Lexus ES 2007-12 :: Transmission Hesitate When Shifting From 2nd To 3rd Gear When Not Warmed Up
Bought a 2007 es350 2 months ago and transmission shifted fine during test drives but now seems to hesitate when shifting from 2nd to 3rd gear when not warmed up. Also seems to not engage at low speeds of around 5mph again when cold. Seems to shift normally when warmed up or after the the first couple shifts of the morning. Is it a simple fix or a prelude of something worse to come? Other than that I love the car so far.
View 7 RepliesLexus LS 2007+ :: 2008 LS460 Vibrate At Idle While In Gear
I have a 2008 LS460 with 79K miles. Everything on the car is great, except this vibration at idle while in drive. For example, when I stopped at a red light I feel this vibration through the steering wheel, in the driver seat and the passenger side. Now, when I put it in reverse, neutral or on park (foot still on or off the brake and vehicle stopped) the vibration goes away.
View 14 RepliesLexus LX 2008+ :: LX570 Front Seats AC Won't Turn Off
Just picked up brand new LX570 a few days ago, however I could not turn off the front air conditioning even though have tried so many times of pressing the A/C icon on the screen.
View 6 RepliesLexus LX 2008+ :: 2010 LX570 - Vibration / Shaking At All Speeds
I'm four weeks into my 2010 LX570. From first day, I've had vibration/shaking at all speeds--the shaking/vibration is not in the steering wheel like a few others have described. The vibration/shaking is similar to what one experiences going over a railroad track in a small/lightweight vehicle, except it happens on all types of roads and at all speeds.
Two trips to two different tire installers and one trip to Toyota (the closest Lexus dealer is a couple hours for me) to speak with their Lexus-certified mechanic and it was chalked up to the Dunlop tires. The Dunlops had excessive road force (three were between 28 and 45). Three separate sessions with Lexus Customer Relations, and nearly two weeks with Lexus of Orlando (they were extraordinary, even though I did not purchase from them), all four tires were replaced with Michelins, road force balanced to less than 8 each, and the vehicle extensively tested. They bent over backwards and were exceptional. While the problem has been minimized, I still feel the vibration/shake.
I'm coming out of years with several Range Rovers, but every other vehicle I have does not vibrate/shake, from my Tundra on up. I just spent two weeks in an ES300 and it was rock solid, at half the weight and half the cost. Additionally, none of my Land Cruisers (previous generation to the current) were anything like this. The LX is a great vehicle, but the vibration/shake is a real issue.
Lexus LX 2008+ :: Mid Pipes For LX570 To Fit Directly To LongTube Headers?
I have a lx570 2013. I bought Doug Thotley's Longtube Headers. I haven't install yet, But I am about to.
I need to get my self a set of mid pipes that would hook directly my Doug Thorley's LongTube Headers and into the oem cat back.
I looked around it I found this set. Link Below: [URL]
Also, a friend of mine of mine has a LX570 with JBA long Tube Headers (Titanium), He also wants a set of mid pipes to fit directly to his Jba long tube and into his oem cat-back.
Lexus LX 2008+ :: Horn Fuse On 2011 LX570 Keeps Blowing
My horn fuse on my 2011 LX 570 keeps blowing after first use of horn. What could be causing it?
View 3 RepliesLexus LX 2008+ :: LX570 Rear Liftgate Won't Stay Closed
Having problems with my rear power liftgate on my 2011 LX570.. When it is open if I press the close button on the rear door it closes then beeps twice and opens up again. Every thing is clear by the door jam and all of the pieces look fine (nothing bent). When I close the door manually I can hear the lock cycle so that is engaging.
This feels like an electronic problem. The button on the dash and on the key fob only work intermittently to open the door and neither will close it. Yes the rear door off button is not engaged either.
Lexus LX 2008+ :: 2010 LX570 Rear Hatch Doesn't Open?
Just got a 2010 LX570 and the rear hatch doesn't open with key remote or close when button is pressed, just beeps twice.
View 4 RepliesLexus LX 2008+ :: High Idle And Engine Noise Every Morning On Starting LX570
Every morning when I start my LX570 it starts with the idle higher that normal and then after 1 or two minutes is settles.
Along with the higher idle there is a little extra noise from the engine, after 2 minutes the noise goes away and all normal.
Is this the way they start in the morning?
Ford Transmission :: Slow Shifting In Gears Then Start Slipping / Vibrate For A Few Seconds
I own a 2005 f-250 superduty with the 6L diesel. Just recently when I leave to work in the morning I notice the trans shifts slow through the gears and when it does start to shift it will start slipping then kinda vibrate for a few seconds then finally shifts into the next gear. It will do this through all the gears until I get up to speed on the highway. After it warms up it shifts and drives great until I let it sit for around 8hrs or more. I really hope I don't need a new Transmission considering I bought this truck as is from the dealership just a little over a month ago. I have checked the trans fluid it is full, I even drained all the fluid and replace with new and it still does the same thing.
