Ford Excursion :: Front End Clunking / Track Bar Bushings
So I can clearly see the track bar clunk in and out about 1/4 inch when the wheel is turned in either direction...guessing its time for new bushings.
What's the latest and greatest on these? or is "whatever they have on sale at summet from moog" is fine?
OEM only? Truck has a 4" lift, stock bar attached to the drop bracket.
Ford Excursion :: 2005 - Rear Seat Adjustable?
Just wondering if the second row seats in a excursion r adjustable. Wanting to make the rear seat of my 05 F250 adjustable.
View 13 RepliesFord Excursion :: Adjustable Brake Pedal - Throttle Doesn't And Never Did Adjust
The adjustable brake pedal on my excursion works fine, but the throttle doesn't and never did adjust. It just doesn't move at all. Why? Just a bad electric motor on the adjuster? Just curious if there is something common that fails before I delve into trouble shooting it more.
View 7 RepliesFord Excursion :: Clunking From Front End?
I recently ran into the "clunking from the front end" problem with my Excursion. It is 2WD but this might apply to all. I had the clunk under my left foot while driving over a series of small bumps. It was a rapid clunking. One big bump, or things like speed bumps did not produce the noise or feel in my feet. Only rapid irregularities in the road at 35 mph or greater made it happen.
It made me crazy trying to figure it out. I tried everything. Both sets of swaybar links, shock mounts, track bar mounts, made sure brake calipers were tight, you name it. It showed its ugly head every time I hit small bumps in succession at speed. Even tried to re-seat the coil springs but that didn't work! My front bearings made NO noise. There was NO play in them by hand while up on jacks. I had taken them out and repacked them while replacing front brakes. At my wits' end, I went for a "hail mary" shot. I purchased new bearings. Took it all apart, packed the new bearings and replaced.
Low and behold! The damn "clunking" is now gone! So, in short, IF you have a clunking that nothing else seems to fix, just try replacing the bearings even IF you feel NO play in them. I couldn't believe that bearings that felt so tight by hand would be causing such clunking.
Ford Excursion :: Front End Clunking Noise?
I've had a front end clunk best felt on the floorboards at very slow speeds on uneven ground. I've read for a month on this site on this issue and have replaced the ball joints and sway bar end links with Moog parts. New shocks also. Well I've improved but its still there. I cannot budge the trac bar bolts with breaker bar. The axle u bolts seemed loose so I tightened them but I'm not sure of the torque specs on them. What are the torque specs on the u bolts and where to go from here?
View 14 RepliesFord Excursion :: Clunking Sound Coming From The Rear When Stop And Takeoff
I have a clunking sound coming from the rear of my X when I stop and take off. The sound does not happen until the vehicle has been driven for a few miles. After it has been driven, I will get one clunk when I stop. When I take off I will get one clunk as the vehicle starts to accelerate, and another clunk as I give it a little more gas. What could be the cause of this? I do not get the sound when I shift from park to drive, or drive to reverse.
View 14 RepliesFord Excursion :: Clunking Sound From Front End When Accelerating From A Stop
When accelerating from a stop, I get a clunking sound from the front end. I took some pics of the sway bar and I think it maybe loose. There is a gap between the bolt between the bar. Is this normal, or can I tighten it with the X on the ground or does it have to be up on a lift to properly tighten?
View 14 RepliesFord Excursion :: Clunking Noise - Front Sway Bar End Links
I plan on replacing as I have a clunk happening. Thought I'd try here first.
Is there a brand that's better? 1Aauto has OEM. Is there a brand that's better or makes a difference?
Or is a front sway bar end link a front sway bar end link?
Ford Excursion :: Clunking Noise From The Left Front Going Over Bumps
I need to replace the rubber axle bumper guards. I have a clunking noise from the left front going over bumps. Troubleshooting I found the left front axle bumper guard is missing, right side is missing chunks and dry rotted. I had a question about how they attach. The one that is missing looks like a rusted bolt snapped off. Is it safe to assume a bolt goes right thru the center of the bumper guard into the frame? Couldn't tell on the right side it is in bad shape. Right front bolt may have sheared off on the bottom and just held in on the top by what is left.
View 5 RepliesFord Excursion :: Clunking Noise In Front End Only Happening During Suspension Travel
I have a noise in the front end that is only happening during suspension travel. It is really bad on bumpy roads. I thought it was my sway-bar end links but they are a year old and tight. I have checked the shocks and they are tight. It sounds like a clunking noise. Could the front drive axles be making this noise while not locked in?
View 14 RepliesFord Excursion :: 2000 - Clunking Noise Form Front Axle?
I have a 2000 ford excursion limited when i drive a loud clunking noise comes from the front end, so i pulled the front passenger tire off and realized what looks like the axle bearing behind the hub assembly is rattling around. What part is that. I am going to post a picture tomorrow in the day light.
View 2 RepliesFord Excursion :: 2003 - Track Bar Replacement?
I'm attempting to install new x codes on the front of my 03 x and I was wondering if the track bar should be replaced? Bought one just in case, oh and any tricks in getting that bad boy off?
