Ford Super Duty (1999-2016) :: Wheels Rubbing The Leaf Springs
This is my dads f250 build date of 9/03. I know these wheels are not the factory xl wheels. I also think they changed something with the wheel back spacing somewhere around this time. He is running 285/70/17 bfgs and is rubbing the leaf springs pretty good. He ran this same size on his previous 02 model with no rubbing. Can he get away with 1/4 spacers? What years these wheels are from? And the backspacing differences, if any. His 02 had the chrome large bullet hole style wheels.
View 5 RepliesFord Super Duty (1999-2016) :: Spacing On Rear Leaf Springs?
I have a 99 SD 250 diesel, I also have a broken rear leaf spring. My truck has a 3 1/2 in. block between axle and leaf. My question is this. Can I remove the block and install 4" lift leaf springs without messing up my pinion angle? The blocks look square. But someone toldme once they are made to a specific angle for rotating pinion for better u joint alignment. Sounds like it could be true.
View 9 RepliesFord Super Duty (1999-2016) :: Adding OEM Rear Overload Springs?
I would like to add rear overload leaves to my 2016 F250 that for some reason I didn't order with the camper prep package. From what my internet research tells me I will need to add the frame tabs and rubber bumpers, the overload leaves themselves, and of course longer U bolts.
My question is, in all of the pictures I can find, there in an intermediate spacer block between the regular leaf pack and the overload leaf. I can find a part number for this block ( 2C3Z-5594-AA ) only for 2002-2007 trucks. The parts diagrams I've seen online at various Ford sites don't list a part number for this block on current model trucks. Most just give a single part number for the whole leaf pack.
For 2014-2016 F250 with the camper package, or an F350 know what part numbers I might be looking for? Do the newer model year trucks still use an intermediate spacer block? Any chance someone with one of the aforementioned vehicles can post a picture of what the overload leaf setup looks like on a new(er) truck?
I would assume if you snap an overload leaf you can get a replacement from Ford, so why can't I find a part number for them either? I'm pretty sure I will have overloads built at a local spring shop anyway, but at least want to make sure I'm matching the correct and current factory setup.
Ford Super Duty (1999-2016) :: 2013 F250 - Changing Front Springs?
I just bought a used 2013 F-250 4x4 and it came with the snow plow pkg. heavy duty front springs. I love the truck, but won't be plowing with it, and I don't need the rough ride (and don't like the look of the front end higher than the rear)
How hard is it to swap out the front coil springs and replace them with the "regular" ones?
Ford Super Duty (1999-2016) :: 2000 F250 - Clunk In Front / Leaf Springs Bad?
As the title says are my front leaf springs bad? I got this truck 2 years ago and replaced all the ball joints, shocks, sway bar links,front hubs, rotors and brakes along with all the seals. I have a clunk in the front and I can't figure out what it's coming from. Could my leaf springs be clacking together? Truck
is a 2000 F250 SD v10.....
Driverside front
Rear spring
Ford Super Duty (1999-2016) :: 2000 F350 - Softer Ride On Leaf Springs
I have a 2000 F350 that was once a work horse. Its now just my daily. The leaf springs in the rear have 2 broken on each on and the front need to be replaced due to 344K miles on them too. My question is how do I soften up my ride on leaf springs though? Theres a local shop that will do the work, but my rears have 7 leafs / front 2. It used to tow daily but I dont tow anything with it. could I go to 5 in the rear to soften it?
View 14 RepliesFord Super Duty (1999-2016) :: Getting Front Brake Pads Into Caliper - Springs Kept Popping Out
03 f350 4x4. New front calipers and pads.
Wondering if there's a 'trick' to getting the front brake pads into the caliper . Those damn springs kept popping out. I'd get three of the four ends into place in the pad holes then one would pop out while I'm trying to get the fourth in.
After about a hour of trying every different way that I could think of, another set of hands came by and with four hands holding things in place, it finally did the trick.
Ford Super Duty (1999-2016) :: Replacing Rear Block - Axle Won't Separate From Leaf Springs?
I decided to go ahead and do a rear block replacement. I'm going to install the Ready lift 4 inch blocks.
I have both u bolts and nuts off of both sides. Rear stabilizer bar disconnected and both shocks disconnected. However, when I raise the rear of the truck, the axle raises as well. What could be holding it on still? I noticed there's a nut in the middle of the leaf springs. Do I take that nut off? I just don't know what could be keeping it from separating.
Ford Super Duty (1999-2016) :: 2004 F250 - Tire Rubbing On Plastic And Front Leaf Springs?
I just put some toyo at2 295.75.16. On my 04 250. And I've got some rubbing on the plastic and front leaf springs. If a 2.5 " spring left will take care of the rubbing or will I need wheel spacers.
View 3 RepliesFord Super Duty (1999-2016) :: 2003 F250 - Front Tires Leaf Springs Rubbing Even On Slight Tight Turn
I got an 03 f250 with a 10 inch lift on 40x14.50 tires on 20x10 fuel hostage wheels. They rub my springs pretty bad when trying to make even the slightest kind of tight turn and the sound they make when they rub is even worse than them actually rubbing. My question is should i stay with this tire and wheel setup and try to get some 6061 billet aluminum 2 inch spacers? (I'm not sure about going that route though because of what i heard about spacers) or go down to some 38s with a 20x14 wheel that hopefully would push the tire away from the hub like spacers would do. I'm leaning more towards going to 38s because of the rubbing and also because I feel they might look better on the 10 inch lift rather than the 40s but dont know whats the best thing to do.
