Passat (B5) :: 2001 - Changing The Turn Signal Bulb?
I have a 2001 new passat glx 4 motion, the front blinker bulb on the passenger side went out due to a hit-n-run, I went to a body shop and the ppl there said they need to take the frot bumper and the headlight out to reach the blinker bulb, and it requires about 1 hour on labor which means 90 bucks, that sounds pretty expensive for just a dead bulb.
View 13 RepliesGmc - Envoy :: How To Replace Mirror Turn Signal Bulb
I have a 2007 Envoy SLT. The turn signal bulb that is located on the driver's side mirror is burned out. How do I replace the bulb?
View 1 RepliesTouareg :: Headlight Malfunction - Turn Signal Light Bulb Went Out
My T-rex was in recently for what seemed like 30 recalls... In the midst of it...my turn signal light bulb went out. They changed it...good thing cause you need to remove the ENTIRE headlight assembly with a special tool, etc. Well...my headlight now goes on/off as it hits bumps etc...was back in once to have it fixed...and has since started again. I noticed the entire assembly does not fit as well (tight) as it did originally, nor like the other assembly that has never been touched. Appears to have been the first assembly they have worked on and broke something cause now it does not mount properly...so after all that...
Had this headlight assembly removed?
Camry 2012+ :: Remove Bumper To Change Turn Signal Bulb
Thinking about getting a used Camry. Is there any issues with any of the years in the seventh generation Camry? What are some of your likes and dislikes of your car? For example I have been told that on the sixth generation Camry you have to remove the bumper to change the turn signal bulb. I have never had to deal with this, just what I have been told.
View 14 RepliesPassat (B5) :: How To Remove Front Turn Signal Socket To Replace Bulb
I have a 2003 W8 wagon and my front turn signal bulb went out. I need to replace it, but am having some problems. I removed the high beam cover to get to the turn signal socket, but I am having problem removing the socket. I was able to turn the socket slightly and was hoping I could just pull it back, unfortunately it doesn't seem to want to move. Is there a trick to remove the turn signal socket so I can remove the bulb? I don't want to force anything in fear of breaking something. there has to be a way.
View 1 RepliesFord F-150 - 1997-2003 :: 2001 - Mirror Turn Signal Bulb Replacement
How to replace the turn signal bulb that is in the mirror on a 2001 f150 supercrew? My Haynes and Chiltons books dont say a thing about replacing this bulb.
View 1 RepliesFord 6.7L Power Stroke Diesel :: 3156 LED Amber Bulb For Front Turn Signal
I'm looking for a 3156 LED Amber turn signal bulb for the front turn signal, I've looked around haven't found anything! Any success story with this particular bulb, and does it require a load manager when installing?
View 14 RepliesGolf IV / Jetta IV :: 2004 - Clicky Turn Signal Sound Without Hazard Lights Blinking
My Jetta has had an off-and-on clicky turn signal sound without turn signals or hazard lights actually blinking. I put up with it for a while, but recently it's been more clicky than not. I'm aware this is a common problem. I had already tried the cleaner spray "trick" which made the problem worse if anything. Today, I removed my signal stalk as described here and gave it a cleaning. After re-assembling, the clicky problem didn't go away, and now the high beams are always on (even with the key out of the ignition, and the car isn't running). I temporarily dealt with this by pulling fuses 18 and 19 for high beams. It's an ok short-term workaround. Low beams still work fine.
I'm considering replacing the hazard signal relay, but a while ago I messed up while trying to use ghetto removal keys to pull my radio.
Ford Super Duty (1999-2016) :: 2002 - Changing Front Turn Signal Bulb?
02 f250 SD...I need to change the front corner turn signal bulb... How the hell do I get to it? I see the grey plug that I need to take off in between the bottom of the light and bumper but have no clue how to get to it..and what is the bulb number?
View 8 RepliesFord Super Duty (1999-2016) :: Changing Bulb On Driver Side Front Turn Signal?
Is there a way to change the bulb without removing the grill and headlight? Seems like a lot of work to replace a bulb. 2013 F350....