View 4 RepliesIS F (2008-2014) :: Clunky Shifting From 1st To 2nd Gear
Ok, so in M mode shifts can be a little rough from 2nd to 3rd unless I give it enough gas. It's no big deal and my car has always been like that (owned it since 9/2013). But as of yesterday, shifts have completely changed from 1st to 2nd. It is clunky, extremely quick and lurches forward every time in M mode. It has NEVER done this before and it kinda sucks.
I've read all of the threads regarding tranny fluid, belt squeak, etc. and haven't specifically found anything like this. I haven't done anything to the car except the ELF recall and an oil change about a month ago.
IS F (2008-2014) :: 2011 - Shudder When Shifting Into 1st From 2nd Gear?
My 2011 ISF has around 50K miles. Recently I noticed that when I shift into 1st from 2nd, usually on approach to a slower curve or slowing down to a light, there appears to be a distinct shudder. It doesn't happen all the time, and it happens regardless of Sport or normal mode.
Right after it shifts to 1st and the RPMs climb (or so it seems), I get 3-4 distinct back and forth movements .. i.e shudder. I think this is a recent phenomenon, as I know shifting into 1st is usually not very smooth, but I don't think I felt this shudder before.
No codes etc ...everything else normal. Don't think the trans is slipping, as car pulls hard and traction control is always busy. Motor mounts? Car is never tracked and driven spiritedly, but never ever abused or tracked. I do enjoy shifting it.
Santa Fe (CM - 2007-12) :: 2008 - Pulls To Right When Shifting To 4th Gear
Just had a new set of tires and a front end alignment done on my 2008 Santa Fe with 86,000 miles. Now when it is shifting into 4th or 5th gear it feels like your hitting a patch of Ice. The Truck veers off to the right for a quick second. It just seems like you can feel it in the left wheel. Other than that the truck does not pull and drives straight.
View 5 Replies4Runner/GX470 :: 1997 Auto - Hesitate Between Shifting Gears / Sputtering And Jerking Motion Momentarily
I have a 97 4runner Automatic that as your driving it hesitates between shifting its gears. Most prominently happens around 80km/hr shifting between gears.
Its a sort of soft sputtering/jerking motion momentarily. It does shift into the gear and does drive fine once its in the gear. My check engine light is on as well now....
Accent MC (2006-11) :: 2008 - Transmission Slipping A Bit / Delay In Gear Shifting
I have a 2008 Accent (base model for the most part, no C/C), and my transmission seems to be slipping a bit. The symptoms are: slow acceleration, a delay in gear shifting, and after the 30MPH mark, it takes forever to get up to anything near 60. I just wanted to know if it's a simple solution such as topping off the transmission fluid, or if it's a bigger issue.
View 5 RepliesToyota - Corolla :: 2008 - Grinding Occurs Intermittently When Shifting Up Into 3rd Gear
I bought 2008 Corolla S 5 speed with 62K miles. Now have 135K miles. When shifting up into 3rd gear, a grinding occurs intermittently, more often as miles accumulate. I try to make sure clutch pedal is fully depressed. No problems occur with other forward gears, up or down. What the problem might be and/or what can be done to fix? This is the sixth car I have owned with manual transmission. Never a problem like this!
View 5 RepliesLexus GS 2006-11 :: Transmission Hard - Jerking While Shifting To 2nd Gear
I have a 2006 GS RWD the transmission started acting weird 4 month ago went to many workshops and no codes were found in the computer and my problem is that when i am moving in the car for more than half an hour and stop the car seems hard and jerking while shifting to 2nd gear and if i put it in tiptronic it go to 5th gear immediately it seems ok when the transmission is cold so what do you think it has got 125000 miles on it and what is the normal temperature for the transmission so i can test it with mini vci...
View 7 RepliesLexus RX 2004-09 :: Transmission Slip / Shudder When Shifting From 2nd To 3rd Gear
I have 142k miles on my 2005 RX330 AWD. This week I can feel the transmission slip/shudder when shifting from 2nd to 3rd gear.
My local transmission guy is pretty reasonable but like most salesmen he's going to say rebuild it the entire transmission in lou of something less invasive.
Lexus GX 2004-09 :: Shifting Too Slow - Resistance Moving Into Or Out Of A Gear
I have had the habit of manually shifting down to slow my 2005 GX since new. Only have 55,000 mi so not really a high mileage or worn out yet.
Now the other day there was a resistance moving into or out of a gear (can't remember which) at a time where I needed to get moving so used some extra oomph to try to complete the change and seemed to have a resistance ..... and then felt what I guess was something plastic break.
Now the selector does not stay in 4th when moved left but springs back to "D". Also feels as if the spring resistance is less. All seems looser.
What am I looking at for repair and what is really amiss? Where is a diagram to see the broken parts and how to access it? ---- Part #?