Toyota - 4runner :: Starter Eventually Engages And Cranks 2 Or 3 Times But Engine Does Not Turn Over
During the cold snap over the last few months, my 1997 Toyota 4Runner has been having starting problems with the following symptoms in this order:
I turn the key and nothing happens.
I keep turning the key from off to start, and the starter eventually engages and cranks 2 or 3 times, but the engine does not turn over.
I keep trying and the starter engages and keeps cranking even after I turn the key off.
I panic, and turn the key on and off until the starter stops cranking.
I try a few more times and the starter cranks and the engine catches, but lugs until I pump a little gas.
Really weird thing. Occasionally, after the above sequence, the emergency brake light stays on even though the brake handle has been disengaged, and it feels like I have no power, then the light goes out and the car runs just fine.
The problem in intermittent. Cold seems to cause it although it doesn't cause it every time. Rain may be a factor as well. Sometimes, I only have to turn the key a few times, and then the starter will engage. I changed the battery after the trouble began, and it cranks well if and when the starter engages.
Up until this I have not had a day's trouble with this vehicle other than a little belt squeaking.
Lumina :: 1996 / 3.1 - Turn Key Wait 2 Minutes For Fuel Pump Then Start?
I have a 1996 Lumina 3.1. For the last few years, every now and then I would turn on the key, all electrical systems, lights, windows, radio, etc. would work but it wouldn't turn over. If I waited about 4 minutes it would start perfectly and it wouldn't happen again for up to a month. Last week it did it and after I waited and tried it again it turned over once then everything went dead. A mechanic (friend) installed a new battery and it started. He took it to his shop and installed a new computer. Everything read fine, but now when you turn on the key it will turn over fine but not start. Leave the key on and wait about 2 minutes till you hear the fuel pump start and the engine will start fine. If you stop for a few minutes it will start but if you stop for more than 5 or 10 minutes you have to wait for the fuel pump to come on again.
View 7 RepliesCamry :: 1996 Toyota Starter Clicking But Does Not Turn On
I have a 96 toyota camry that won't start. when i turn the key, the starter clicks but doesn't turn. I replaced the starter and it works fine (as does the one i took out). the battery was obviously checked and is charged. When I hook up the starter to the leads and its not in the engine it doesn't turn (in other words, its not a locked engine). I replaced one of the fuses in the starting relay and it didn't make a difference. So the problem is between the battery and the starter - the starter isn't getting enough power (if i take it to an autoparts store it works when hooked up to their system but doesn't work (but makes a click) when hooked up to the car.
View 3 RepliesFord 7.3L Power Stroke (1999-2003) :: Starter Does Not Actually Turn Over For 1 - 3 Seconds When Turn The Key
Trying to track down an issue (annoyance) I'm having with my 02 7.3 4x4 excursion. When I get in the truck and turn the key (after waiting for glow plugs) the starter doesn't actually turn over for 1-3 seconds and sometimes up to 5. When the truck does turn over everything works perfect it's just an annoying delay.
View 13 RepliesJeep - Liberty :: 2009 - Starter Motor Turn On For Less Than Half A Second Then Turn Off
I have a 2009 Jeep Liberty with 43,000 miles which many times in the morning, the car won't start. I hear for just a brief moment the starter motor turn on for less than half a second then turn off. I take the key out and try again. It takes a few times for it to run. I have tried different keys and once it has been started for the day, it usually is not an issue until the next morning.
View 2 RepliesGMC :: 1978 - Starter Will Engage But Engine Won't Turn Over
Replaced starter after which when i turn key to on position starter will engage and actually start engine; turn to accessory and starter will engage but wont start engine. Checked double checked and so on installation. And then exchanged for another rebuilt starter with same results. the reason for replacing the starter in the first place was during the winter went out to start to let motor run fur a while which it did. Went to move before completely warmed up and killed engine starter never made another sound. 1978 gmc 6000....
View 9 RepliesC/K :: 1996 Chevy K1500 - When Turn Key On Sometimes Pump Won't Turn On?
I am thinking that maybe my ignition switch is bad and needs replaced. When i turn the key on sometimes the pump wont turn on and thus wont start (brand new pump couple weeks ago)
all my fuses are good
its only done this once but today it started fine ran for maybe 2 or 3 seconds and then died just like i turned the key off no sputtering or anything but started right up again and was fine
sometimes it feels like its lost power and burning alot more gas then it should and every now and then at higher rpm it will miss but only once and it very rarely does that
relay is good
ground to fuel pump is good
Golf/GTI VI :: Starter Engage And Turn On Engine For About 1/2 Second And Then Stop
Developed a problem that I'm trying to research a bit to see if there is a common problem. Haven't really seen too much info yet, other than a potential clutch switch that will continue to display "depress clutch!" That's not my problem.