View 3 RepliesFord F-150 (2004-2008) :: Tail Light Does Work For Hazards / Turn Signal Or When Braking
I have a 2004 F150 XLT and the passenger side tail light doesn't work whatsoever. The light does work for hazards, turn signal, or when braking. The passenger front turn signal works, so does the front and the driver sides tail light. Only the 1 tail light doesn't work. I bought a new brake light bulb and it didnt't fix it, so i swapped the drivers and passengers bulbs out, and it still didn't work. I replaced the 10 amp fuse (#36) in the fuse box. What is causing the problem.
View 2 RepliesFord F-150 - 1997-2003 :: No Brake / Turn Signal Or Hazard Lights When Trailer Lights Plugged In
I've got a 2001 f150 supercrew 4x4 with the 4.6. I plugged in trailer lights and now I have no brake, turn signal, or hazard lights. I've checked fuses and none are blown.
View 8 RepliesFord Super Duty (1999-2016) :: Trailer Has Running Lights But No Turn Signal Or Brake Lights
2013 F250 XL with factory towing package.
My camper and boat trailer do not have turning signal or brake lights when plugged into the round seven pin trailer connector. I have tried both the connector in the bed and under the bumper. I've also connected the trailers to other trucks and the lights work fine so I know the problem is in my truck.
Golf/GTI VII :: Wiring LED Taillights Without Signal Flash When Braking
Since the first time I saw the OEM LED taillights I knew I wanted them and I knew I didn't want that turn signal glitch when braking. There is, of course, the option to wire the LED tails the OEM "proper" way, but I wasn't interested in running multiple wires from front to back so I came up with another way.
All of the wiring to make these work without error* (This method will make the inner LEDs work as brake and Running lights, opposed to just running lights) is confined to the hatch and outer taillight areas.
The main thing that I knew I had to avoid was using the current Pin 1 wire to power the Pin 3 turn signals. For some reason unknown to me the Pin 1 wire wants to be a brake light even after the brake light coding is removed from the adaption channels relating to the pin out. So if that wire wants to be a brake light so badly then that's what I would let it be.
The idea behind the wiring is to use the power from the running light on each side of the hatch to power the turn signal on that respective side (hatch and outer amber signals) and then re-power the inner running light by using a jumper from the outer taillight power.
Now some illustrations to clear that mess up:
The top portion of the picture shows the stock configuration and then the modifications take place in the lower section
And here is a quick video showing that the LED Tails are working. (When brakes are applied the turn signals don't flicker...) [URL] .....
Santa Fe (DM - 2013+) :: Interior Lights Won't Turn On After Bulb Change
So I switched out my bulbs to standard LEDs. I was changing the back map lights when they all turned off.. I thought the timer just ran out but now they won't turn back on..
The rear light in the truck, map lights in the front and the side map lights.. Did I short something? I don't see how as to I wasn't holding anything metal in my hands.. I did have an issue trying to get off the back map lights (i gave up), but not my lights won't turn on....
Ford Ranger / B-Series :: Instrument Cluster Bulb Sometimes Does Not Came On When Turn Lights On
One of my bulbs sometimes doesn't come on when I turn my lights on. I actually have to hit the dashboard to get it to come on. Does it randomly. Ironically, it's been doing this ever since I pulled the instrument cluster out to change a different bulb. I don't know if I did something when taking it out or putting it back in. Anyway, what I can check to see why it's doing this? It's just one bulb that illuminates the right portion of the tachometer.
View 1 RepliesGolf IV / Jetta IV :: Right Turn Signal Won't Turn Off After Locking With Alarm
I would like to start off by saying I am new to this forum. I bought a 2005 Jetta GLI a couple of months ago and from the first day I noticed that occasionally when I would lock it with the alarm, the right turn signal would stay on. It was not much of a problem as I would just press the lock on the remote again a couple of times to turn it off. Lately it has become more frequent and annoying. I have to wait up to an hour so I can finally turn it off through the remote. I was thinking the relay probably.
View 15 RepliesPassat (B6) :: Make Turn Signal Lights All The Time
I see a lot of VW Passat 2006 who have the turn signal lights on all the time, like this. How do I get them like that?
View 10 RepliesNissan - Sentra :: Turn Signal And Hazard Lights Not Working Sometimes
The turn signals and hazard lights on my nissan sentra are working some times and all of a sudden they stop working. The problem is occuring almost every day. What could be the problem?.
View 4 Replies