Lexus GX 2004-09 :: Back Up Plastic Cover Of Driver Side Is Cracked
Noticed that my drivers side back up plastic cover is cracked with a small hole in the top. Would like to RTV the damaged area to seal it but I need to remove it to make the repair. I've pulled some of the inner plastic on the door but can't get at the back up plastic cover.
View 1 RepliesLexus RC 2015+ :: Removing Back Black Plastic (aerodynamics) Comb Part?
I think the black comb looking things on the bumper look cheap.
View 14 RepliesLexus IS 2014+ :: Plastic Sounding Rattle (exterior) When Hitting Bumps
Experiencing a plastic sounding rattle (exterior) when hitting road bumps? This noise appears to emanate from around the wheels and can only be heard when the windows are rolled down. Model is 2014 250 fsport. The car sounds cheap when this happens.
View 5 RepliesLexus IS 2014+ :: Right Exhaust Pushed Back After Got Hit By Car
I got the JoeZ PTS axle back exhaust for 2014 IS350 and so happy with it. Last week, another dude hit me from behind and the right exhaust pushed back, not center aligned with the lower bumper anymore.
Is there any way that I can straighten it back again or have to get the new exhaust. The car is still drivable but sometimes I heard weird noises, not from the exhaust it self but probably from the connection to the mid pipe.
Lexus IS 2014+ :: A/C System Not Coming Back On After Ignition
I've been having this issue randomly with my car. Usually after I turned off the car with Climate system on it will come back on with car starting, but sometime it would not.
View 2 RepliesLexus IS 2014+ :: RPM Spike And Back To Normal Within Second When Decelerate
I have a 2015 IS350 FSport. I drive full automatic in Sport+ mode, and I notice whenever I decelerate, the RPM would spike up around 200rpm and back to normal within second. It is consistently when the gears are changing down. Is this normal?
View 9 RepliesLexus IS 2014+ :: Took Engine Cover Off, Can't Figure Out To Snap Back
Took my engine cover off and now trying to snap it back on and I can't seem to find the points where it clicks back into place. The top middle has a latch but my bottom half especially the right side is loose and I can't figure out where the snap into place points are.
View 2 RepliesLexus IS 2014+ :: Tachometer Automatically Slides Back When Turn Off The Engine
I would like to tachometer to slide to the right by default so I can see the extra menus and pop up displays. Every time I start my engine, I need to press the menu button on the steering to slide the tachometer to the right and when I turn off the engine, it automatically slides back to the middle. How can I keep it set to slide to the right by default?
View 1 RepliesLexus IS 2014+ :: Squeaking Noise Coming From Back Only When In Sport Plus Mode
I am feeling disappointed just came out of a lemon law suit with a kia optima I bought two years ago. I figured we'll I should buy a better brand this time which my brother recommended cause I was going to buy another Infiniti I always had good things with those cars. But the last 2 nights I have been hearing a squeaking noise in my rear end of my brand new IS 350 F Sport. Only in sport plus mode. I was driving home from work at 2 am and driving through a canyon road cause I want to see how this car does as soon as the road got a little bumpy I was hearing a squeaking noise come out of the rear of the car. Then I get home and I hear it going over my speed bumps in my complex of my condos. So I think we'll that's odd. I take it out of sport plus mode and back to eco and drive around the complex again and it goes away. Remind you I have 484 miles on the car.
View 3 RepliesLexus IS 2014+ :: Navigation Automatically Go Back To Previous Screen - Normal?
Is normal for this navigation to automatically go back to previous screen while you are on "Radio" screen?
View 4 RepliesGolf IV R32 :: Emanating Smoke Of Plastic Smell From Sides And Back?
Today after driving in traffic for 20 mins followed by 100 for about 5 minutes I took my exit ramp and came to a light. My car started emanating smoke from the sides and back. The smoke is a classic VW smell of plastic. I sat at the light for about a minute while smoke was sporadically coming out. The light turned green and I pulled over to check this out. I can certainty smell it in my bay, interior and all around the outside of my car. My oil level is fine and the fuses on the battery are fine. The (not so accurate) temp gauge was right in the middle.