I don't drive this thing more than once a month or so. But occasionally I'll drive it to work for week or less.
Basically, every once in a while I'll try to start the engine and the starter will engage and turn the engine for about 1/2 second and then stop. All lights on the dash stay on. I'll reset the key, and it will usually then start normally on the next try. Sometimes it does the same thing on the second attempt.
Battery is 100% topped up, as it stays on a battery tender. Battery load test shows great. Connections are tight and clean.
The other day I cleaned the main B+ terminal on the starter, made sure the terminal jamb nut was tight and cleaned; then assembled the terminal and torqued. Removed, cleaned and re-torqued the top bolt on the starter. Cleaned and re-tightened the main grounds. Also cleaned the solenoid connection and made sure it fit back on securely.
Was fine for about 6 starts then it did the same thing again.
The last work I did on the car was a clutch upgrade (myself)...literally almost a year ago. I've driven it about...500 or less miles since. So I'd have assumed bad starter connections, but I think I've ruled those out. I didn't drop the subframe, just the transmission. the problem did start pretty much immediately after that job and hadn't done it at all before that job.
So what other interconnects are in the system to control the starter? Relays, control modules, switches, sensors...I'm sure all of the above. Something is allowing the starter to turn for 1/2 second and then drops it.
Perhaps the battery is dropping below voltage while cranking and something is aborting the start?
I haven't really done much diagnosing other than a simple load test on the battery. I haven't taken voltage readings under cranking, voltage drops across wires or voltage readings at terminals yet. Ugh..I really just don't feel like it. Maybe I'll just dump the car into the Pasquotank River.
Not that it really matters, but I've also installed an APR K04, full exhaust, Carbino intake...I don't know what else. But it was all done quite a while ago, by me. This second clutch I've done seems to have been the thing that triggered this particular problem.
Chevrolet - S-10 :: 2000 - Starter Clicks Once / Engine Won't Turn Over
I have a 2000 Chevy S10 (4-cylinder, rear wheel drive, the most basic model). A few months ago, the truck wouldn't start. The starter clicked a single time when I turned the key, and the lights on the radio came on, but nothing else happened. Several hours later, I attempted to start the truck again, and it started just fine. I disconnected the battery and found some corrosion on the positive connection (not that bad), and I assumed it was because of a bad connection.
I cleaned it and haven't had any problems since....until last night. The truck once again wouldn't start at a gas station. One click from the starter but nothing else happened. I cleaned out the battery connection again, and the positive terminal was again slightly corroded, but it wasn't that bad. The truck started after I cleaned out the connection and it got me home, but wouldn't start again after I shut it off. Can a bad battery cause repeated corrosion or possibly be the problem? I'm hoping it's just the battery, but I don't want to get a new one until I'm sure...
Ford F-150 (2004-2008) :: Engine Turns Over And The Starter Engages But It Won't Fire
My 2008 F150 5.4l SCrew wouldn't start this evening. The engine turns over and the starter engages, but it won't fire. Oddly enough the starter stays engaged after I take my hand off the ignition! I have to physically turn the key off for it to quit (didn't want to burn out the starter). The culprit may be the wet weather....it's been a lot milder today and we've had some freezing rain that turned to drizzle. My truck has only done this once before (last year I think). I eventually got it to start tho.
View 13 RepliesSonata I45 (YF - 2011+) :: Starter Cranked Normally But The Engine Wouldn't Actually Turn Over
Had an odd situation earlier tonight. The starter cranked normally but the engine wouldn't actually start. I let it go for 10 seconds and hit the button again to make it stop in order to protect the battery. A few seconds later, I tried and it fired right up without a hitch. The MIL never came on so no codes most likely.
Car has 17k on it. 2013 2.0
Ford F-150 (2004-2008) :: Remote Starter Does Not Turn The Engine Over?
My parents have an 07 f150 with remote start and for some reason it will not work, it locks the doors and turns the key on but it doesnt turn the engine over, we brought it to a local dealership and they just unplugged it and plugged it back in and it started working... but later down the road, like 150 kilometers my mom got out to go shopping and it wouldn't work again, does this mean the whole module has to be replaced or is there a quick fix to this, it looks like the stock ford remote start but it has a separate keychain for the button, if it has to be fixed, any instructions on how to do it?
View 3 RepliesAccent MC (2006-11) :: 2010 - Engine Would Not Even Turn Over / Just A Click Of Starter Solenoid
I have a 2010 Accent with 106 000 km on it (Canada). A couple months ago (just as warranty expired) the car would not start. Nothing. Engine would not even turn over. Just a click of the starter solenoid. battery had a load test and is fine. Removed negative battery cable and cleaned the cable where it bolts to the body under the battery tray. Battery terminals were both cleaned at the same time.
