Ford - Fusion :: 2007 - Brakes Are Squishy After The Car Is Jarred
My daughter has a 2007 Ford Fusion with brake issues. Brakes are squishy after the car is "jarred" (i.e. hits a bump or pothole). The brakes go almost all the way to the floor and return to normal after a driving for a while. All the work described below has been performed by Ford dealers (at great expense): Master Cylinder replaced, all brake pads replaced. Brakes have been bled numerous times. When we bring it in they bleed it and say it's fine, next "bump" and the problem comes back. We're really at our wits end, the car is, at many times, scary to drive.
View 12 RepliesHonda - Odyssey :: 2007 - Brakes Are Soft And Have To Press Hard?
I have a 2007 Odyssey. Honda already recalled it once for brake issues. It has 44000 miles and we already changed brake pads once. Now again beakes are filling soft and have to press hard. what should I do?
View 3 RepliesFord Brakes/Suspension :: Brakes Does Not Feel Soft / Truck Is Hard To Stop
I have this truck (in signature below) that I have not driven for ~3 years. As I am starting to drive it I am noticing I need to put A LOT of pressure on my brake pedal to get the brakes to work. They stop the truck and the pedal doesn't feel soft as if there is air in the line but it feels as if I apply a lot of pressure and there isn't a lot of grab.
While it might be possible, I don't think I have any type of glaze or coating on my brakes that would cause this. 95% of those 3 years, the truck was inside.
I wonder if it feels as if the truck is hard to stop because of the additional power I have coming from this new motor?
Is there any type of part I can replace in the brake booster to adjust the pedal? Or brake booster. Maybe that is going bad?
Ford Brakes/Suspension :: After Pressing Pedal Resistance Became Really Soft And Brakes Very Sensitive
I have a 2004 Ford Expedition and today on the freeway I had to step on the brakes pretty hard to avoid an accident. After pressing, the pedal resistance became really soft and the brakes worked, but were very sensitive (a lot of pedal movement to brake). I had this happen some time ago and I did a complete system flush and no problems since then, but it has to do with how hard I hit the brakes. What could be wrong????? BTW - I never noticed the anti-lock brake pedal pulse at all during this event. I'm not even sure it is working at this point. No dash lights to indicate an error of any sort.
View 3 RepliesFord - Fusion :: 2011 - Brakes Squealing - Rotors Scoring?
2011 Ford Fusion Hybrid .. Since purchasing my vehicle in January 2011, I have had continuing problems with squealing brakes and my rotors scoring. They have been replaced along with the linings, pads, etc and less than three months later they are back in the same condition. I drive 140 highway miles roundtrip daily - at least half of that in stop-n-go commute traffic. I never experienced this over the 11 years I owned my 1999 Ford Explorer under the same driving conditions. Have this issue with the hybrid?
View 3 RepliesFord - Fusion :: 2007 - Low Coolant Temperature OBD Code
I have an '07 Ford Fusion with 94,000 miles. The check engine light came on a couple of days ago, so I took it to a shop to have them pull the codes on it. The code that came up said the coolant was not reaching the proper temperature, and the mechanic told me the thermostat should probably be replaced.Two questions:
1. Should I go ahead and get it done, or wait and see if the check engine light comes back on? I usually only drive the vehicle about 10 miles a day, and it's all city driving.
2. What kind of cost should I be looking at? He said it would be a system flush, replacing the coolant and thermostat (which they would get from a dealer).
Ford - Taurus :: Brakes Bled - Still Soft Pedal - No Leak
I changed front rotors and bled brakes. They were hard for a few days and went soft. No leak in fluid (MC reservoir is still full). No leak in fluid near any wheel. Could I need to bench bleed the master cylinder?
View 12 RepliesFord F-150 - 1997-2003 :: Brakes Hard When Motor Off Soft When On
My son just bought a 97 F150 with the back brakes blocked off. The front brakes had about full pedal when the was on. We changed the front calipers and brake pads. Bled them came back with great brakes (with back brakes blocked).
Then we found out the back calipers was none so we bought all new parts for both back brakes, found some leaks in the rear lines fixed them. Now we bled the brakes with the motor off till no air came out. Solid pedal. Then turned on the motor and the pedal goes down 3/4 of the way now easy.
Stops on snow good no tire sliding. Turn off the motor has solid pedal again.
Ford Fusion :: 2007 AWD - Strange Humming Sound While Driving
I have a 2007 Ford Fusion AWD and noticed a humming noise as I was driving last night. It started when I got near 50mph and seemed to stop or get so quiet as to be not noticeable when I got to 40 or put the breaks on. What this might be?
View 2 RepliesFord 7.3L Power Stroke (1999-2003) :: Brakes Sometimes Soft Other Times Firm
So the other day I had someone change lanes and slam on the binders right in front of me which caused me to slam on mine. Luckily no one got hit. Now my brakes feel different. Sometimes the pedal feels nice a firm other times it pushes in 2-3" before starting to brake. The fluid level has not changed in the resevoir and the hydroboost appears to be working fine. The power steering is still operating as before. I have checked the calipers and none are leaking.
My suspect is the master cylinder but was wondering if the symptoms are common with the master cylinder failing? I'm thinking internal o-ring has failed due to the near accident event. I'm going to do power steering flush just because I never have. Is there anything that would display these symptoms that I could check before buying the master cylinder?