View 11 RepliesVolvo - Xc70 :: 2011 - Plastic Popping Noise Near Back Seat
2011 Volvo XC70. I'm hearing a popping sound similar to a plastic bottle popping coming somewhere from the back seat of my Volvo XC70. This usually occurs while driving a few miles after first starting the vehicle and happens only once. We've check the car for any plastic bottles that may have been lodged under the seat or inside the car and no bottles were found. Where this sound is coming from. There seems to be no mechanical problems associated with it, just this popping sound which is quite loud.
View 1 RepliesLexus IS 2014+ :: JoeZ Axle Back - Check Engine Light Turn On But Going Off Randomly
So after installing my JoeZ axle back for about 5k miles I noticed there was an issue. The check engine light was going on but turning off randomly. I finally decided to take the car to the dealer for them to check out. So what the dealer said is that the JoeZ exhaust "direct bolt-on bolts" restricted flexibility and caused leaks in the front cats. He said that the stock exhaust screws had the springs on it to allow flexibility when hitting dips/potholes. With that said, He recommended switching the front two gaskets and using the stock "spring screws."
I was wondering, encountered this problem with the bolts that came with the JoeZ axle back? I bought the JoeZ off a user here and it came with bolts, which i assumed came with the exhaust when it was purchased new. Not even sure if the bolts he gave me was correct, or if i just made the mistake of not using stock bolts.
Lexus IS 2014+ :: 2015 - Front Clunk Noise While Turning The Steering While Back In Fixed Position
When backing out of same parking spot, I always hear a clunk, clunk, clunk, noise in the front while turning the steering while back in the fixed position. I have heard this noise in the past but did not think any thing of it.
It's hard reproduce this noise, it seems to only be happening when backing out and turning the steering wheel. Car only has a little over one thousand miles.
Prius (2010-12) :: Intermittent Plastic Rattle Coming From Back End On Bumpy Roads At Low Speed
I've had this intermittent plastic rattle coming from the back end on bumpy roads at low speed. It's not the license plate and bracket (already fixed that one). Yesterday I happened to tap on the outside of my left tail light and heard it rattle with the same noise I'm hearing on the inside of the car. There is no rattle when I tap on the right tail light.
View 5 RepliesSubaru - Impreza :: 2002 - Noise Like Scrapping A Plastic Fork Against Metal Coming From Back Passenger Side Of Car
Less than a week ago I bought a 2002 Subaru impreza outback sport. Fun little car. However two days after I bought it I started to notice a noise coming from the back passenger side of the car. It sounds sort of like scrapping a plastic fork against metal. I have looked everywhere for anything that could be making the noise, as it seems to be coming from inside the car. IT also seems to get worse the longer I drive. I commute to work, and so for the first 10 minutes it's silent, then gets louder and louder, by the time I get to work its noticeably loud.
View 2 RepliesIS F (2008-2014) :: Black Plastic Shifter Surround?
I haven't been able to find the plastic piece without buying the whole carbon fiber center console.
View 11 RepliesFord F-150 (2009-2014) :: Top Portion Of The Steering Wheel Plastic?
Is the steering wheel on the Ford F150 Platinum leather and wood, or is the top portion of the steering wheel plastic?
View 1 RepliesIS F (2008-2014) :: Finding Material Type For The Stock Airbox (black Plastic)
what material is used for the stock airbox? The 90 degree "snorkel" intake tube that is held on by two rivets on my airbox has a tab at one rivet that is cracked. This allows the snorkel to move around and come unsealed from the main airbox. It is "pre-filter" so there is no performance issue, but I would like it to stay in place and look right.
Depending on the material, I was going to shave some slivers from a thicker part of the box and mix it with a solvent to make a paste and apply it to the crack. This will only work if the material "melts" in strong solvents like acetone/MEK. Once it dries, it will be good as new. I have done this many times with ABS and PVC. There is a small gap to fill so simply gluing might not be as strong.