Ford Super Duty (1999-2016) :: 2003 F250 - Rear Axle Steel Brake Line Size?
I made a bone head mistake and crunched the steel brake line between the rear axle and the passenger side sway bar mount. Truck is a 2003 F-250 with a 7.3. I would like to go to the auto parts store, get bulk steel brake line and bend it myself. But, I don't know what size the line is or what size the fittings are. Whatare the sizes???
View 3 RepliesFord - Explorer :: 1999 4WD - Where Does The Rear Axle Brake Line Go
I am replacing the rear steel brake lines and I have a bit of a mystery...when the lines come off the wheels, I see them going over the pineapple and it LOOKS like it's just coming down the other side into the other wheel. That should be impossible, right? How would it go about getting brake fluid into the system?
I can't see on top of the pineapple, so I don't exactly know whats going on up there. I don't see any hydraulic hose coming from the top of the pineapple. I'm currently clueless as to how the rear brake lines fit together.
Ford F-150 - 1997-2003 :: ABS Light On With Rusted Rear Brake Line?
When I lost the rear brakes due to a rusted line, naturally the ABS light came on. Will it automatically reset when everything is repaired and working or is there something else that needs to be done?
View 2 RepliesFord Super Duty (1999-2016) :: Rear Axle Breather Vent / Brake Line Bolt Replacement?
so while replacing the rear brake lines in my 2001 F-250. / 5.4, the flex line that drops from the frame bolts to the axle through the axle breather threaded vent line. The friggin thing crumbled on me and now I can't find a replacement for it. Where I can get it or what it's actual name / part number is so I can call the Ford dealer and hope it's not obsoleted?
View 3 RepliesFord F-150 - 1997-2003 :: 1998 F250 - Front Axle Stuck Locked In And Drive-line Shaking
I have a 98 F250LD, its a Lariat, so everything electric/auto. Shift on the Fly 4x4, 5.4, 188K, Factory rear air suspension. Typical Minnesota rust. Anyway, I just noticed in the last 75 miles or so, a drive-line vibration. There is nothing until 39 MPH. Then from 39-41 MPH there is a decent vibration. Stops until 50, then from 50 MPH up it is a steady vibration. I have already changed the u-joints in the rear shaft. I have pulled/wiggled on everything else I can think of with no luck of finding of anything loose.
One thing I did notice, is that the front axle is locked in all the time. How long it has been like this: years for all I know... I can flip the switch from 2wd to 4H and 4L. It all seems to work fine, I hear clicking, the 4x4 engages, the proper lights come on/off. The front axle will pull when supposed to. The transfer case seems to be working fine, but the front axle won't disengage. I am hoping this can be fixed cheaply/easily (DIYer), and also hoping this explains my low fuel mileage.
Front axle? Where to look or what to try and fix for the vibration?
Ford F-150 - 1997-2003 :: Brake Line Fitting Size
Well the time has come where I don't like the way my brake lines look running to the back of the truck. Question is, What size are the fittings on the ends of the lines? I know I will have to special order the line that goes from the frame rail down to the rear axle tube, but is the line that goes from there to mid way frame rail a standard size? I don't want to have to order that if I don't have too.
View 1 RepliesFord F-150 - 1997-2003 :: 1999 - Steel Brake Line Rusted And Leaking
1999 F150 has rusted and leaking steel brake lines. I need to replace all of them but do not know if you have to fabricate them or can you buy the complete kit. I am also confused with the flared end. Have not worked with that type of flare. If they need to be purchased where is the best place to buy them ?
View 9 RepliesFord F-150 - 1997-2003 :: Drone Noise Coming From Rear Axle
I have a 1998 F-250 LD 4x4 with 462,000 km. I have been hearing for some time quite a drone coming from the rear axle. I am guessing the wheel bearings are due, as both front ones have been replaced, but never the rear. More about the noise, I hear it come to life as I gain speed. The faster, the louder. If I decelerate the noise is still present, but volume significantly decreases. Should I change the oil and friction modifier and see if there's an improvement or go ahead and change both bearings too?
View 7 RepliesFord F-150 - 1997-2003 :: 2002 - Rear Axle Drum To Disc Brakes
I got a 2002 f150, right now it has a 9.75 with disc brakes. But it exploded. I can only find a 9.75 with drums in the wrecking yard. Can I just swap my disc brakes on to the axle with drums?
View 1 RepliesFord F-150 - 1997-2003 :: Rear Axle Diff Seal Part Number
What the exact part number is for the seal for the rear axle in a 2003 F150 4x4 ?? Mine decided to leak yesterday and so I looked up Ford for the part but there's two .. one is thick and one is not. I don't want to take the seal out first to look because I got no other vehicle to get it and putting it back in and out would be silly.
View 4 RepliesFord F-150 - 1997-2003 :: 1998 2WD - Rear Axle Vent Tube Blowing Oil
Ok, I have a 98 F150 XLT, standard cab, 8 ft. bed, 2WD with limited slip - if any of that makes a difference.
