Ford Super Duty (1999-2016) :: F250 - Replacing Brake Lines
I plan on replacing the brake lines on our 1999 Ford F-250 Super Duty. The rear line blew out right by the hose, on the framerail. All five lines, all five hoses. What size lines? Looks like front two are 3/16", rear two over the axle are 3/16", and the rear line in the frame is 1/4".
We are removing the bed (2013 bed) to make things easier. I am thinking fuel lines and parking brake cable while the bed is off. I have stainless steel hoses from KLM performance and I am also planning on replacing the rear rubber hoses. Obviously I'm using nickel copper line. There shouldn't even be an option for other brake line.
[URL].....
Ford Super Duty (1999-2016) :: 2008 F250 - New Brake Lines While Bypassing ABS?
I have a 08 f250, my abs is giving me nothing but problems, always have, have any of you's ever ran new brake line and by passed the abs?
View 2 RepliesFord Super Duty (1999-2016) :: 2011 F350 - Front Brake Lines Too Short
When on my 2-post lift my front brake lines on my '11 4x4 are pulled TIGHT, like stupid tight. It's also dumb that the soft line points UP 'cause it gets tugged down to a brutally tight 180.
I've got the front lift pads under the control arms, too, but near the very rear of the control arms so the axle isn't even dropped out all the way I don't think.
There's a bracket down near the bottom of the coil springs that could just be sectioned/lengthened, which I think would alleviate my issue. I'll be working on this soon.
What manufacturer builds a vehicle that yanks on the brake lines under full suspension droop? Shouldn't this be on an engineer's final checklist before the vehicle is released? Oh wait, they gave that task to Team TTB and Engineering Group TFI Or maybe they gave it to the same Audi team that designed the Allroad with airbags that can be damaged if you don't "lock" them out before lifting the vehicle......
Ford Super Duty (1999-2016) :: Replacing Parking Brake Cable?
How to replace the parking brake cable from the pedal down to the connector on the frame? We got a 2000 F350 in the shop with a bad cable, and i never did one. And I don't really want to mess this thing up trying to figure out how to change it.
View 6 RepliesFord Super Duty (1999-2016) :: 2008 - After Replacing Fuse Right Rear Brake And Signal Won't Work?
I have a 2008 f-250 2 days ago all light stopped work except the head lights found a blown fuse replaced with a new fuse and now all the lights work except the right rear brake and signal but the running light works so i know its getting power looked at the wireing and it all looked good to me oh ya pulled my trailer in and same thing everything worked but the right brake and signal ....
View 4 RepliesFord Super Duty (1999-2016) :: Removing Hub Vacuum Lines
I have manual hubs on my truck. Can I pull those vacuum lines and plug the holes?
View 9 RepliesFord Super Duty (1999-2016) :: Trans Cooler Lines In Radiator
I have Russell fittings and hose coming to hook up my new 6.0 cooler into my 5.4 powered truck. Have a question on the fittings on the bottom of the radiator for the cooler lines, first what is the 3/8" line called? Is it a double flare or what? And second question the female end that's into the plastic tank with the hex head does that unscrew or is it made into the tank? Trying to figure this out so I can overnight two adapters so I can get rid of the fugly hard line completely and use Russell braided line throughout my install
View 14 RepliesFord Super Duty (1999-2016) :: Removal Of Vacuum Lines For ESOF?
Truck has been neglected for a while so this upgrade/repair I installed Powerstop brake rotor, caliper, bracket and pads. New Timkin wheel bearing, Moog U-Joints, and new inner/outer axle seals. Also replaced all the brake hoses and the remaining original rusty brake lines. About a month before I replaced the failed Auto/Manual vacuum operated locking hubs with Mile Marker units, which do not need the vacuum line, the drivers side was missing. and was letting water into the wheel bearing. So I decided to plug them and remove the vacuum lines from under the hood as well.
If there is interest I can get pictures of the vacuum lines, and what I changed under the hood. That was pretty self explanatory.
Could not find a google search for the thread size of the vacuum nipple in the knuckle. It is a 3/8"-24 fine thread.
[URL]
Ford Super Duty (1999-2016) :: 4x4 - Vacuum Lines Starting To Look Brittle
I don't have any leaks at the moment, but after inspecting my vacuum lines they're starting to look brittle and I want to replace them proactively. Is there a kit to do this or should I just cut a section off and take it in to an auto parts store to match the size, and buy it by the foot?
