Golf/GTI VI :: Clunk Type Noise From Transmission When Shifting In To Or Out Of 2 / 3 / 4
The first thing is that suddenly there's a clunk type noise from the transmission when shifting in to or out of 2/3/4. Also, when I'm in one of those gears, letting off the throttle and then re-applying lightly causes the clunk noise. However, I haven't noticed any actual performance difference, just the new noise. It's loud enough that I can hear it over the radio at a reasonable volume, and it may or may not be my imagination but I think I can feel it through the floor of the car.
The next thing is that in the mornings, the car seems to have trouble getting in to gear from a stop. So I'll pull up to a light, then stop, and if I take off the brake and get immediately on the throttle, the car will lurch pretty bad, even if it's only a little throttle. I've found that if I let off the brake, and wait specifically to hear/feel the transmission kick in, there's no lurch and everything is fine.
Also, on that same note, sometimes when I let off the brake at these times, the car nearly stalls. It hasn't stalled yet but it's felt close a few times.
As well, from a cold start, there is what feels like an absolute ton of engine braking in second gear, I can feel the car pulling back immediately after I let off the throttle, and this seems strange and new as well.
Golf VI R :: Drivetrain Clunk / Pop When Engaging Gear And Shifting 1st - 2nd
I have been reluctant to post another clunking thread because it's nearly impossible to accurately describe what is happening. But I have reached by breaking point and I wanted a few opinions before I take it into the dealer. I am still under powertrain warranty, but I want to be confident I am not wasting mine and the dealers time if I am just missing something easy. I also know dealers don't always take clunks seriously so I want to pinpoint it first.
Symptoms : Car has 50k miles. I am the original owner.
From a stop, when getting the car rolling moderately aggressively there is a clunk/pop noise from the car. I can slightly feel it in the pedals and it is fairly loud. Almost like a distant hammer and nail pounding. It's a single clunk, with sometimes a double "pop pop". It's noticeable even with the radio turned up a little. If you are smooth on the throttle it doesn't make the noise. It seems random, like something is hitting something which only happens under certain weight shifts.
It sounds like it's from the rear and the front. It seems to switch. But honestly I am not confident either way. Where it is. It is silent on turns, bumps, speed bumps, driveway, etc. I don't think it's the suspension. It is not a clicking/tapping, only a single clunk or knock.
It also happens in 1st/2nd in stop and go traffic. If you leave it in 1st and the traffic is moving from say 8-15mph where you don't need to use the clutch it will clunk during on/off throttle. Anything above ~30mph I haven't been able to replicate the noise with on/off throttle.
It also does it if I downshift when coming to a stop and don't rev match. Say you are slowing down and you go from 4th, 3rd, then 2nd, let the clutch out and it rev matches up to ~3,000rpm which causes the weight to shift forward....clunk! It is not easy to replicate which is another reason I am slow to bring it to the dealer until I pinpoint it.
Things I have tried:
- Subframe bolt torque check. Installed ECS spacer/bolt kit anyway.
- Sway bar links are tight, or at least they didn't budge at all.
- Adjusted the rear hatch a million different ways as it was making a similar noise earlier.
- Spare tire tightened, tools removed
- Rear seats up/down/mix/seat belts fastened, etc.
I was only able to locate one motor mount? Where they are. Seems fine. Dogbone seems fine, again hard to tell.
Suspect:
I have VWR springs, but I am 90% sure this started happening right before I had them installed. I did the rears myself, a well known shop did the front. I noticed the noise maybe 2k before the springs were installed.
Clutch linkage somewhere - I had issues with my transmission (early build). The clutch was replaced at 7k. I've always had a very loud flywheel and a grinding feeling in the pedal. Maybe the shifter linkage is hitting something? I have little experience with VW's so I am still learning and don't know what to check.
My rear harmonic balancer is cracking like everyone else. I have no vibrations yet and I don't see how it could be causing a clunk in the current state. Maybe a motor mount is bad that I cant see? It feels like something is loose in the drivetrain.
Golf IV / Jetta IV :: Auto Trans Shifting Hard From 2nd To 3rd Gear
1999 Jetta MK4 with only 124k miles on it. Everything is fine with the car except when the car shifts from 2nd to 3rd it is jerky/violent/forceful everything else is good with car except check engine light is on but I don't really care about that and I'll go check with autozone to see what the code is. I am able to feather the gas when I know its going to shift and I can make the shift pretty smooth. My question to all the experts is does this mean that this tranny is on its last leg or does it still have a lot of life left in it. My old Cabriolet did it for years and never was a problem.
View 5 RepliesGS 2006-11 :: Trans Having A Downshift Clunk / Jerk When Coming To A Stop
Or just can I just replace and go. I'm having some issues with trans on my 06 gs430. It's having a downshift clunk/jerk when coming to a stop. I just purchased a used trans, but would like to see if it could be ecu related. I have seen other comments from other member that they replaced the trans, but still the issues were present. Some stated that there was some issues with the ecu holding the trans solenoid longer then the usual.
