Ford Transmission :: 1987 E350 - Clank Noise When Shifting In To Drive
Our Rv makes a strange "clank" noise whenever we shift into drive. It is a 87 Ford Econoline 350 with the 460 7.5l. The noise is from the back of the Rv kind of near or in the rear differential. It just started over this past weekend.
We live in Alaska and the mechanics are 3 hours away - do you think we would be able to make it to the mechanics and not have to get a tow? How long we could go without fixing the problem?
Ford 6.7L Power Stroke Diesel :: Transmission Clank / Sometimes Downshift Hard
I have an 2011 6.7 that has a h&s tuner. Lately my transmission seems to be confused about what gear it should be in when I'm driving about 45mph. It will sometime downshift hard. I have a early build 2011 and heard that it could be a solenoid problem with the transmission.
View 8 RepliesFord 6.7L Power Stroke Diesel :: Transmission Clank - Downshift Hard - Solenoid?
I have an 2011 6.7 that has a h&s tuner. Lately my transmission seems to be confused about what gear it should be in when I'm driving about 45mph. It will sometime downshift hard. I have a early build 2011 and heard that it could be a solenoid problem with the transmission.
View 3 RepliesNissan - Pathfinder :: 2002 - Metal Rattling Gears 2 - 4
I recently had the the entire clutch and pressure plate replaced in my car and ever since there has been a sound like metal rattling in gears 2-4. It happens when I have low revs in those gears (particularly going up hills) and seems to go away when I am at high revs (~3k+). The mechanic I initially used says it's nothing but it sounds awful and is making me very nervous. The "Check Engine Soon" light has gone on as well.
View 1 RepliesGolf VI R :: Scraping, Metal On Metal Sound That Diminished A Fair Amount When Brakes Were Warm
I picked my R up three weeks ago tomorrow. I took it in this morning because there has been brake noise from day one. The noise was a scraping, metal on metal sound that diminished a fair amount when the brakes were warm. I only got a very brief conversation with the service agent at the dealership this afternoon, and all he told me is that they had to order in new brakes. I don't know if it's just pads, or calipers or rotors or the whole deal! I'll get the whole scoop tomorrow.
View 5 RepliesGolf/GTI VI :: Screeching / Metal On Metal Noise When Engaging Clutch?
For the past few months, pretty consistently, whenever I engage the clutch from full stop into first gear (it does it when starting in second gear too; and reverse) there is a pretty obnoxious and loud screeching noise that I would liken to a subway/train braking or just metal on metal grinding situation. When I took the car in to Douglas for an oil change and APR Stg 1 flash, they told me it's just the brakes being cold, etc. After driving the car some more, I really doubt that it's the brakes and I can reproduce this regularly by slowly releasing the clutch and get the noise usually just before the gear engages.
That car has just over 16K on the clock and has never been abused. The clutch pedal feels fine and there is no issue shifting into any of the gears other than the noise. No mods other than the APR Stage 1.
Golf IV / Jetta IV :: Transmission Woes / Car Struggles To Change Gears
So I have a 2.0 automatic golf GLS. Its the last of the MK4's but a 2005 model. So this is what's going on. When I drive the car for awhile the transmission (I'm assuming gets hot )& Im at a stop & start from 0 the car struggles to change gears. The rpms go way up into 5k sometimes 6 just to go to second gear, And then so forth. This only happens when I drive around for awhile. My dad just flushed the transmission fluid after my car refused to change gears. It was stuck in a high gear from my assumption & it was always a lot of work for the car to build up speed. What's going on with my tranny? Is it the solenoids? Valve body? TCM? Car is at 104k miles btw
View 8 RepliesGolf IV R32 :: Transmission Making Noise Throughout Lower Gears At Low Speeds
New to the R, and recently the transmission seems to be making some noise throughout lower gears at low speeds, when the clutch is engaged the noise goes away, I figured it was the throwout bearing, but now my transmission now refuses to let me into 2nd gear and also reverse.
I changed the transmission fluid hoping it would eliminate the noise a bit, and saw very small metal shavings in the old fluid. I'm now worried I have a serious transmission issue... Are these signs of major transmission issues or should I be checking linkage? Any common transmission problems with the R I might be experiencing?
Golf V R32 :: Metal On Metal Rattle When Ease Off Brake
I ease off the brake and i hear this rattle coming from my car, like metal on metal. But really high pitched like something got loose or something. Tick tick tick tick. So i give it gas and it goes away. Its only there if i brake and release the brake...So i get home and everything is normal. I go outside and move my car and there's the weird rattle again ...
View 21 RepliesGolf V R32 :: Clunking / Metal On Metal Grinding Sound
This morning on my way to work, pulling into the parking lot around 20mph. I hear a metal on metal grinding noise. (almost to the sound of a muffler dragging on the ground type noise). Then that disappears for a bit, hear a loud metal clunk then some high pitched sound. All within say 30 seconds. Definitely coming from the back, but can not tell from which side.
Things I've checked in the parking lot:
Nothing hanging low, exhaust seems in-tact
It doesn't look like the brake shields behind the rotors are bent or touching
Sounds still happening if on or off brakes , on or off throttle.
