Camry :: Interior Lights Not Working After Bulb Replacement
I decided to put white LED lights in my map light(the front 2 light) and after I put on the bulb I turn the light on and all my interior light including my dome light went off. My car clicker the trunk, alarm, door lock, and unlock doesn't work either so how do I fix. I don't know if I blew a fuse and I can't check as I don't have my car manual.
View 11 RepliesPassat (B6) :: Interior Lights Stopped Working After Replacing Bulb
One of my interior bulbs had blown and all of the others was still working ! I replacement the blown bulb and now none of the work!!
I've had a look thought the manual and cannot find a fuse for this, how to sort this.
Ford Ranger / B-Series :: 1997 - Interior And Brake Lights Won't Working?
Just Bought 97 Ranger 2.3L 5 speed. Everything worked except interior cab light and cab brake light. Also the wipers and A/C blower only work on highest speed when I bought it. I assumed there was a problem with the switches, bulbs and/or fuses. But when I picked it up last evening I noticed the dash lights were very dim on the way home. Then when I got home I shut everything off and removed the key. I then opened the drivers door and touched the brake pedal and the dash lights and the parking lights came on along with the "key in ignition" bell alarm each time I touch the brake pedal. If I close the door the dash and parking lights come on but the key in ignition does not sound. With so many things malfunctioning I don't know where to start.
View 7 RepliesFord - Explorer :: 1997 - Windshield Wipers / Power Windows / Interior Lights Not Working?
I have a 1997 explorer 5.0 AWD. The problem is that when it is about 44 degrees and below, the windshield wipers, power windows, and interior lights don't and won't work. We will run the heater until it warms up the interior, then everything seems to work fine. I usually leave the wipers on so I know when it is warmed up enough. I have checked all of the fuses and all are fine. the only thing that I can think of is there is a crack in the back of the fuseblock that breaks contact when the metal is cold.
View 2 RepliesFord F-150 - 1997-2003 :: 2001 - Interior Lights Stay On?
Yesterday I changed two burned out light-bulbs in the a/c control panel. When I tested them after dark they worked as designed. An hour or so later my brother-in-law called me to tell me my interior lights were on. When I walked out to check the lights were off. This morning my wife drove the truck to the store and called me to tell me the interior lights were staying on. Didn't have this problem before replacing those burned out bulbs.
View 2 RepliesFord F-150 - 1997-2003 :: Way To Make Interior Lights Cut Off When Door Is Shut?
how do make interior lights cut off when the door is shut instead of the delay
View 1 RepliesFord F-150 - 1997-2003 :: Interior Lights Won't Go Off After 10 - 15 Minutes When Leaving Doors Open
I have a '00 Ford ranger and a '99 f-150 , when leaving the doors open , interior lights go off after 10-15 minutes in the ranger but not on my 150. Is there a relay or something aftermarket that makes this possible on the 150 ?
View 3 RepliesFord Wiring/Electrical :: 2003 - Instrument Panel / Interior Lights / Windows / Radio All Not Working
For about 3 months, my wife's 2003 explorer has had a bad door sensor (I'm guessing). The car claims a door is ajar and the alarm would go off randomly if it's locked. Yesterday the battery died because apparently the alarm had been going off for so long while she was at work. After having a stranger jump it, she has had major problems:
-She claimed the headlights didn't work in any setting except in the on position with high beams on, but now they seem to work.
-The instrument panel is totally out including all gauges and all lights
-the power windows don't work
-the radio won't turn on or show any display
-the interior lights won't turn on
All of the fuses are fine and my mechanic checked them as well. He did say that a few key fuses aren't getting any power to them on either side. But the battery is charging and drawing just fine. The car doesn't seem to have any other issues and all of the flashers work just fine.
What the problem could be? I have wondered if one of the relays is busted.
Ford F-150 - 1997-2003 :: Replaced VSS And ABS Wheel Speed Sensor And Speedo Still Not Working
I tried the test mode (hold trip reset and turn ignition to run) this revealed that the needle for the speedometer does sweep from zero to max and back, could it still be the cluster? Is there something I am missing? FWIW the odometer lights up but does not work and all other gauges seem to be functioning correctly.
View 10 RepliesSanta Fe (DM - 2013+) :: Interior Lights Won't Turn On After Bulb Change
So I switched out my bulbs to standard LEDs. I was changing the back map lights when they all turned off.. I thought the timer just ran out but now they won't turn back on..
The rear light in the truck, map lights in the front and the side map lights.. Did I short something? I don't see how as to I wasn't holding anything metal in my hands.. I did have an issue trying to get off the back map lights (i gave up), but not my lights won't turn on....
Ford F-150 - 1997-2003 :: Brake Lights Won't Working?
I noticed that my break lights are not working. Checked the fuses . The break light on the cab works fine. The blinkers and emergency flasher work great. i checked the bulbs and nothing wrong there. Truck runs and drives great. But no break lights.
