Lexus LS 2007+ :: Brake Actuator - How To Know If Actually Failed Or Failing
I know that the brake actuator on the early LS460s has an issue. How do you know it's actually failed or is failing?
Do the brakes stop working?
Lexus LS 2007+ :: Infamous Clicking Sound Coming From ABS Brake Actuator Under The Hood
I recently purchased an 08 ls 460 and started noticing the infamous clicking sound coming from the ABS brake actuator under the hood. A $3000plus fix that is not in the budget nor will it ever be!..After doing some research trying to figure out what the actuator does i stumble across this Lexus technician PDF ...
..It clearly states on page 2 that "If a Toyota ABS system malfuctions, normal braking will not be affected!...My worry has never been the sound it makes,.. but that of me not being able to brake when needed!!...
[URL]...
Lexus LS 2007+ :: Annoying Squeaking Noise When Depressing Brake Pedal
Looking for a fix for the annoying squeaking noise often happening when depressing the brake pedal?
Dealer "bled" the brake actuator...did not work, said I need new actuators for 2.5k.... 2007 LS 460L ....
Prius (Gen 3) :: Loud Creaking Noise When Brake Pedal Is Pushed And Released
I traded my 2007 Prius for the 2010 III Prius on 5/30. I had 5 wonderful days with it and on the 6th day, it started.
There is a loud creaking noise when the brake pedal is pushed and released.
The dealership contacted Toyota and did everything that was suggested to correct the problem and no luck.
Prius (2004-09) :: Loud Creaking Noise When Press Down Brake Pedal
I've a UK 2004 gen ii with 69000 miles on the clock. When coming to a stop and also when at a stand still if I press down the brake pedal I get a rather loud creaking sort of noise. I guess that's friction brake related as no noise with using brakes when driving. Also a high pitch squeal when driving and turning steering wheel slightly to the left that stops when you press the brake pedal.
View 19 RepliesAccent MC (2006-11) :: Brake Pedal Making Creaking Noise When Depressed
My brake pedal is making a creaking noise when depressed and can also be heard when letting off the pedal. The noise is not coming from the brakes themselves (front/back are like new) but the pedal area or somewhere behind it. This noise doesn't start until I've driven the car for a little while. The brakes work fine for the most part but sometimes feel a bit spongy if making a sudden or hard stop. The fluid levels are fine.
I'm taking it in on Friday and hoping that the brakes just need to be bled a little or maybe the pedal just needs lube, but I'm worried it might be the booster or master cylinder---if it is one of these?
Lexus LS 2007+ :: 2008 - Brake Pedal Clicking Noise When Pedals Are Cold?
I have a 2008 LS460. I have a clicking noise coming from the brake pedal area. It happens in the morning when the brakes are cold. I had the same problem when the car was new, and Lexus put in a new actuator. It was ok for about 6 months, and started clicking again. Maybe 3 or 4 soft clicks when I push lightly on the brake pedal. Every time I take it in to Lexus, they say it has the new actuator, and the noise is so soft that they act like they can't hear it. The car is so quiet otherwise, that to me the clicking is very annoying. I have called Lexus corporate, to no avail. Sounds to me that they have a problem they don't want to admit.
View 9 RepliesLexus LS 2007+ :: Actuator Noise / Pump Pulse Sound During Braking
My 2007 LS 460 makes a noise like a pump pulse sound during braking. When I step on the brake before coming to a stop there is no noise but once the car is 20 feet before coming to a complete stop at times you feel and here a pulse or pump or vale sound in the front engine area. Sometimes as I increase pressure on the break pedal a little harder you can feel and here a single pule and at times 3 or 4 valve or break pump sound. What might be going here? I am certain the sound is not coming from the wheel area. It is definitely under the hood. Could it be a faulty load sensing proportioning valve or booster?
View 6 RepliesLexus GS 2013+ :: Creaking Noise When Parking Brake Is Set
I've got a '13 GS 350 F-Sport and when the parking brake is set and you go to get out of the car it makes a real weird creaking noise. Its only when the parking brake is set, if i turn the auto parking brake off, it doesn't do it at all.
View 11 RepliesSanta Fe (CM - 2007-12) :: Sensors In Gas Pedal Sending Bad Signal To Throttle Which Burned Out The Actuator
My wife's 07 Santa Fe goes into limp mode while she's on the freeway. Had it towed to a mechanic. They report codes were: 0101, 0102, 1295, 2105, 2106, 2173. They said the sensors in the gas pedal were sending bad signal to throttle which burned out the actuator. So they wanted to replace throttle body and gas pedal sensors. They wanted $895.
Didn't seem right, so towed it to dealer. They said the first mechs were just guessing. Only the throttle body needs replacing. They wanted $960 total.
I bought a used throttle body off another 07 SF with similar vin number to avoid needing the ecm to be reprogrammed. Cost $225.