View 2 RepliesFord Super Duty (1999-2016) :: Thin Red Lines On Radio Display
Out of nowhere my radio started to display a bunch of horizontal thin red lines across the screen on my 15' 250 xlt. Picture is just to show the type of radio I have.
View 2 RepliesFord Super Duty (1999-2016) :: 2000 F250 - Leak From Oil Pan Gasket And Coolant Lines
I have a leak from the oil pan gasket and oil coolant lines. From the research I have done, it looks like I have to lift the motor to change the oil pan gasket. Any way to get this done without lifting the motor??? 2000 f250 5.4 2wd....
View 4 RepliesFord Super Duty (1999-2016) :: 2013 F250 - Vacuum Lines For Auto Locking Hubs Frozen
I have a 2013 F250 which has both the Manual and auto locking hub feature. I tried to plow my driveway this morning and after making one pass I put the truck in reverse and could not back up my steep driveway. The truck is showing locked in 4x4 on the dash, the 4x4 control is in high lock but the front wheels will not turn. It has been very cold here lately (-30) and I'm wondering if the vacuum lines for the auto locking hubs have frozen. I have switched the control out of 4x4 and back in several times, and it does lock in again, but as soon as I put the truck into reverse, they unlock again. The hubs are covered with ice and snow right now so I have not yet tried to manually lock them.
View 14 RepliesFord Super Duty (1999-2016) :: Oil Gauge Drop To Zero And Light Came On
I have a 2000 f250 5.6 v8 with around 104k miles. yesterday I noticed the oil gauge drop to zero and the light came on. then, it went back up to normal. after a few minutes it did it again. I parked in the driveway and checked the oil. it was gone! dipstick was dry. there are no leaks as far as I can tell and it hasn't been burning oil. it was running fine and I was surprised to even see the dash light come on. What could be the cause of this?
View 14 RepliesFord Super Duty (1999-2016) :: 2008 - Replacing Box On F350?
Long story short, I need to replace the box on my 2008 F350. Do the boxes from '14-'15 models line up? I know the fuel door is different, but is the rest the same?
View 4 RepliesFord Super Duty (1999-2016) :: Replacing Steering Gear Box?
My father's truck is still having power steering issues. After replacing the power steering pump I went from no power steering to power steering when I turn right but not when I turn left. So now I'm going to replace the Steering Gear Box. Where I can get step by step instructions on the best way to get to the gear box and how to get it out?
View 1 RepliesFord Super Duty (1999-2016) :: Drop Tab Broken On Driver Door Panel
How to fix a broken drop tab on my 06 super duty driver door panel.
View 3 RepliesFord Super Duty (1999-2016) :: 2012 F250 XLT Stalling - Idle Drop To 500
I just purchased a 2012 F250 XLT with the 6.2. It has 38,000 miles on it. Yesterday I noticed, when coming to a stop, the idle will sometimes drop below 500. The engine will stumble a little, then the RPM will jump up to 1,000. Twice it has stalled on me. When it stalls, the engine will restart just fine. No codes in the computer or warning lights on the dash.
I will be bringing it back to carmax, as it is under their 30 day warranty still. Hopefully they will be able to figure out something. I am thinking either the TB needs to be cleaned, or there is an issue with the canister purge valve. I saw the TSB for the CPV but it doesn't cover my truck.
Ford Super Duty (1999-2016) :: O/D Button Working Inverted - RPMs Drop
Push the o/d button to turn off, light on shifter comes on as off...and the rpms drop.
Push the button again (turning O/D on) and the rpms increase. It appears its working 180 degrees opposite of proper.
Example to clarify...going down hill at speed, push the O/D off button and as before working correctly the rpms would increase allowing the engine to aid in some braking.
That is now 180 degrees opposite. Push that button while descending and the rpms drop like it got thrown into neutral.
Ford Super Duty (1999-2016) :: Fuel Gauge Will Drop All The Way To Empty Then Go To Almost Full
I have an 03 f350 4x4 cc long bed and I seem to be having a problem with my fuel gauge. It doesn't show the true amount of what's in the tank and because of that I have run out of fuel a few times.
sometimes when I'm driving the light will come on and the gauge will drop all the way to empty then a little later it will go to almost full even with only putting 10 gals in the tank.
Any fix for this or do I need to replace the sending unit?