Ford Super Duty (1999-2016) :: 2006 F250 - Error Code P0470 / No Boost
2006 F-250 6.0... I'm getting a P0470 error code and no boost, The unison ring is free and clear, the Turbo will not create boost till about 2000 RPM on the road. If I unplug the VGT there is no change in the turbo.
When the vehicle is started there is no tone change in the exhaust. This just started after I replaced a dummy plug in the oil rail. I checked all the connectors as well. I cleaned the EBP and tube.
Ford Super Duty (1999-2016) :: 2006 F250 - How To Add Fog Lamps
Looking for a tutorial on how to add the fog lamps to an 06 f250 superduty? I have an xlt with the fog lamp switch just need to install the after market fog lamps they are leds.
View 4 RepliesFord Super Duty (1999-2016) :: 2006 Diesel F250 - Hot Air Only Through Vents
Last week I flipped the fan switch on and noticed that only hot air was coming from the vents, even with the control set to AC. The vent control switch seems to work fine directing the air but only hot air. The temperature control does not work. The exception is when I put it on max AC I get cold air. I can't be the only one.
View 4 RepliesFord Super Duty (1999-2016) :: 2006 F250 - AC Changes From Vent To Defrost On It Own
2006 F250 5.4 - While driving ac changes from vent to defrost on it own..let off gas and it will change back to vent. I replaced vacuum can under hood.. no luck.....
View 1 RepliesFord Super Duty (1999-2016) :: 2006 F250 5.4L V8 Hisses After Shut Down
I bought this truck used and it is my first F-250. I took it to the shop last week and they found a few things and a cracked radiator was one. They replaced the radiator with a new one. I heard the sound before the new radiator and I still hear it now. The coolant level is not dropping and the engine is not over heating (also no fluid on the ground). Is this a normal cool down sound?
View 6 RepliesFord Super Duty (1999-2016) :: 2006 F250 - A/C Has A Blend Of Defrost
I know there is a motor or switch that I can remember the name of that is in the dash somewhere that controls the Defrost and regular cabin flow. I am not good with A/C, and was wondering, what is the name of it, and is it something I can get to behind the glove box or is it very complicated?
View 7 RepliesFord Super Duty (1999-2016) :: 2006 F250 Locking Into Low Range
I have an 06 F-250. I have had this truck since Oct 2013 and had never use 4 wheel drive here in southern Alabama, so my question is i lock my hubs, turn my selector to 4 high and it works. Now selecting to 4 low and I get nothing.
View 9 RepliesFord Super Duty (1999-2016) :: 2006 F250 XLT - Vibration In The Floor At 70 MPH
I am new to the Superduty and the Diesel world. I just purchased a used 2006 F250 SD XLT with 79K miles on it. This truck has a brand new 6 inch rancho lift. I just bought brand new 35x12.50x18 toyo open country AT tires and new 18 inch rims. I have the steering box replaced, new brakes all the way around, front end alignment and the Turbo pedestal secured.
However, I am still getting a vibration in the floor going down the highway when i hit 70MPH under acceleration? Once I let off the gas the noise goes away.
Ford Super Duty (1999-2016) :: 2006 F250 - No Heat At Idle
Having problems with no heat at idle or low heat in the cab. I just bought this truck a couple weeks ago and have a limited warranty on it. The truck makes no heat at idle. I start it and let it just run, engine temp gauge goes up to normal operating temp in 15 min or so, still nothing from the vents but cold air. If I drive it I get a "little" heat, at idle, cold air again. I believe the thermostat is working because like I said, engine temp stays right in the middle.
Brought it to local ford dealer, their diagnosis was heat core clogged and needed to be flushed, had that done. truck has been running 40 minutes in the driveway now, engine temps nice and warm, no heat. What could be the issue? I took a picture of what I believe are the lines running to the heater core, just barely warm to the touch, not hot by any means. It looks like there is a vacuum actuator on the line running in but there is no hose attached to it, what this it, should it have a line running to it?
Ford Super Duty (1999-2016) :: 2006 F250 5.4 - Engine Misfires?
Ok I rebuilt the engine in my f250 5.4 3v. Timing set cam phasers and oil control valves are new. The problem I'm having that just started after 5k miles on a new engine is all of a sudden i will start getting misfires 1st time it happened said #6 i changed coil same problem came back this time said multiple misfires now I'm just getting #4. When the misfires happen if i hold throttle where it is it will misfire as long as i hold it there if I let off gas then apply right back misfires stop for several miles then will happen again. I have changed fuel pump and fuel pump driver module same problem exist.
View 3 RepliesFord Super Duty (1999-2016) :: 2006 F250 - Stuck In Park?