Couldn't find procedure for replacement in my pdf shop manual. Seems like this should be simple though. Anything special I need to know? Am I on the right track?
Lexus LS 2007+ :: Starting Engine Without Brake Pedal Having To Be Pressed
Requiring that the brake pedal be depressed in order to start the engine can be a nuisance, say if the driver is out of the vehicle and the passenger wants to start the engine to run the A/C, etc.
There is a workaround though. Press the engine start switch once to go into ACC mode, then press and hold it for 15 seconds and the engine will start without the brake pedal having to be pressed.
Lexus LS 2007+ :: Less Brake Consistency - Can't Get Constant Pressure On The Pedal
Replaced my rotors and pads and I still do not like the braking feel as I apply constant pressure to the pedal. No matter what I do, I cannot apply even or consistent pressure to pedal and get the car to slow down smoothly or in a linear way. It feels like some power assist component applies varying force to the calipers no mater how slowly or quickly I try to slow the car down. It just isn't smooth like other cars I own. The brake pads grab fine, no warped rotor issues. Does your car brake smoothly from 40 MPH to 0? Is there some power assist unit that may be going out?
View 2 RepliesLexus LS 2007+ :: Brake Warning / Pedal Felt A Little Soft
I got the attached warning today on my 2010 LS600. The pedal felt a little soft after the warning. It kept popping off and on, dinging every 30-40 seconds.
I checked the brake fluid, it was full. Car has 36k
I had it towed in to Lexus and they couldn't get the warning to come back up.
Lexus LS 2007+ :: Brake Pedal Height Adjustment - Any Way To Reduce An Inch Or So
Perhaps a strange question, but is there any way the pedal height can be decreased. On my 2010 LS 460 it seems to be higher than on my previous 2005 LS 430 to the extent that I lift my foot off the accelerator pedal and miss the top of the brake pedal. It's happened often enough that I've been wondering if it could be reduced an inch or so.
View 1 RepliesLexus LS 2007+ :: Faulty Brake Pedal - Car Rushes Up When Slowing Down And While Turning
Team 4th Gen. Just a heads up. When I first bought my 600, the radar cruise was throwing an error due to a faulty brake light switch near the brake pedal. It was repaired but it appears the adjustment on that switch may not have been done.
I noticed cars rushing up on me as I was slowing down and turning many times, even causing a car to swerve hard to avoid hitting me.
I realized my brake pedal needed to be about 3/4 pressed to engage the brake lights. I also noticed I had to really mash the brake to disengage the cruise control. I then noticed when someone drove my car and came to a light. No brake lights even though they were def slowing down and not coasting.
So i had my oil changed today and had them investigate while it was there. There is an adjustment to that switch component and now the lights come on with hardly any pressure on the pedal and cruise disengages with very slight pressure on pedal as it should.
Sonata I45 (YF - 2011+) :: Creaking When Letting Up On Brake Pedal Slowly / Lightly
Had this issue with my Kia Optima 2013 pertaining to the brake pedal, now with my 14 Sonata Limited. When in stop and go traffic, parking lot driving, or pulling into the garage that requires a lighter touch on the brake pedal, the pedal has a creaking feel to it, like when closing a creaky door. I can make this happen of course when I push the brake pedal slowly with my hand. This also happens when letting up on the pedal slowly/lightly. Kind of annoying, but the brakes work just fine and dandy
View 3 RepliesLexus ES 2007-12 :: 2010 ES350 Won't Start - Brake Pedal Couldn't Be Pressed Down
My wife called and said her ES350 couldn't start. I told her to wait 5 minutes and tried again. It still wouldn't start.
So I went there and tried to start the car. My first try did not work either. I noticed that the brake pedal couldn't be pressed down. It was quite stiff. So I pressed hard on the brake pedal and tried again. This time it started. It has been working fine since then.
Lexus LS 2007+ :: 2013 - Clicking Sound When Depressing Brake Pedal Every Time
I just got a used low-milage 2013 LS460, and noticed that every time I tap the break pedal I hear a "clicking" sound coming from under the dash or hood. This seems to happen every time I touch or press on the brakes, at seemingly any speed. It sounds almost like an actuator of some kind... perhaps like the type which allows the transmission to shift out of park. Is this normal, or an indication of a an issue?
View 14 RepliesSanta Fe (CM - 2007-12) :: Wheezing Noise And Then A Click After Depressing Brake Pedal
I have a 2010 Santa Fe w/ ~25,000km. Yesterday, I noticed that after depressing the brake pedal (while driving) i hear a wheezing noise and then a click right before i come to a complete stop. When i am stationary, and i depress the break pedal, i hear the clicking noise but no wheezing sound.
I just took it into service today and even drove around the lot with one of the service techs and he says its normal. That the clicking noise is coming from the shifter release. I don't believe i heard this sound when i bought it, nor any other time till yesterday. The sound is driving me crazy! This cant be normal .... can it?