Nissan - Altima :: 1997 - Spark Plugs Keeps Burning Out
1997 Nissan altima se 5 speed... I changed valve cover gasket after the spark plugs where filled with oil Put to much silicon on gasket then fixed the problem it doesn't leak any more. But the car keeps burning out spark plugs it will start right up with new plugs but after running for about 5 minutes they burn out turn black.
View 4 RepliesNissan - Altima :: 2000 GLE Idling Rough - Motor Gone Because Of Oily Spark Plugs?
Nissan altima gle (2000) and for the past 3 weeks it has not gone over 55. The car was running ok before but was idling rough. A mechanic replaced the intake manifold gasket, the MAF sensor and the fan sensor. I decided to change my spark plugs when I noticed the idling was getting worse. The spark plugs had oil on them and now a month after the new ones are burned (like ashy tip, black thread) and dripping oil again. I think is the oil not letting my car accelerate in the highway. I considered changing the valve gasket, cables and cap for the spark plug. A mechanic told me not to bother because the motor is a lost. Is he right?
View 16 RepliesNissan Altima :: 2005 Missing When Come Back On The Gas While Driving
I have a 2005 Nissan Altima 2.5L 4 cylinder. About a month ago I had check engine light come on and required to replaced the catalytic converter. I replaced it myself with one from Autozone. Now 2 weeks after replacing it; every now and then I'll be driving let off the gas and when I get back on the gas the car starts missing. It has happened several times in the last few days. The car does smooth out after a few seconds but is a hassle and a worry.
View 9 RepliesFord Super Duty (1999-2016) :: 5.4l - Fouled Spark Plugs On Passenger Side
Have a 5.4l that has multiple issues.
1st, fouled spark plugs on passenger side. All of them have a carbon glaze. That side of the engine seems dead. I checked the pcv valve and its fine. I took the head off to have fixed a broken exhaust manifold screw. After reinstall when The engine started and there was a lot of white smoke from the exhaust. Then it quit smoking. I was hoping it was from the new exhaust manifold i put on, guess not. I took the intake manifold off and noticed that there is an extra hole past the back of the manifold that the manifold gasket goes over but not the manifold itself. The pictures Ive seen make me think the setup is correct, but what is the extra hole for?
2nd, high idling. Around 2000rpm's. I am guessing its because of the right side not working for smoother idling?
Nissan - Altima :: 2002 - Shudder When Idling In Drive
I have a 2002 Nissan Altima. When I am sitting at a light, there is sometimes a shudder that runs through the vehicle. If I put it in park while at a light, it doesn't happen. Also, when I'm accelerating, there is a sound like a rattling growl coming from the front right of the vehicle.
View 4 RepliesNissan - Altima :: 2002 - New Clutch Replacement After 6 Weeks - Cause?
On 4/11/11 - we replace the clutch in our son's Nissan Altima. Yesterday - the clutch died as he was getting on the highway. It was towed to the same repair shop. They took a quick look and said it's likely the new clutch is gone. They weren't sure what our son did to it. We're baffled. What could he have done in 6 wks that would totally blow a brand new clutch? At this point - we don't know whether to throw good money after bad.
View 7 RepliesNissan - Altima :: 2002 - Stud Broken From Inside Of Wheel
I went to a big box store to have new tires put on the rear of my 2002 Nissan Altima. They told me I had a stud broken from the inside of the wheel. The lug nut is still attached, and they can't get the wheel off. Both the stud and the nut turn freely within the socket. Is there any way to get this off without having to pay the $70 a tire place will charge me to fix it? I don't know how long its been like this. I currently have three new tires and one old.
View 2 RepliesNissan - Altima :: 2002 - Grinding Noise From Driver Side Wheel
I've got this 02 Nissan Altima 126,000 miles. I did a front brake job on my self, new rotors and ceramic pads. Immediately after the brake job, I started hearing this horrible grinding noise when weight is shifted to the driver side. It happens when I take apply the brakes or make a right turn. When making a right turn I don't need to apply brakes to hear it. I can sometimes hear it faintly when driving normally.