View 7 RepliesFord F-150 - 1997-2003 :: Reverse Lights Not Working
I have an automatic 5.4L (L code) 2000 Ford F-150 and I am having problems with the reverse lights not working when I place the transmission in reverse. Fuse #5 in the passenger compartment fuse panel is good and both reverse lamps are good as well. I have also metered the LB/PK input wire at DTR sensor and it is reading 12 volts when the ignition is in the on position. I have also the metered the BK/PK wire output wire at the DTR and this wire also reads 12 volts when I place the transmission in reverse. I have checked continuity from the BK/PK wire at DTR to the BK/PK wire at the reverse lamp socket and I do not have continuity. I then ran a fused jumper wire from the BK/PK wire directly to the BK/PK wire at the reverse lamp socket and the lamps will light up when I place the transmission in reverse and will also turn off when the transmission is placed back in park. So it seems that the DTR is not defective. I'm not sure what else to check. Obviously the BK/PK circuit is open at some point between the DTR and the reverse lamp socket, but I'm wondering if there is something else that I need to check. The vehicle is also equipped with a factory trailer tow package
View 3 RepliesFord F-150 - 1997-2003 :: No Blinkers Or Brake Lights Working
I have a 1997 Ford F250. My trailer lights will work, but I have no brake lights or turn lights. I have checked all my fuses and all the fuses are good.
I was told it was probably my trailer tow relay, so I bought it at O'Reilly's, but I don't know which relay it is exactly.
I just want to know which relay number it is so I can replace it. And, if this doesn't sound right, is there something else I should be trying?
Ford F-150 - 1997-2003 :: 1995 - Trailer Lights Won't Working?
1999 5.4 auto
I have no trailer lights. I have checked all of the fuses. I cecked for voltage and am reading 0v what am I missing?
Ford F-150 - 1997-2003 :: Brake And Turn Lights Are Not Working
I have a '97 F150 and the trailer break lights and turn lights are not working. I have checked the fuses under the dash and hood and all fuses look fine. I have also tested the trailer on another vehicle and checked the wires. Trailer lights worked and wires and connections looked fine. In searching the forum I noticed a similar problem [URL] .... and it was fixed through a third fuse box that was not in the manual. I haven't been a user long enough to send e-mails, but it looks like WhipsnHorses was the one that provided the answer before.
View 12 RepliesFord - Explorer :: 1994 - Overhead Map Lights Not Working After LED Bulb Swap
I decided to replace my interior light bulbs with LED's. I started by swapping out the overhead lights. There is one bulb for the dome light that lights up when the doors are open. That light works fine with the new LED bulb. But the two bulbs for the map lights won't work. When I was installing them my screwdriver touched somethings and made a spark. I figured I blew a fuse but all the fuses under the dash don't appear to be broken.
Why is it that the door ajar dome light works but the two map lights wont turn on? Are they not on the same fuse? Is there a fuse in the fuse box under the hood that I should check? I also noticed that my radio has no power. Fuses looked good. The wiring seems fine. The lights worked before I swapped the LED bulbs in. Tried putting the halogen bulbs back in and they still don't work.
Ford F-150 - 1997-2003 :: 4wd Not Working - No Noise Or Lights On Dash When Turn The Key
I am working on this 97 F150 with the EOTF. It is not doing anything. When i turn the key on, no light on the dash comes on. When i operated the 4wd switch, nothing happens, no lights on the dash, no relay clicks or transfer case noise, etc. It has a new t case motor, the switch tests out good. I have researched for a while, and either find people with different symptoms or the original poster never updated with what the fix was. I am unsure where to go at this point, i am suspect of the GEM or the t case relay, but don't want to go replacing stuff without a basis for going so. Ive tested for voltage at the switch as well and it has 5 volts at pin 3.
View 13 RepliesFord F-150 - 1997-2003 :: Unable To Shift Out Of Park And Brake Lights Not Working
A couple times recently, I've been unable to shift my truck out of Park & the brake lights don't work.
After checking the related fuses & finding them to be ok, it all works again.
What might be causing this to happen?
Ford F-150 - 1997-2003 :: 1998 - Brake Lights Not Working / Clicking Under The Dash
Brake lights do not work. The turn signals work, the flashers work, and the running lights (head lights) work. I checked the bulbs and both filaments light up during the above processes.
I removed the brake switch at the pedal. When I was removing it, I heard some clicking under the dash. I connected the 2 pins with a wire (bypassing the switch), and got a spark a few times along with the clicking sound like a relay,and the brake lights would come on, but now nothing. No sparks, no clicking. The flashers and turn signals and running lights still work.
There are no blown fuses in the fuse box to the left of the steering column. Is there a relay somewhere under the dash just for the brake lights?