View 6 RepliesCamry :: 2003 V6 - Trans Makes A Very Noticeable Downshift Clunk On Stop
I have a 2003 Camry LE with 1MZ engine and U151 5 speed auto trans. 138,000 miles The problem is that the trans makes a very noticeable downshift clunk when stopping.
With light driving you can feel what seems to be a 2-1 downshift just before stopping. With aggressive driving and rapid stop the clunk is felt either when stopping or actually after the wheels stop turning depending on speed and hard braking. If you stop aggressively it actually feels like someone hit you from behind. It literally shakes the car.
TRANS FLUID is full and clean. There is no smell or burnt appearance. The trans tests good in forward and reverse stall tests. Neutral to drive/reverse engagement is also quick and firm.
Here is the fun part. The condition does not exist when cold. After the engine and trans warms up it starts happening. Also, after presenting the condition with a hot trans, I can shift it out of drive and into 3rd and have no problem at all no matter how I drive. To make things more interesting, I can erase the trans learned values with a scan tool and the trans shifts normally for a couple of days before the condition returns.
We are concerned that there may be damage done if this condition continues.
Honda - Accord :: Noticeable Clunk When Trans Shifts Down Into Low Gear And Shudders
1998 accord 4 cyl auto, mostly on start up and when coming to a stop at a light it sounds like someone is under the floorpan hitting it with a hammer. maybe 5 or 6 hits. I've looked into the exhaust being loose and hitting but it's tight and has good clearance. could it be a broken motor mount letting the engine rock too much? next, SOMETIMES when the trans shifts down into low gear you get a very noticeable clunk and the car kind of shudders. planning on doing a trans drain and fill today. lastly the instrument cluster is a little strange. tach doesn't work at all, speedo is fine as is the gas guage but the temp is erratic. when the temp is acting up you can thump it with your finger and it will jump around.
View 9 RepliesTouareg :: Clunk When Shifting From 5th To 4th Gear
Today (not 2 days after taking delivery) I was travelling on the highway. stopped for fuel and as I am decelerating on the offramp when the truck shifted from 5th to 4th it went CLUNK, It did this twice, in the same circumstance. I can't make it replicate the noise every time. But 2 times in 24 hours is enough.
View 10 RepliesHonda - CR-V :: Shifting Auto Trans While Moving
Can any automatic transmission possibly be harmed by shifting from Neutral to Drive while rolling forward at around 30mph, or from Neutral to Reverse while rolling slowly (less than 5 mph) backward?I only ask because my new CRV makes a very slight sort of grinding sound when I do the N to D rolling shift, and the backward N to R rolling shift causes it to act as if it just stays in Neutral for several seconds, instead of promptly engaging Reverse. The manual of course says nothing about this. I thought all automatics were just fine with being shifted from Neutral to Drive or Reverse while moving, as long as you were headed in the right direction.
View 12 RepliesLexus GS 2006-11 :: Clunk Sound When Shifting From P Or R To D
"Clunk" noise when shifting from P or R to D happening to me right now with my '06 GS300. It doesn't happen all the time, but it happened all day yesterday and sounded pretty serious. Took it into the dealer today, still under warranty, and of course it wasn't happening. Tech said he will keep it overnight, let it cool down, and check transmission fluid level which could be the issue. If that isn't the issue they said it could just be a "normal" sound. My wifes 2006 Sequoia shifts smoother and doesn't make a sound when you go from P or R to D ... Don't tell me it is the break pads releasing either because that is just as far fetched as the normal theory.
View 14 RepliesPrius (Gen 2) :: Clunk Or Thump Noise When Shifting From D And R?
I've just bought a 2005 Prius, 142k miles. It's a great car, and frankly with any 'new' car I buy I always worry about new sounds. This time it's 'clunk' or 'thump' noise when shifting from D to R and vice versa. It doesn't happen all the time, but it's a noticeable noise that can be felt as well.
View 7 RepliesAccent LC (2000-05) :: Clunk While Shifting Into Second Gear
I have a 2005 Accent GL (4dr Sedan) base model, 5 speed. I live in Canada (not sure if that will play a part); I notice that when I shift from first to second there is a 'clunk', not really a grind, and not a major clunk... but it's noticeable. As the car warms-up, it seems to be less pronounced (or maybe I start to ignore it). Is this something to worry about? or could it be the clutch plates.
I have had lots of bikes with wet clutches and this is 'normal' for a bike going into first gear. With the bike it's due to what I call Hydrolic-stick ... (2 or more) plates 'sticking' when you let the clutch out, one spinning faster than the other. Off topic now...
Ford - Ranger :: Clunk When Shifting Or Accelerating
I own a 1994 Mazda B2300/Ford Ranger. Ever since I have owned it, there has been a slight "thump" when you let off the accelerator. Annoying, but for a cheap truck, I just ignored it. NOW, there is a clunk when I lift off, and when I hit the accelerator after shifting gears. There has been a loud "rumble" sort of sound for about two weeks, and I was told by a mechanic that I needed a "cat back" exhaust. Okay, but when I rev the truck in the driveway, it doesn't sound like the exhaust has issues. I DO get the rumble through the steering wheel and floor of the truck, and up until this morning, when I took the thing out of gear, or stepped on the clutch, the rumble sort of went away. Now, it doesn't.