I took it to my mechanic. He first inspected my brake job, disassembled the rotors and pads, applied brake grease, and reassembled everything. The problem continued. He lifted the car, and had me get in, put it in gear, accelerate, then applied brake, no noise. There is no sign of anything rubbing or grinding in the wheel assembly.
After inspecting the tie rods ends, he replaced the inner and outer on both sides. No Luck. He then replace the ceramic brake pads with regular pads which has reduced the noise but it is still there. I asked around and two other mechanics have suggested the wheel bearings, my mechanic believes this is unlikely.
Toyota - Corolla :: 2002 - Tighten Spark Plugs To Same Torque Specifications As Regular Plugs
I am changing my own spark plugs for the first time. I have a spark plug wrench, dielectric grease, anti-seize compound etc.
I have a Haynes manual for my 2002 Toyota Corolla. The book was written before Irridium plugs were used. Should I tighten the spark plugs to the same torque specifications as regular plugs? The book says 158 inch pounds. How do I know I have tightened them to the right amount?
How do I avoid cross threading the spark plugs? What happens if you cross thread the spark plugs (assuming the car seems to be running fine)? Would I need a new engine or expensive repair when it is time to replace the spark plugs again?
Ford F-150 (2004-2008) :: Missing And Rough Idle After Changed The Spark Plugs
I changed my spark plugs now I got a miss and rough idle .#2 and 6 seem to be the ones that miss the idle don't change when I unplug the coil , I take coil off and put it next to the motor it sparks ! I put everything 3 plugs and got about 200 miles on them and 3 out of 8 had melt downs and left me on the side of the hwy. I got autolights in it now but it got a miss and rough idle ! Did I not do something right ?
View 7 RepliesNissan - Altima :: Condensation On Oil Cap And Dark Oil
i have a 2003 nissan altima with 99288 miles on it. i just got it changed yesterday and one of the tech's showed me and said there was condensation on the oil cap and the oil was dark. he recommened an oil system cleaner. is this accurate or is there something more i should worry about? he also said i was 1/2 qt low. last time i got my oil changed at the same place he said my oil was 2qts low and recommened a semi sythenic blend to flush things out, which i did do. i usually get my oil changed about every 4000 miles or so, i try for 3000 but not too successful. i also drive 1/2 hr to and from work every day at a min.
View 11 RepliesNissan - Altima :: No Acceleration - Car Would Not Move
As I was driving home, I came to a stop. When I depressed the accelerator to move, nothing happened. No gas was getting to the accelerator, the car wouldn't move, but the engine was still running. So I shifted the car in park and back to drive and I began moving. This happened on several occasions.
What is the problem? The gas filter? The gas pump? The fuel injectors or The transmission?
Ford F-150 - 1997-2003 :: 1999 - Replaced Spark Plugs - Started Shaking And Missing?
I have an 1999 f150 4.2l only 82,000 original miles.i have had truck since new .i just replaced the spark plugs for the first time.i used autolite plat. I also changed fuel filter the truck started to run like crap now shaking and sorta like missing.i pulled the plugs again rechecked the gp reinstalled them installed new wires still runs like crap.went out bought new motorcraft plat. plugs gapped at .054 still runs like crap..so i checked the gap on original plus that have been i the truck since new the gap on them are .074-.075. should i try and gapp the new ones to this the truck ran like a dream with the original plugs at this gap????
View 14 RepliesNissan - Altima :: 2006 Just Simply Not Turning Over
So, my family owns a 2006 Nissan Altima, and it's developed a strange problem recently. It would start fine when cold, but then if I park it and come back 20 minutes later, it won't start again. Apparently this is a thing that happens with Altimas. Now for a while, it was starting after two or three tries, but now it just simply isn't turning over. When I watch it under the hood, it shudders some, and then there's a puff of warm air/exhaust, i don't know. I've read it might be the cam shaft sensor, but after replacing that the problem hasn't gone away, and a few people have said it might be the fuel pump, but I replaced that as well and it's still not starting up. I'm thinking i might try to replace the crankshaft sensor next but I thought I would ask here for advice and opinions just in case. This isnt the first time this has happened with this car, apparently - this happened once before, and the camshaft sensor being replaced fixed it.
