yet still nothing.
I have also pulled all the fuses in the access panel by driver's door and inspected them.
Elantra XD (2001-06) :: Brake Lights Out But Tail Lights And Turn Signals Work
I found out last night that all 3 of my brake lights are out. However, my tail lights work, and my turn-signals work. So obviously its not a big wiring deal. I was looking for the brake switch but i don't know where its at because i looked underneath. What fuse is the brake lights cause my manual doesn't have it listed. I drive a 04 Elantra GLS.
View 6 RepliesFord Ranger / B-Series :: 1996 - Brake Lights Will Not Work But All Other Lights Do
My brake lights will not work but all other lights do, bulbs and fuse have been replaced.
View 2 RepliesPassat (B5) :: 2003 - Tail / Brake Lights Stay On
I have a 03 Passat with the 1.8T motor. I'm having a problem where the tail lights / brake lights will not turn off. Which fuse to remove so that I can save my battery.
View 4 RepliesPassat (B5) :: 2003 - Brake Lights Not Turning On Anymore
I have an 03 passat B5.5 and my driver brake lights went bad, so I replaced them, now none of my brake lights work, I checked all my fuses and none of them seemed blown, what could be the problem? the center brake light doesn't turn on either.
View 7 RepliesC/K :: 1998 - Brake Lights Do Not Work
I have a 98 K1500. The brake lights do not work. The left and right tail lights work as well as the left and right turn signals. The third brake light on the cab also works.
View 5 RepliesCamry :: Rear Brake Lights Don't Work
Both rear brack lights don't work. It's not the bulb because when I press the alarm both of those bulbs lights up. The middle brake light in the back window works works. What can be the issue? I already check the fuse box but all was good ...
View 5 RepliesTouareg :: Brake Lights On The Trailer Do Not Work When Towing
When towing the brake lights on the trailer do not work? I trouble shooted it back to the Toureg? Factory Hitch and Light plug. 2006 Toureg V8.
View 5 RepliesVolkswagen - Cabrio :: 1997 - Brake Lights Do Not Work
Brake lights do not work on my 1997 vw cabrio fuse lights and break switch are good.....
View 13 RepliesJeep - Cherokee :: Brake Lights Blinkers Don't Work
2000 jeep cherokee brake lights will not work.changed the bulbs, brake switch, checked fuses, ripped the effin panels out and checked wires and grounds, ripped up rugs found the mouse nest-no mouse, no chews in wires. the parking lights work, hazard lights work? WHEN LIGHTS ARE ON, RT HAND BLINKER DOESN'T WORK...WHEN LIGHTS ARE OFF BOTH BLINKERS WORK..
View 1 RepliesCamry :: 2007 LE Back Lights Only Work When Press On The Brake
My 2007 camry LE has some led lights on the front and rear turn signals with license plate lights etc... At night my back lights dont work but when i press on the brake, they work...
View 14 RepliesSanta FE SM (2001-06) :: Back Right And Left Brake Lights Don't Work
For some reason my back brake lights on my 2006 santa fe are all goofy. The two in the rear window work fine. The turn signals work fine but the right and left brake lights don't work. I replaced the10 am fuses and the lamps. It did not work at all. I don't understand how the top lights would work but the right / left wont. I even tried the flashers and the brake lights are not on either. I don't see a fuse in the box in the engine compartment labeled for rear brakes, so I am at a loss.
View 9 RepliesAccent MC (2006-11) :: Brake Lights Does Not Work When Pedal Pressed
Noticed when I press brake pedal brake lights does not work even the center one. Checked all fused in the car and the small ones under the hood. All fine. I have a long trip tomorrow. Where else i can look. Everything seems working. Reverse light is fine. Is that related to latest brake light switch recall? Cant think of anything else.
View 4 RepliesFord F-150 (2004-2008) :: Brake And Turn Lights Won't Work
The brake and turn signal lights on my 04 f150 quit working. I've replaced all of the fuses and relays I could find from the owners manual. The windows have also quite working. What may be wrong?
View 9 RepliesSilverado :: 1998 - Brake Lights And Rear Turn Signals Will Not Work
I've got a 98 Silverado. Break lights and rear turn signals won't work but tail lights and reverse lights work. Also the brake light on the cab does work.
View 6 RepliesSanta FE SM (2001-06) :: 2005 - Turn Signals And The Brake Lights Don't Work
So I lent my santa fe to a buddy to do some hauling, I got it back yesterday and the turn signals and the brake lights don't work...notta. Regular running lights are working without issue, but no turn signals, no hazards, no brakes. Even the "tick, tick, tick" of the turn signal is gone, it's just dead.
View 1 RepliesNisan - Sentra :: 2010 - Brake Lights Out - ABS On - Cruise Control Won't Work?
We started having problems first with the car dying at stops, and having to be restarted. We had the oxygen sensor cleaned, and it stopped that problem. Then my ABS lights came on, and my cruise control stopped working. When the car was cold and I tried to take off (forward or reverse) the rpms would not go above 1000, and the car would only move like it was idling. I read in a closed discussion on this forum that it was the stop light switch under the brake pedals so we got one and changed it out. Same problems.
So we thought we had a bad one, so we exchanged it, and the tech at the Auto Parts store said "Maybe you have a fuse out." We changed the stop light switch again, same problem. We found a blown fuse marked "stop light." It is a $2.70 fuse, 10 amps. We put it in, and the brake lights worked. I planned to put it in the shop the next day, having read that it could be the air inlet sensor, the throttle body needing cleaning, the transmission, the transmission fluid....anyway, I had to go to the store this morning, and the ABS light was out, the cruise control was working, and the car no longer ran in "limp mode."
Before you do anything else, change the fuse!