Ford Super Duty (1999-2016) :: 2008 F350 - Adding OEM Fog Lights?
Have an 08 f350 xl and was looking to put oem foglights into the bumper where mine has the block out 's, guess what I am asking is if the wiring is already there as it was on a different vehicle I owned ,basically it was a plug and play ,have only had the truck for a week and with the hours I'm working I really haven't had a chance to crawl under and look for the wiring.
View 3 RepliesFord Super Duty (1999-2016) :: 2007 F350 - Upfitter Switch Not Working
I have the ford upfitter switches in my 07 f350 and i had two flashing lights wired to switch 4 (10 amps) for snow plowing. The lights were LED and shouldn't have drawn much power but suddenly the lights stopped working because thers no power going to the fourth switch. They work on all the other switches. What could be the problem?
View 5 RepliesFord Super Duty (1999-2016) :: 2014 F350 - Upfitter Switch Wire Location
I am putting work lights and LED warning lights on the back rack of the 2014 F350 diesel in work. Where are the wires for the upfitter switches, and are they prewired into the fuse box, or do i have to hook them up?
View 7 RepliesFord Super Duty (1999-2016) :: 2006 F350 - Hooking Up High Idle With Upfitter Switches
I would like to do the high idle mod with my 2006 F-350 using the upfitter switches. I've seen a couple of threads about this but they are not real clear to me and don't mention the 2006.
View 14 RepliesFord Super Duty (1999-2016) :: F350 - Adding Second Backup Camera?
I would like to add a second backup camera to my 2016 F-350 Super Duty to assist when hooking up to my fifth wheel. It is a Crew Cab with the Factory Tonneau Cover so my view of the hitch is blocked. I would like to add the third brake light high mount camera and be able to toggle between my OEM/Tailgate Camera and the High Mount. I have found a couple that claim they will work but both require tapping into the main connector on the back of the display, but not quite sure how to open it up. Accessing the connector is not a problem, just getting it apart without breaking it is the question. The "Lockpick" system has not been tested/certified for the 2016 model.
View 3 RepliesFord Super Duty (1999-2016) :: F350 - Adding Rearview Camera After Truck Already Built
I am looking at a 2016 F350 that I found on a local dealers lot. It has most of the options I wanted MINUS the Rearview Camera.
It is an XLT Reg cab so I do not have the display screen (When built with this option installed, the display would be in the rear view mirror, not the display screen.)
So I am wondering if it is even possible to add this option after the truck was already built and have the dealer install it? Or is it one of those options that would have to be done before build/assembly?
Ford Super Duty (1999-2016) :: 2008 - Adding A Remote Trans Filter?
I used to own a fleet of school buses and I had remote trans filter on all of them. I'd change the filter about every 10K and felt like it really extended my trans life on Allisons. I wanted to put on my SD, so, I had a spare filter block with a 20psi bypass valve, and I used it. Worked out real well mounted to the radiator support, up front--easy access. uses a NAPA 1268 filter. In the picture it looks like the hoses are real close to the AC condenser, but in real life, the are three inches from it.
View 2 RepliesFord Super Duty (1999-2016) :: Upfitter Wiring Question
I currently have Aux2 hooked up to my on-board compressor and it works like a charm...so I'd like to think I know how the wiring works for the upfitters haha.
This weekend I installed an electronic solenoid valve for my slip-tank so I can fuel up on the go. The valve is 110V AC and had two wiring leads of the same color so I assumed either/or could be used for power and the other for ground. I wired it all up running a power lead from Aux3 back to the valve and grounded the other wire to the body. To my surprise...no power! Can a 110V AC valve not be used in this application or is my wiring simply messed up/not making contact?
Ford Super Duty (1999-2016) :: No Power From Upfitter Switch Wires
I've checked the fuses, the lights are on on the switches, but I have no power at the wires under the hood. I'm adding lights and would like to use those switches..
View 2 RepliesFord Super Duty (1999-2016) :: Upfitter Switches Relay Install
I want to install a set of upfitter switches but my truck didn't come with them...so I bought the switches and the relay/wire harness as well...I cannot find any good information on where to mount the relay and where an extra plug on that harness goes too. I have found the wires that attach and go through the firewall but I am not sure where the rest of this mess goes...my truck did not come with the wire harness already installed...
View 4 RepliesFord Super Duty (1999-2016) :: 2013 - Removal Of Upfitter Dash?
Recently purchased a 2013 F350 w/upfitters. Figured Ford would have made access to the stubs easier by now (previous was an 05 6.0 ) and of course not. A bit more challenging. What parts of the dash do I attack and how. As the dealer is willing to charge only 40 bucks to connect any wires I run to the vicinity, I figure there's a slam dunk sequence for access.
View 7 RepliesFord Super Duty (1999-2016) :: Upfitter Switch For Flashing Clearance Lights
Sure would be convenient when hauling the 5er.
View 14 RepliesFord Super Duty (1999-2016) :: 2015 F250 - Installation Of Upfitter Switches
I just got a 15 f250 with the console and nav system but it didn't come with the upfitter switches.
I picked these up and got a copy of the .pdf for the installation, but I'm finding it hard to follow for where the relay and box should install. I ran the wire up to the upfitter switch location and can even find a nice spot to connect the grounding wire.
I can't for the life of me figure out where the box installs and where the wiring harness taps into the main harness. Need a photo of where your box is installed and where it taps into the main harness?
Ford Super Duty (1999-2016) :: 2011 - Upfitter Switches And Fog Lights Installation
How hard is it to install the upfitter switches and the fog lights? Is it all plug and play?
View 4 RepliesFord Super Duty (1999-2016) :: 2010 - Wiring For Power Dash Camera Using The Upfitter Switches?
I have a 2010 F250 and wanted to power a dash camera using the upfitter switches. I purchased a 12volt wire, but am unsure on where to wire it so that it will only power up when the ignition is on..
View 7 RepliesFord Super Duty (1999-2016) :: 2008 - Replacing Box On F350?
Long story short, I need to replace the box on my 2008 F350. Do the boxes from '14-'15 models line up? I know the fuel door is different, but is the rest the same?
View 4 RepliesFord Super Duty (1999-2016) :: 2008 F350 - Cab Over Lights Are Out
I have an 08 f350, and my cab over lights are out...I've checked net for issues and they all point in different directions... Running and towing lights are fine, just cab over lights are out...is there a fuse somewhere I cant find? could one burned bulb be out and it effects all?
View 3 RepliesFord Super Duty (1999-2016) :: 2008 F350 - Fog Light Replacement
I have a 08 F350 CC with the factory fog lights. One of them has burnt out. Do I replace just the bulb or the entire unit? Is there a part number?
View 1 RepliesFord Super Duty (1999-2016) :: 2008 F350 - Fan Switch Not Working
On my 2008 SD F350 my number 1&2 settings on the fan don't work. Only 3&4. What's the problem? How do i fix it?
View 8 Replies