View 15 RepliesNissan - Altima :: 1997 - Idles Up And Down / Stalls If Not Given Enough Gas
I have a1997 Nissan Altima 140k miles with the manual transmission. I have a fuel problem that I can't seem to solve. every 1-2 days and only intermittently and unpredictably my car starts to idle up and down and occasionally if I don't give it enough gas they car may stall but the stalls only happen when I am not pressing the accelerator, meaning only at resting idle. since I am fanatic on washing my engine, I initially though that spark plugs were dirty or not working, I changed the spark plugs the distributor cap and the wires but the symptom continues. then I check the resistance of all the four fuel injectors and all of them read at around 12.8 ohms. I have also treated the fuel system twice with injector cleaner, the kind that you find at a gas station but still, the problem persists.
if it is not too much trouble I have another smaller questions. if the car sits overnight or for a couple days, the shift is really easy but as the car warms up the shifting becomes harder. could the transmission fluid need to drained and replaced?
Nissan - Altima :: 1997 - Cleaning Egr Ports?
on 1997 Nissan pickup 2.4-liter engine do you have to take off the valve cover to clean out EGR ports.
View 1 RepliesNissan - Altima :: 2003 - Won't Start When Engine Is Hot
2003 Nissan Altima 2.5 SL automatic - starts fine when the engine is cold but won't when the engine is hot. It acts flooded. I've changed the camshaft and crankshaft sensors, spark plugs, one spark plug coil, radiator, valve cover and the coolant temperature sensor. The car will turn over but will not start - sometimes it will after 5-10 minutes of trying.
View 1 RepliesNissan - Altima :: Temp Runs Hot Then Cools Up And Down
My wife has a 2001 Nissan Altima GXE with 89,000 miles. The car seems to run hot with the temp gauge reaching the "H" but never passes it, andwhen air conditioner is on it blows hot air; Then the car cools down it the air cools again, and this seems to happen all of the time.
Now, it's been happening for at Least 3 months, during this time it has had a tune up, the radiator flushed & hoses, thermostat replaced & lastly the ..... Sensor has been replaced & still the same thing happens the car temp runs hot cold up then down. We are at a loss here.
Nissan - Altima :: 2001 - Cooling Fan Not Cycling Off
I have a 2001 Nissan Altima. I seem to be having a fan problem. I started noticing that about 2 seconds after I turned the car off, the fans would come back on and run for ~25-30 seconds. I brought it in and my mechanic was thinking maybe a defective thermostat, so we replaced that. It still keeps happening, but now I've realized that the fans come back on anytime the car is turned off when the fans are running. If the fans are not running, they won't come back on. I've been trying to pay more attention to what is going on and when I first turn on the car, no fans are on (at least not the high fan, not sure if there are more than 1) After driving around town, the fans will turn on.
Normally, I believe the fan should then turn off once the coolant temp gets below a certain level. I let the car sit idling in the driveway for 15 min and the fans never turned off. I took it back to mechanic and repeated the idling for 15 min, fans never turned off. He checked the coolant temp with some sort of sensor and the temps were reading between 166-170 depending on where he aimed his device, so he said the fans should be turning off and it doesn't seem like the car is overheating.If he unplugged the temperature sensor, the gauge would go all the way to cold, but nothing changed for the fans, so he didn't think that was the problem.He took the fan relays along the edge of the car and swapped them around and nothing changed, so didn't think it was a relay problem. He removed some sensor on the passenger side on the back part of the engine and the fans got really loud and really fast. When he replace that, the fans would go back to normal until the engine temp got hot enough to turn them on and then they wouldn't go off again. He's thinking that sensor might be the problem, but isn't 100% sure. I think he said this was the cooling fan sensor or switch.
On a side note that may or may not be related. About 5 years ago the water pump broke. It started having the fans on all the time (even from a cold start), that turned out to be a faulty knock sensor. There was a knock sensor code and he replaced the knock sensor and then the fans went back to normal cycling. I didn't have any problems until early last fall, when I started noticing my current problems. I didn't worry about it until now, because as it got colder outside, it wasn't an issue. So outside temperature definitely effects it.
There are no codes this time.