I have a 2006 F250 V10 that has this issue most of the time but not all the time. Start her up, foot on brake and the shifter wont move. I use the bypass method to get her moving when this happens. It seems to be doing it more often lately. Also I recently has a cruise control issue. Hit the brake to shut it off and it doesn't stop it! Not sure if the 2 are related. The internet said I need to replace the switch on the master cylinder to fix the cruise control. I got lots of different stories on the park issue.
View 2 RepliesFord Super Duty (1999-2016) :: 2006 F250 - Transmission Line Replacement?
I'm having trouble disconnecting the transmission lines to replace them. I can't get them off. I have the tool. Can I replace the fittings in the radiator?.
View 3 RepliesFord Super Duty (1999-2016) :: 2006 F250 - Fan Clutch Roaring On Acceleration
I have a 06 6.0 with 340000 miles on it believe it or not still pulls great. The problem is my clutch fan keeps roaring when I press the gas it's extremely loud all my gauges are fine so the truck isn't overheating? Also not a bad fan clutch I wasted 300 bucks on that and it's still doing the same thing.
View 6 RepliesFord Super Duty (1999-2016) :: 2006 F250 - Clunk When Come To A Complete Stop
Have an 06 F250. When I slow down to make a turn then accelerate it's like the drive shaft spins half a turn before it catches. Been doing it for awhile now. Now I'm get a clunk when I come to a complete stop. When you stop then truck settles there is a little clunk. Does this sound like the slip yoke problem?
View 1 RepliesFord Super Duty (1999-2016) :: 2006 F250 - Speedometer Reading Fast
Got a weird one today. Everything was fine all day. Got the old girl smogged this afternoon and made one more quick stop. Got back on the freeway and up to speed and looked down. Speedo said I was 90? Yeah right. I was going with the flow.
So I plugged in my bluetooth ALDL dongle and fired up OBD Link. Well, OBD Link showed normal and accurate speeds. As did a second app on my phone for giving speed. So my VSS must be working correctly.
So my speedo is showing about 25 over actual. When the ignition if off the needle sits between 20 and 25. so did my speedo take a dump? Is there anything else I might try to see if it auto-calibrates?
Ford Super Duty (1999-2016) :: 2006 F250 - Hard Shuddering When Braking
When braking the truck shakes terribly, enough to toss a drink out of the cup holder almost. Sometimes there is a slight feeling in the peddle but not always. The shudder feels like it is timed with each revolution of the wheels.
It developed from a perfectly stopping truck over the course of maybe a month. I don't drive the truck that much either.
Things I have checked:
1, all u-joints, they all look and feel good, no play or slop in them
2, air pressure in all tires, even rotated them, no effect
3, brakes-front and back all looked good but I went ahead and replaced front pads and rotors, cleaned caliper pins, zero effect.
4, shudder exists whether in gear and slowing or in neutral, 2wd and 4wd
What the heck else is there to check? My first thought was, front brakes/warped rotors, but after pulling them apart there was so much life left on the rotors and pads and replacing all that with new did nothing! Could bad back brakes cause this much of a shudder? They look fine as well.
Ford Super Duty (1999-2016) :: 2006 F250 - Air Conditioner Compressor Not Coming On
Got a 06 F250 V8 Gas. Went to turn AC on the other week & got warm air out vents. Put 1 can of 134 in & the gauge on the "kit" said it was in the green. It was working last summer. You can turn the compressor "face" so it's not locked up, but it's not kicking in. Swapped the replay with another one & the 10a fuse in the fusebox under the steering wheel is good. Is that the only ones? I find it hard to believe that it's something serious. We did change the belt a few weeks ago & I was hoping that we had pulled a wire loose. The vacuum line that plugs into the heater hoses is plugged in.
View 14 RepliesFord Super Duty (1999-2016) :: 2006 F250 - CEL And Error Code For TPS Occasionally Comes On
Engine light and error code for tps occasionally comes on , then stays off a while. parts store said it was ok (shows full range) , but ford has an update for computer to fix. engine is v10 and parts store erased code and it hasnt come back. the only indication that something was wrong is the light coming on and once on the interstate at high speed , then the off ramp slow down, the engine seemed to want to stall as if engine not matching actual speed for a few seconds, then it was ok again. I was out of town and the mechanic that looked at it told me to go to Ford for an update. He tested the tps and said it was ok.
View 2 RepliesFord Super Duty (1999-2016) :: 2006 F250 - High Beams Will Not Shut Off
I have a 2006 F-250 Super Duty (6 liter diesel). The high beams stay on unless I pull the fuse (fuse 30). It doesn't matter what position the headlight switch is in. It is like the high beam flash on the multi-function switch is stuck. It feels fine, but high beams stay on regardless of position, even with the truck off. The low beams (if in low beam when the truck is shut off) do go out as do the running lights after 15 or so seconds (normal) it's just the high beams. Also the high beam indicator light is on all the time (until I pull the fuse) and the fog lights will not come on until I pull the fuse. Should I replace the multifunction switch or look elsewhere?
View 10 Replies