Ford Super Duty (1999-2016) :: 2000 F250 - Brakes Getting Soft
So a few week back I noticed my brakes were getting soft. Soft meaning that when braking for any distance, I would hear a kind of "pressure release, squeaking" sound coming from the pedal, and the pedal would sometimes go to the floor and the ABS would kick in. Let me tell ya, its a pretty crappy feeling when your brakes aren't doing what their supposed to! So, I replaced the pads all the way around, replaced the master cylinder (bench primed). I took it out for a drive, and it did the same thing. So thinking maybe the fluid is bad, I flushed new fluid through the lines. Took it for a drive, and it felt good right away, the pedal firmed up a bit, and then it did did it again.
Just so I give as much info as possible, the rotors are looking pretty rough and going to be replaced soon.
So, my question[s] are; What is the next step in identifying the problem? Is there a chance the new master cylinder is bad? Could worn rotors cause the caliper to max out and not apply enough pressure? Even though the calipers seemed fine while replacing the pads, could one or more be bad? If so, how do I know?
Ford F-150 - 1997-2003 :: Soft Brake Pedal With Hiss While Applying Brakes
I just joined as I bought my '97 F-150 5.4 4X4 about 3 months ago. The dealer gave me a 6 month warranty but hasn't honored it at all and I've had one problem after another. That's another story though but right now I'm just trying to fix the important issues. The problem at hand are my brakes.
I was noticing a couple days ago (maybe I never noticed it that much as it was a new vehicle to me) that when I apply the brakes it sounds like a bicycle pump and the pedal travels nearly all the way down. It doesn't hit the firewall but I'd probably guess it has 3 more inches or less until it bottoms out. The hissing only occurs as the pedal travels and stops when the brake pedal isn't moving.
Now I'm not sure if the hissing sound is normal as I replaced the brake booster (from the junkyard though) and the new one still hisses when I apply brakes. The brakes seem to work okay, could be more sensitive it's just the pedal feels soft until it almost bottoms out like I stated before and the the brakes grab a little bit harder. What could it be?
Ford Brakes/Suspension :: 1979 - Changed Brake Lines And Master Cylinder But Still Soft?
I have a 79 f150. I changed two brake lines and master cylinder and bleed,and more bleed,but still very soft all most to floor? wheel cylinders look good.
View 2 RepliesFord - Fusion :: 2007 - Rubbing And Wobble Sound That Increases In Frequency As Speed Increase
I have a 2007 Ford Fusion SE 2.3L 4 cylinder. It has approximately 94,000 miles on it. I purchased new Sumitomo tires with a 100,000 mile warranty in February of this year. They were balanced and aligned at the time of install. So far they have been very smooth and quiet with great grip. About 2 months ago I started hearing a noise that sounds like uneven tire wear, a sort of rhythmic rubbing or wobble sound that increases in frequency as the speed increases. It is most noticeable at speeds between 30 and 50mph. I rotate the tires every other other change (at least twice a year) and had the alignment done again in late October. I am hoping that there is nothing wrong with my virtually brand new tires. Is there anything else it could likely be?
View 2 RepliesCamry :: 2004 - Brakes Are Very Soft
I own a 2004 camry 3.0 v6 Car. Recently, i realized that i have to press hard on the brakes for the car to stop and its been like that ever since. I driven my dads rav4 and my friends corolla to test and their cars begin to stop just as i light press on the brakes. Mine however, i need more force to being to slow the car down.
View 14 RepliesPrius (2001-03) :: Brakes Are Soft And Can't Remove Key
Bought a prius off craigslist that didn't have a hybrid battery. Replaced it with a used reinvolt battery off ebay. Car starts right up now. However, there's a few things wrong with it. I can't get the key out of the ignition and the brakes are soft. Could these be related?
I have a fully charged and known good 12v battery in the car. And when I remove it, the key comes right out. If I bleed the brakes, do you think that will solve the problem?
Chevrolet :: 1996 - Soft And Spongy Brakes
A while ago I had to lock up my brakes to prevent an accident. now my brakes are soft and spongy, going all the way to the floor and still not quite stopping. making abs type noise. also, i can press all the way down while standing still, with the same type noise.
1996 chevrolet astrovan
7 Series :: 83 733i - Soft Brakes (Pedal Right To The Floor)
The pedal used to go right down to the floor and would barely stop the car from a crawl, in response I have bled the brake lines to all calipers, and checked the hydro booster fluid level, and with only slight improvement the pedal almost hits the floor.
I am thinking the brake master cylinder is shot. The pedal becomes solid after about 15 pumps when off, and holds pressure, when on it takes several pumps to build any sort of pressure and cannot be built up to the solid point, and looses pressure quickly when just holding the pedal down.
Santa FE SM (2001-06) :: Brakes Pedal So Soft That It Goes To The Floor
I have a Hyundai Santa Fe 2005 2.7L 4WD ABS.
The problem is that the Brakes pedal is so soft, that it goes to the floor, and doesn't brake at all in first pedaling. I am able to apply brakes after pumping the pedal thrice in continuation and then when it builds up some pressure, then it brakes and I'm able to stop the car. Once, I take the foot out of the pedal, it goes bad again. Once, again if I have to apply brakes, I have to do 3-4 times pedaling.
The brakes are stopping the car fine when they get applied in 3rd or 4th pedaling and when pressure is built up. Its the pressure not getting built up or maintained in the first go.
What has been done by the mechanics to solve this:
1. Master Cylinder has been replaced with a new one. (This has been done twice)
2. Brake Pads have been changed.
3. Brake fluid has been replaced and is upto the brim in cylinder reservoir.