Things worked fine for a couple weeks and the problem is back but worse. Everything in the car works fine when it won't start. If I continually turn the key to the start position it will eventually start to turn over and start fine. Sometimes it takes 20-30 turns of the key till it turns over and starts. When it does turn over and start, the engine turns over fine at the normal speed. Not slow like a weak battery.
Dealer is useless. Had a coil go a couple months back just before the warranty expired and they told us that the reason the coil went was that the car had been rust proofed by someone other than Hyundai.
Silverado - 1500 :: When Key Is Turned / Starter Clicks But It Doesn't Turn The Engine
It's a no crank, no start issue. Battery is only a few months old and tests fine (800CCA,) starter is only 2 months old and we've pulled it out a couple times to have it tested and it's fine. Positive and negative battery cables are also fairly new (last spring.) I've tested pretty much every fuse and relay in the truck that had to do with the starter, etc. My brother has tested the resistance on most of the cables and wires (battery cables, alternator, starter, etc.) Anti-Theft has been tested as well.
Now, here's the odd part. When the key is turned, the starter clicks, but it doesn't turn the engine... at all. About the only thing I haven't tested is to see if the engine is locked up (which would really, really suck.) Now, this is an L76, 6.0L engine. It has D.O.D and variable valve timing, so the issues may be different than the 5.3 or 4.8.
Dodge - Neon :: 1998 - When Key Is Turned Starter Tries To Turn But Engine Does Not Spark
My Neon needed a water pump. At 204K miles the timing belt should be replaced also. The pump and belt were replaced. The motor started and the car drove about 1000ft. and stopped. There was no more spark. The car was checked to make sure that the timing belt is on correctly. The cam points to top dead center when the #1 cylinder is at peak and the crankshaft is at top dead center. Both marks align. When the key is turned the starter tries to turn but the engine does not spark. Electricity goes to the coil pack. 1998 Dodge Neon 2.0L SOHC 4 cylinder....
View 2 RepliesFord - E150 :: 1987 - Starter Struggles To Turn Over Until Engine Cool Down
I have a 1987 Ford E-150 with 160K - used to haul the race car. It's had a lot of issues and the latest is that when the engine has warmed up, then shut down, the starter struggles to turn the engine over until the engine cools. Once it does, it turns over and starts right up.
I figure it's the starter getting hot, but I want to know why this would be the case. Does the heat expand the starter shaft so it binds a bit with the bearing? Is it the increased resistance of the wire?
Ford F-150 - 1997-2003 :: 2002 - Starter Did Not Turn Or Crank The Engine
I have an 02 f150 5.4 4x4, drowned it a while back, thought i had hydro lock, crank can be turned by hand though as far as i can with a wrench, so internals seem to be fine, no bent or broken rods that i could tell, ripped everything apart cleaned it up put it back together, new fuses, new ignition relay, new starter, alternator and battery as well, turned the key to on and got all my electronic stuff back up, turned to start and it all goes dark, which i assume is because at that point its sending power to the starter, but the starter didn't turn or crank the engine...
So question being when i put my new starter on is it possible that i might have crossed a wire or something that would cause it to not crank? and due to the fact that I had water in it, and had hydro locked it, all my plugs are out, now I know that spark is needed for the engine to run, but shouldn't be needed just for the crank to turn right? question being is that once i fix the wires on my starter, I am looking for initial crank before start up, so do i need to put a plug or two back in and hook them up to make it crank? or will it crank without them? and yes I did replace all my fluids as well.
Lexus RX 2004-09 :: 2007 RX350 Engine Doesn't Turn Over - No Noise From Starter
I just purchased an 07 RX 350 with a salvage title. I'm going to fix it up and drive it but I'm trying to figure out why it won't start. It was hit in the front driver side corner, bent the radiator support and crushed the bumper and head light, but that is about the extent of the damage. I tried charging the battery and I get power inside and the other headlight seems very bright, but when I try to turn it over, I can hear what I think is the fuel pump engage but the engine doesn't turn over and there is no noise from the starter. Is there a sensor or something that would be stopping it?
View 4 RepliesFord Wiring/Electrical :: 1986 - Starter Continues To Turn Over Even After The Engine Fires
1986 ford f150 standard cab, manual trans with 3 plus overdrive.
1989 302 rebuild v8. When trying to start occasionally the ignition continues to turn over..
Even after the engine fires, the starter continues to turn over until I have to disconnect the battery to stop it. Then it fires up fine afterwards what could the problem be.
I'm thinking the starter, or the ignition switch but I also heard it could be the starter solenoid.