View 12 RepliesFord Super Duty (1999-2016) :: Seat Belt Squeaking?
The top mounting point on my seatbelt is squeaking like crazy. The guide for the seat belt is rubbing on the piece it bolts to because the plastic tabs on the plastic cover have worn out. Where to get a new one of these? Its just the plastic triangle shaped cover that goes over the seatbelt mount.
View 1 RepliesFord Super Duty (1999-2016) :: Brake Pads Squeaking A Lot
I recently replaced all of my brake pads with yellow stuff and they seem to be squeaking a lot. I also noticed when I am driving and I stop and let off of the brakes they don't release immediately so could it be this is the cause of the squeaks or do these brake pads just squeak like crazy? I read somewhere it could possibly be the brake lines but I don't see how this could be the cause for so much squeaking.
My truck is a 2011 F 250 diesel crew cab....
Ford Super Duty (1999-2016) :: 2003 F250 - Doors Squeaking
I posted a reply her a couple of weeks ago on how I fixed my '03 SD's squeaky doors. I went to AutoZone and bought 32 feet of 5/8 inch self-adhesive rubber (not foam) weatherstripping and mounted it around the outside edges of both doors, starting at the top. Presto - squeaks are gone, there are no more drafts and road noise is reduced a little. (I may remove the stripping I put on the side edges of the doors because I think the culprit is actually the rigid polyethylene bumper strip they've mounted on the upper door jam).
View 2 RepliesFord Super Duty (1999-2016) :: 2008 - Loud Squeaking Noise While Turning
I have an '08 F250 w/ a 6.4. A couple days ago I started getting a loud squeaking when I turn to the right. It only does it under speed, almost like it needs the weight transfer to make the sound. In addition it's only when I turn at a like 45 deg angle, I can turn less or more to make it stop. But it has gotten louder and louder.
View 1 RepliesFord Super Duty (1999-2016) :: Creaking And Squeaking Whenever Start / Stop Or Turn
So, don't know if this is normal or not, but after lifting the rig, I'm experiencing a whole lot of these types of sounds from the leafs or the springs or whatever, whenever I start, stop, or turn. Is there an easy way to silence the noise? I've tried all sorts of lubricants on the leafs and springs, but I only get (at best) a week of muted noises. While it's only an inconvenience, it sure would be nice to have the rig be quiet again.
View 6 RepliesFord Super Duty (1999-2016) :: Steering Wheel Squeaking Sound Inside The Cab
Is there a way to grease the steering shaft or whatever is making the squeaking sound inside the cab when I turn the wheel? It's a 2001 F250 CCSB Lariat and it drives me crazy hearing sounds I shouldn't be hearing. This is certainly not coming from outside the cab but rather in the steering shaft within the cab somewhere. How I can lube that up?
View 1 RepliesFord Super Duty (1999-2016) :: 2003 F250 - Squeaking Under The Hood - AC Not Working At All
03 F250. 5.4 2v ... I purchased it a month ago.
Squeak under the hood. It appeared to squeak in relation to the movement of the tensioner......simple right? Replaced Tensioner and Belt..... Still squeaking.
AC not working at all. Compressor never kicking on.....replaced compressor, accumulator, and orifice tube. AC works now!.....squeak still there....
Notice fan wobbling.....shut truck off.....fan clutch shot... replaced....STILL SQUEAKING!!
Obvious answer....sound still on that side of the engine....Idler pulley....I just replaced it and the dang truck is still squeaking!!!!!!!!!
All that's left is the harmonic balancer, alternator, and power steering pump.......What could it be?
Ford Super Duty (1999-2016) :: Squeaking Sound Coming From Under Hood In Reverse But Not Moving
So today I was backing up my 11000# fifth wheel at the campground when at 1500-2000 rpm I hear this awful shrieking sound coming from under the hood. I heard it the whole time while backing up and under a load. I never heard it once going forward. So when I get home I put it in reverse and hold the brakes and again I hear this shrieking sound coming from under the hood I get it up to 1500 rpms or so not moving just holding it and the more throttle i apply the louder the shrieking gets.
Now remember the truck is not moving its just spooled up, holding the brakes. I think that maybe something is wrong with the turbo, but I dont want to jump to conclusions. This truck is a 2001 F350 SRW CC LB 7.3 161,000 2 owner miles, 4 inch turbo back FLO PRO Straight pipe, and gauges everything else stock. What is moving that is making this horrible sound.
Ford Super Duty (1999-2016) :: Squeaking Noise Coming From Front Differential Pinion
we've had a bunch of snow this week and I've been driving around with my hubs locked in. today I noticed when I was slowing down to pull into my driveway I could hear a slight squeaking sound(sounded like a squeaky belt) coming from the front.
I verified it was coming from underneath the truck behind the engine compartment so I unlocked the hubs and went for a drive, the sound was gone. I crawled underneath and turned the front driveshaft by hand and I could hear a slight rubbing sound at the back of the pinion. The bearing doesn't have any play in and there are no leaks. What is going on? Could the bearing be starting to fail or could the rubber seal around the pinion have some grit in it causing the noise?