The rear axle vent tube is literally blowing oil out the top, where it's loosely connected to the bed. It does this every few weeks. I pulled the hose and ran a rifle cleaning rod down it to make sure it wasn't plugged ... it wasn't.
It seems like it's building up pressure somewhere, then blowing all at once, but why?
Ford F-150 - 1997-2003 :: Rear Axle Leak - Seal And Bearing Replacement?
Looking for a video, pictures, or steps that are in depth on how to replace my rear seals and bearings? They are leaking very badly and would like to see some other ways to get it done.
View 3 RepliesFord F-150 - 1997-2003 :: Constant Whine - Rear Axle Pinion Bearing Replacement
I have a constant whine going down the road with foot on the gas. Back off and it quiets up. At 2-3 MPH i think i can here a " tick- tick". Took the drive shaft off, wheels off ground, cover off and oil out. Spin wheel and i can hear a tick - tick, I think around the pinion bearing. No play up and down or in and out, but it appears to have 2-3 times the backlash i would expect. I used the screw driver- stethoscope--- still think its the bearing. This is a 9.75 axle. What kind of luck would I have pulling the yoke off and going in from the front without removing axles halves and ring gear? I thought I had read that here before. Never done one that way .
View 2 RepliesFord F-150 - 1997-2003 :: Violent Chattering From Rear Axle With Either Light Or Normal Braking
Truck is a '99 2WD with drum rear brakes. 81K miles. I rebuilt the rear brakes due to a leaking wheel cylinder. The old shoes were not completely gone, but were worn evenly - everything looked normal.
Not a professional wrench, but I've been re-doing my own drum brakes since the '60's, so it is not rocket science to me. Still, as a precaution, I did them one side at a time so as to have reference point, and also snapped a few cellphone pics just to be safe.
Replaced both wheel cylinders, all hardware, and of course the shoes. Gravity bled the cylinders first, followed by the old tried-and-true, wife in the driver's seat, "down-and-hold, now up" routine. Adjusted shoes to just contact drums lightly, and buttoned it up.
The problem is that I'm getting a violent chattering from the rear axle with either light or normal braking. The chattering is worse as the brakes warm up - shakes the whole truck. At first I thought I had a bad rear ABS sensor, but then I did a couple of stops just using the parking brake, and got the same chattering.
Now I've pulled the drums off to re-check. There is nothing loose, nothing out of place, nothing leaking, but there was a heck of a lot of brake dust in there and the lead shoes on both sides were noticeably more worn than the trailing shoes - and I've driven maybe 100 miles since the rebuild.
You can't reverse these shoes, since the trailing shoe has a peg to hold the automatic adjuster, so that is not the issue. The drums were turned less than 1000 miles ago, so I did not have them re-done at this point.
I had my "assistant" partly depress the brake pedal while I had the drums off to confirm that the cylinders were expanding both shoes, and they are.
Ford 7.3L Power Stroke (1999-2003) :: Driver Side Rear Brake Metal Line Cracked
I had a brake line crack on my way home yesterday(that was interesting..) It was the drivers side rear metal line from the splitter to the rubber hose. I went to autozone and was like ok easy enough this line is the same length and appeared to be the same diameter. bend to fit and all was well or not.. the fitting on the end was a different thread pitch and size. 1999 f250 4wd if it matters....
View 4 RepliesFord F-150 - 1997-2003 :: 2002 - Front Seats Higher Than Rear - Remove Coil Spacers?
I have an 02 f150 2WD with a "leveling" kit. It was on the truck when I bought it. However, the front sets noticeably higher than the rear. The rear has lifting blocks, while the front has the lifted spindles as well as the coil spring spacers. At least I think they are spacers. I had to replace lower control arm bushings a while back, and there were black plastic rings on top of the springs. Can I remove the spacers? If I can, I plan on doing that and replacing the rear blocks with whatever I need to get the stance back. I like the height of the truck now, just hate the front being higher than the rear. I do pull my boat with it.
View 2 RepliesFord 7.3L Power Stroke (1999-2003) :: How To Remove Transmission Cooler Line
As explained in the photo annotations, I can't figure out how to remove this line from the radiator so I can remove the radiator for cleaning.
View 7 RepliesFord 7.3L Power Stroke (1999-2003) :: Pedal Sink When Brake Depressed After Brake Line Replacement?
03 F250 7.3. I busted a brake line last week somehow, Got it replaced and fixed up, Bled that line and everything was somewhat good.
Now, when i hit the brakes hard, I have pressure. If I let off even a little, My pedal will start to sink till i apply more pressure. I am gonna fully bleed my brakes when I'm home to see if this could solve the problem.
Ford Ranger / B-Series :: 1997 - Brake Line Popped?
I've got a 97 Ranger that popped a brake line. The rigid line burst above the rear axle, in the section that comes from the frame rail to the flexible "down" line.
Trouble is, the rigid line that burst disappears between the frame rail and the fuel tank and then comes out a DIFFERENT SIZE where it goes into the proportioning valve.
Looking for a diagram of that line as it travels forward along the frame rail or know where it changes size?