View 4 RepliesF Series :: 99 F250 SD Speedometer Is Erratic / Trans Is Not Shifting Right
My speedometer is erratic, not reading correctly, and the trans is not shifting right. It gets up to 3000 RPM and I have to back off the throttle to make it shift to 2nd. Then after driving a while everything starts working right. Next time I drive the truck it does the same thing.
View 2 RepliesPassat (B5) :: 2000 V6 - Shifting With Trans Gets Hot (25-30 Min Run Time) And Slips
I just picked up a 2000 v6 passat with an automatic trans. I am new to passats, esp with autos. The cars transmission is having problems shifting with the trans gets hot (25-30 min run time) and slips. What is the trans code for this car and is it FWD or AWD? It has 220k, and the engine runs great. It was sorta an impulse buy, I plan on flipping it so hopefully tis a good investment. Any common things I should be aware of so I can get it tip top shape to sell it?
View 3 RepliesSonata NF (2006-10) :: ESC Off Light Comes On - Rough Trans Shifting
Ok 34,000 miles here and twice in the last week while driving the ESC off light comes on and the button does not turn it on. Today when it happened the trans shifted a little rough once, like it missed a shift. If I turn off car and restart I am good. Spoke to dealer earlier in week and they want to reset my shift points or something again (several times).
Other than that the car runs great and my Kuhmo's are worn out, ughhh. Does this event get recorded and if so how long? No check engine lights.
2009 SE V6
Ford - Focus :: 2007 - Trans Not Shifting In Drive
I purchased my Focus brand new in late 2007. Within a year or so of owning it I noticed that sometimes, in drive, when I would get up to about 40mph the engine would rev for a second or so, before shifting into the next gear, sort of hesitating. I mentioned this on the next scheduled maintenance visit, the mechanic took a look and said he couldn't find a problem so it was probably just an anomaly. It has happened ever since about a few (less than ten) times a year. Every time I went in for one of those mandatory visits I would mention it and get the same answer.
Fast forward to last Thursday. Got it up to 40mph, and it started revving again. Did what I normally do, which is take my foot off the pedal for a few seconds, and try again. This time, it didn't ever shift up. I'm not a car person, but it was like it was caught in neutral. I had to slow down, get it to shift down, then keep my speed below 35. It refused to shift above 40. Checked transmission fluid, was a little low so I topped it off, but no change. Drove home in 2 with no problems. Wish I had an RPM meter so I could be a little more specific but my car conspicuously was not equipped with one...
Toyota - Camrysolara :: 2000 - Trans Not Shifting Into Reverse?
my toyota solara v6 SE 2000 has as i think trans problem it won't reverse yesterday as i took it last week to semeone to do engine oil change but instead he drop off the trans oil and add more oil to the engine , and as i don't know i drove it like 1/2 mile with no trans fluid , we figured out that late ! i keept shifting between D & R, 2 & L IT ALWAYS GO FORWARD and no more reverse, what's going on ? before i replace the trans !?
View 5 RepliesAzera TG (2006-11) :: Transmission - Clunk When Shifting From 4th To 5th Gear
2007 Azera 120k miles. Have noticed first thing in the morning when shifting from 4th to 5th gear, I hear a clunk.. Yesterday I heard two clunks when downshifting from 5th to 4th. Tried shifting the car manually today and was able to replicate the problem. After 15 minutes of driving, the problem is gone.Never seems to happen in the afternoon after car has been driven.Transmission fluid is full. Have always changed at the 60k intervals.Fluid is not burnt. Light pink color.
What could possibly be causing this? Is this likely to get worse? How long might I have before the car might become not drivable ? I ask this because I have been considering trading it in for a new car. Now seems to be a good time to buy a 2016 car, since the 2017"s are almost out.
Accent MC (2006-11) :: Clunk Noise When Shifting To Drive?
I own an automatic 2009 Accent. I'm at 95,000KM.
Anyway, the problem does not occur all the time and appears to be entirely random.
When I start my car, on occasion, the car will make a CLUNK sound when shifting from park to reverse or drive. When it does CLUNK, you can feel the car lurch as if something fell out of place. The sound is quite audible, even with the radio on. The sound and lurch is not as pronounced when shifting to reverse. It doesn't seem to happen when going to neutral but is very obvious when going to drive.
Turning off the engine and restarting it seems to resolve the issue. Once I had to restart the engine twice before the clunk stopped.
Attempting to drive when the car does this sound results in increased RPMS. Usually when driving the RPMS sit between 2000 and 3000 but would jump to between 3000 and 4000 when the clunk occurs. Usually, the car will want to crawl forward if I'm not on the brakes but with the clunk, the car need quite some gas to start going forward.
Here's where it gets scary:
On two occasions, while driving on the highway at 100km (65 miles), I'd feel something slip and then suddenly my RPMS jump up by 1000. On both occasions I had to pull over, turn off engine and restart the car and the issue stopped.
Clearly, whatever it is that changes gears is slipping but the fact that it slips while driving just freaks me out.