It seemed to happen only at lower speeds. Disappeared once I got up to 50mph
Just took it out for a drive, that loud metal clunk happened when I put it into reverse, drove around, no other sounds. I just don't have a warm fuzzy feeling that this will just disappear.
Golf IV / Jetta IV :: 2005 - Transmission Fluid Low - Delay When Shifting In All Gears Intermittently
I have a 2005 2.5 vw jetta.
It has 150,000 miles....the cars been working just fine untill DEC of last year. I had the dealer check the transmission fluid and they said it was low....so they flushed and refilled the transmission oil...they didnt see any metal but that didnt fix the problem.....
Now i have the car not shifting correctly ....theres a delay when shifting in all gears but it is intermittent, sometimes it shifts hard and sometimes you can just baby the throttle and it wont shift as hard.....once on the freeway the car runs fine......but when coming to a stop you can feel the downshifting.....
I figured it has something to do with the valve body....my concern is the dealerships have quoted me 2000$ to replace the valve-body....the cars paid for and was wondering if i should just move onto a different jetta or fix this one?
If i fix the valve body will this jetta have the same issue later? Also i do have the vacuum pump leaking engine oil....not much can this be fixed while doing the valve body job???
Golf IV / Jetta IV :: After Changing Transmission Fluid Hard To Shift Out Of Gears On Cold Starts
So I changed transmission fluid on my 1.8t GLS because I was having difficulty shifting out of gears on cold starts. It seemed to work fine for a few days and now I'm back to square one, it still doesn't want to shift correctly!
View 14 RepliesGolf IV R32 :: Transmission Noise / Louder Whine In Lower Gears And Slight Knock At Idle
My friend has tortured my R32 which he was supposed to buy. I had the motor replaced while i was gone as he blew it , again , dumb. I have been driving it and it has a terrible whine in the tranny I brought it to my mechanic and we took a sample to find metal shaving in my tranny.
He says the tranny is gone but I am lost on how it shifts perfect except the whine. It does this louder in the lower gears and has a slight knock at idle and disappears when I press the clutch in.
I bought a used tranny already to put in. I also if this is the case and the tranny needs replacing I was told to also do the clutch , should I go stock to save money or go with a different clutch and possibly a LW Flywheel , is it really a drastic power difference?
Ford Transmission :: C4 Drops From 3rd Into 2nd When Let Off The Gas
I have a 62 Econoline Pickup with 72' C4 transmission behind a 200 i6 engine. A normal driving speed (shifts up ok - 1st, 2nd, 3rd) when you let off the gas, it down shifts into 2nd gear (shouldn't it coast? ). When you accelerate it shifts back into 3rd. As you decelerate towards a stop it shifts from 2nd to 1st as it should. Supposedly the transmission was rebuilt within the past several years and not many miles since then. I have now was to substantiate this. What's causing this? Or am I looking at a worm out tyranny (time for a rebuild?)?
View 3 RepliesFord Transmission :: Metal In Pan After Rebuild
I was wondering should I find metal in my pan after a rebuild on my AOD? It's been about 4 months since the rebuild and i took it in to have the fluid changed at another shop. Now the unit is doing fine but I did let the shop that did the rebuild know what was found.
View 14 RepliesTiguan :: Metal Rattle Noise From Engine / Transmission
Engine/transmission metal rattle noise. I have a SEL w/auto and I hear a metal rattle noise under light acceleration when it shifts from 6th to 5th, 5th to 4th and usually between 1500 to 2000 RPM. I took it into vw to check and a couple guys drove it and said everything is in normal operating condition. It only has 1700 miles and it has made the noise since I picked it up. I had a GTI before this so I am familiar with the engine but I had a manual.
View 1 RepliesFord Transmission :: Rev Without Engaging If Overdrive Is On - Metal Sludge In Pan
I need to decide what to do with my transmission. I just acquired a 2007 F150 Supercrew 2WD 4.6L truck with 184k miles. While in Drive the automatic transmission (4R75E) runs ok thru 2nd gear and then; if O/D is on it will rev without engaging and if O/D is off it will just stay in 2nd gear.
I was hoping the problem was a broken retainer clip, as are so many others. So I removed the pan, and the valve body. All of the retainer clips seem to be fine, but, there is a lot of metal sludge on the magnet of the pan. See pic.
Should I buy a complete rebuild kit and take the tranny out of the truck? Is it just a problem with the valve body? I need to get the truck going so I can get to work. I am uneducated in the transmission department.
Camry 2012+ :: 2015 SE 4cyl - Transmission Drops To First Gear / Jerk
I have about 600 miles on my new Camry. When I come to a stop at a stop light it seems when the transmission drops to first gear it drop kinda hard or more like a jerk. Is this normal or not?
View 3 RepliesHyundai - Sonata :: Transmission Drops From 4th To 3rd Gear And Locks At Cruising Speed
2000 Hyundai Sonata 2.4 L engine, transmission drops from 4th gear to 3rd gear at cruising speed (65mph) and locks into 3rd gear, I have to stop and turn the key off and start the engine again to reset the A/T what do you think is happening?
View 1 Replies