View 10 RepliesFord - Mustang :: Thumping / Clunking Sound Coming From Front End
When being driven my '66 Stang makes a clunking sound in the front end which seems to be coming from the front toward the passenger side.
I've had the car in to my mechanic twice in the last 30 days for this issue. He took the wheels off, repacked the brakes on one side, but hasn't found the problem. During the test drives the car did not reproduce the noise.
Lately, I've noticed that when I really hear the clunking noise is after I've made a sharp turn, like when driving slowly in a parking lot, and have returned the steering to a straight position. We didn't make any sharp turns during the test drives.
Ford Excursion :: 2004 Sitting Low On Driver Side - Track Bar?
I changed out my front springs awhile ago and recently pulled off the track bar and replaced the bushings with Energy suspension bushings.
Today I noticed that the Ex is sitting a bit low on the drivers side. I measured from the bottom of the fender to the ground, drivers side 40 inches, passenger side 40 1/2 inches.
It was really hard getting the track bar back in after the bushing change. Would an adjustable track bar fix this?
This is for a 2004 Excursion 4x4 with a 6.0. Bilstein shocks, approx 1 1/2 years old.
Ford - Taurus :: Rattle / Clunking Sound Coming From Front End When Going Over Bumps / Noisy CV Boot?
'01 Taurus with an occasional rattle/clunking sound coming from the front end when going over bumps. Took it to the local shopping center auto. service dept. (probably 1st mistake I know) They say the only thing they could find was the RH CV boot was bad and was probably the source of the noise. Doesn't sound right to me since the boot is rubber and what I hear is more of a metal sound..what I was thinking possibly a suspension link or tie rod end. I know what a bad cv JOINT sounds like and it's nothing like this. Now if the CV boot is bad I don't mind to replace it, but I don't want to spend the money if it is not going to solve the problem. I've never heard of a boot making noise before.
View 2 RepliesFord Super Duty (1999-2016) :: 2011 F250 - Clunking / Loose Sound Coming From Front End
My 11 cc lb 4x4 6.2 has a clunking/loose sound coming from the front end. It is prominent when going over small/medium bumps but not so much large bumps. I have had my local dealer and a couple local shops look at it and they all say everything checks out. It definitely seems like something is loose in the front suspension. I just put new Gabriel max control shocks on all four corners. I have no play in wheel bearings or ball joints. Tie rod ends also look fine.
View 12 RepliesFord Super Duty (1999-2016) :: Crunching / Clunking Noise Coming From Passenger Front Suspension
2012 truck, started making a noise today. I cannot tell what it is, but seems to be coming from the passenger front suspension, its a crunching/light clunking sound, happens when going over bumps, when the truck pitches one way or the other turning, and coming to a stop....
Truck has 6k miles, I did a quick visual inspection this afternoon, didn't notice much, but the sway bar endlink looked a bit odd though, not sure if normal, its gota little bend too it and seems to just contact the vac line mounted behind it, seemed unusual...
Maybe its its just one of the crappy rancho branded shocks is junk?
Ford Super Duty (1999-2016) :: F450 V10 - Loud Clicking / Clunking Noise Coming From The Front
I thought there was a v10 specific superduty section like how the psd does, but my thread went in the "performance, engine, troubleshooting" section.
I wanted more exposure than that particular small viewed area.
I don't have a video of the noise, but my 99 f450 v10 5spd has some iffy noise coming from the front. I've read so many threads on this and they either end with "my motor had 1-2-3 bad pistons" or "my flexplate was cracked" and all that dealt with chain tensioners were never finished.
I know what piston slap sounds like (worked on many cobras and lightnings with forged pistons that had it) and have experience with bad wrist pins and broken piston skirts, and this noise doesn't sound like any of it.
Noise is a loud clicking/clunking/Detroit diesel idle noise. When you rev the engine up it doesn't lighten or get better, only worse as rpm goes up. Oil is terrible looking, I'll be getting that changed this week.
Story on truck. I've had this thing for 4 years with blown motor. I got a buddy that acquired a parts truck and he said it ran good. I dropped my truck off and he swapped the engine. I got my truck back running, but with this engine noise. He said it needs to get run some more and change oil.
I think it's timing tensioners, my buddy says it will come out of it, a mechanic friend says it's going to blow up "because they all do" and I don't really want to replace the engine again.
If it's tensioners, how big of a job is it. I have the cam clamps and crank stop and the ford tools to make sure crank and cams don't rotate while apart.
I'm just 650 miles from my truck and may need someone else to do the work. Which sucks.
Ford 7.3L Power Stroke (1999-2003) :: Fairly Loud Clicking / Clunking Sound Coming From Front Under The Hood
So my '01 E350 has been fine but tonight when I went to start it I didn't get a WTS light and the SES light was on and there was a weird number on my PHP Hydra that looked like r5 ? This happened a few times back to back so I tried starting it and it just cranked and cranked. Wtf? So I started pushing the button on the chip and all of the sudden I got the WTS light and the hydra flashed, now the chip was on tune 10 instead of 5 where it was when I parked it. I should also note that during these episodes there was a fairly loud clicking/clunking sound coming from the drivers front under the hood when I toggle the key on.. Sounds like maybe a relay? Louder than I recall ever hearing.
View 5 Replies