Ford F-150 - 1997-2003 :: Driver Side Window Keeps Going Down By Itself
Having an issue with my 97 f150 its a 4x4 with 4.6L engine the issue is my driver side window keeps going down by itself. I changed the switch and relay for the power windows and still doing same thing?
View 2 RepliesFord F-150 - 1997-2003 :: 1999 - Passenger Window Will Not Go Up
I have a 1999 f150. The passenger window rolled down, but will not roll back up. Replaced the motor, just to get the same result. Any good place to start on this? Is there a relay or something i may be overlooking?
View 2 RepliesFord F-150 - 1997-2003 :: Rear Window Leaking?
My rear window is leaking on my '97 f-150. When it rains water gets in on the passenger side only. I know from reading that this is a common problem. I've tightened up the fasteners that hold the window in place, but it still leaks. Could the high mount brake light be the entry point? Is there supposed to be a gasket behind it? Or is any water that may get behind it supposed to be channeled away somehow?
View 14 RepliesFord F-150 - 1997-2003 :: Driver Side Window Would Not Go Down
I have a 97 expedition It started a month ago crossing the border, I stopped at customs booth drivers side window would not go down. During the next couple of days the drivers side window would go down by itself, and I would have to bring the window back up. I have done alot of research on line everyone was telling me it was the GEM Module.
The window switch is good and the window regulator is good. Brought to my neighborhood mechanic, he said he was 90% sure that it was the GEM Module, he even said that he was tapping on the GEM Module and the window would go down on it's own. I decided to order a GEM Module online to fit my vehicle, received it on Saturday, installed it. [found no moisture around module] Same Problem, window would not go down. Now I have the drivers side motor unplugged from the switch.
Ford F-150 - 1997-2003 :: Driver Side Window Stuck Up
1998 f150 4x4 the drivers window is stuck up. It clicks by the up button but not the down button. The pass window works fine by both buttons, the door locks work fine. Took out the switch it tests with a ohm meter fine. The switch has power to it. I took out the window motor jumpered it to the battery and it works in both directions. Manually ran the window up and down and it moves freely. I swapped the relays under the dash and everything operates the same. I'm not sure where to go next for trouble shooting this problem.
View 6 RepliesFord F-150 - 1997-2003 :: Power Window Motor Replacement
What do I need to do to replace the drivers side window motor in my 97 f150? Do you need special tools? or just pull the panel loose from the door replace and motor and push the panel back on. Or is there plastic clips that are going to break off?
View 7 RepliesFord F-150 - 1997-2003 :: Air Noise Around The Doors Which Is Up In The Window Area
2000 f150 supercab 4x4 offroad. Sometimes in a very strong wind, I get a lot of air noise around the doors which is up in the window area. I occasionally get it if I haven't got the back half door shut tight.
Just wondering if there is a way to puff up those door seals without replacing them? Inject them with something or use a hair dryer to heat them?
Ford F-150 - 1997-2003 :: Water Leaking Through Top Of Rear Window
I have unfortunately discovered that rain is coming through the rear window of my truck. If it was a big job to fix it. The caulking appears to be rotten and I'm wondering if some goop will seal it up. I'm just not sure how to get the trim off!!
View 14 RepliesFord F-150 - 1997-2003 :: Removing Trim Around Rear Window?
How to remove the trim around my rear window. Do you just pop it off somehow?
View 14 RepliesFord F-150 - 1997-2003 :: 2001 - Window Falls When Rolled Down
I have a 2001 Ford F150 Super Crew. Last year it got really cold (2 degrees) and I went to roll down the driver's side front window to get ice off of my mirror. Something broke and my window fell down into my door. I was able to fish the window out and it rolls up and holds the window in place. It will go down a couple of inches, but when it falls it kinda falls forward and then to the bottom.
I have the panel off again right now because my wife used my truck and forgot about the window and I had to go through the process of getting it out again. So I figure now is a good time to fix it.
What broke and what I need to do to fix it? As I say, it will catch and work fine once I pull the window to a certain height and then it seals just fine as long as I don't use it. I looked at other threads and none seemed to fit exactly what mine is doing.
Ford F-150 - 1997-2003 :: Power Window Switch Illumination Has Gone Dark
My power window switch illumination has gone dark on one side of the switches....
View 3 RepliesFord F-150 - 1997-2003 :: Driver Side Window Opens Randomly
Found a related thread but ....a year later and no update? [URL] .....
Anyhow, today my 97 F150 XLT became possessed and the DS window started coming down by itself at random. Make for an exciting ride when the weather is in the teens!
My first thought was the wires at the door but it's been too cold to dig into it today. Will look when it warms up a bit. I need to pull out the manuals but don't think the PW should go through the GEM?
Ford F-150 - 1997-2003 :: Driver Side Window Quit Working
I have a 2002 F-150 SC and the drivers side window quit working yesterday. All the other windows work fine and I can't see where anything else is not working. The only other thing that quit prior to this window problem was the cruise control quit a while back.
View 1 RepliesFord F-150 - 1997-2003 :: 2002 - Rear Window Leaks When Rain?
I have an 02 extended cab F150 and whenever it rains the rear window leaks (it doesnt have a slider, it's solid) and the half doors leak too... i sealed the back window with caulk to try and fix it and it worked for about 2 storms and then it started to leak again. The side doors leak at the seam where they meet the front doors... Should i order new seals for the windows? or is there a simpler way to do it that isnt as expensive..
View 9 RepliesFord F-150 - 1997-2003 :: 2001 - Passenger Side Window Won't Roll Up?
I just purchased a 2001 F-150 XLT and while driving it back to town my brother rolled down the window and now it wont go back up! The drivers side works fine, but the passenger side wont roll up using either side of the switches. I know it isnt the motor because neither side would work. What it might be or how I could fix it?
View 5 RepliesFord F-150 - 1997-2003 :: 1999 - Driver Side Power Window Is Up And Will Not Lower?
The drivers side power window in my truck is up and will not lower.
I took off the interior/trim panels. Accessed the power connector for the window motor.
I can hear the relay cycling. when I put a meter on the power connector, I get voltage applied for the "up" condition, no voltage for the "down" function.
Sounds like a bad relay to me. What say the wizards? Where is the relay located?
Ford F-150 - 1997-2003 :: 1999 - Driver Side Power Window Not Working
The drivers side power window in my truck is up and will not lower. I took off the interior/trim panels. Accessed the power connector for the window motor.
I can hear the relay cycling. when I put a meter on the power connector, I get voltage applied for the "up" condition, no voltage for the "down" function.
Sounds like a bad relay to me. What say the wizards? Where is the relay located?
Ford F-150 - 1997-2003 :: 2001 - Factory Sliding Rear Window Leaking
2001 F150 Supercrew Lariat, the back window is the factory sliding window, it is leaking around the top on the drivers side, leaks bad. Question is how easy is it to remove the window and replace the seal?
View 10 RepliesFord F-150 - 1997-2003 :: 2002 - Reseal Sliding Rear Window Glass
My 2002 has a sliding rear window. I noticed the rubber weatherstripping pieces that seal the sliding piece of glass was out of place. I slid the window open and it fell off. I then looked at the others and they were being held on by a thread.
I took them off. There is black rubber or weatherstrip adhesive in the tracks the strips came from. Do I need to scraped that out and reapply adhesive? Is there a video or tutorial on this somewhere?