Ford Excursion :: 2002 - Cruise Control Quit Working?
The ruck is a 2002 Ex limited v10 4x4. The cruise worked fine till my wife drove the truck! the green cruise light blinked a few times, now, there is nothing.I'm no good at electrical issues.
View 3 RepliesFord F-150 (2004-2008) :: 2006 - Cruise Control Just Quit Working
The cruise on my 06 F-150 just quit working. No light and can't set it .
View 1 RepliesPrius (2004-09) :: Cruise Control Quit Working
I noticed today that my cruise control quit working. Car has about 58K miles, the "cruise" light comes on when the button on the end of the switch is pushed in, but the device itself doesn't work.
View 7 RepliesSanta FE SM (2001-06) :: Cruise Control Just Quit Working
I was recently on a road trip, using my cruise control extensively (like usual) when it just quit working. I tried to reset to a lower speed, but it would rev itself back up to the original speed. I turned off the cruise control, drove a mile or so and turned it back on. The cruise dash light came on, but the right control buttons no longer worked. No check engine light. It's never worked since.
My local tire shop checked codes and found the tcm not communicating with the mod (cruise module?). I'm looking to take it to the dealer, but I'd like to be better informed with what I may be dealing with before I get there.
GMC - Yukon :: 1996 - Cruise Control Quit Working
In 1970 I bought one of the first Chevrolet Blazers. I drove it until two years ago when it finally was just too worn out to drive, at close to 300K miles. I sold it to someone who is in the process of restoring it for show. I knew that I wanted an other 2 door Blazer, but they quit making them in 1995. After a long search I purchased an original 86K miles on a 2 door 1996 GMC Yukon SLE. I love this car.However, I have just experienced my first mechanical failure. I am a fairly good shade tree mechanic. At 70 years old I have worked on every vehicle I have ever owned. So I am trying to figure out what has gone wrong with the cruise control. On a return trip from our lake house in Kansas (yes, there are lakes in Kansas) to my home in Nebraska, as I was going up and down the rolling prairie hills, the cruise control started having trouble going up the inclines. Then it quit working altogether. I checked the fuses and they are ok. My next thought is the control unit has quit working. I looked for a replacement unit and saw the price.... Is there something else that I could check before I replace the control unit? Is there any way that I can verify the control unit is at fault
View 1 RepliesFord Excursion :: Cruise Control Not Working?
Have this problem?
View 2 RepliesPrius (2004-09) :: Steering Wheel Controls Quit Working - Cruise Control Inoperative
My steering wheel controls on the lower half quit working last year , then the cruise control quit intermittently last month , then the air bag light starts appearing last week. Deciding this means a failed clock spring / spiral cable , I took apart my spiral cable housing, and found two obvious breaks in the electrical wiring . I first bought a salvage unit on Ebay, to find it arrived bound, didn't turn freely (and no returns from seller). I then bought one from the dealer and installed it last week and very happily have all symptoms fixed!
The replacement was easier than I expected, the steering wheel was not actually very tight, I doubt I needed the steering wheel puller I 'borrowed' from the parts store , could have just loosed the main nut, wiggled and tugged it loose. Just a note be sure to remove 12 volt power from the car, and mark the steering wheel center shaft to the steering wheel for reinstall .
As a rural mail carrier I deliver mail out of my prius with the window down, traveling about 5 hours a day on dusty ,sand roads in Kansas. The car interior gets dusty and this caused the failure of the spiral cable.
Pic's of the old failed unit, the new one comes with some lubricant, white perhaps lithium grease for the ribbons/ wheels, mine had dryed up patches of grease, some I cleaned off the ribbons before the pictures where taken. I'll check the new one in a year, may regrease , cleaning it out to try to prevent this from happening again. I did add some plastic under the airbag to improvise a dust shield for the new spiral cable. Car has 197k bought it with 106k , now has around 60 k from driving on the route.
Ford Excursion :: Cruise Control Not Working Intermittently?
I had had intermittent issues with the cruise control not working in my excursion. most of the time it was fine though. after a recent 150 mile trip it stopped working half way through. i didnt worry about it too much..got back into town and checked under the hood. i found brake fluid running down the inner fender well! all over everything under the master cylinder. finally tracked it down to the cruise control switch on the master cylinder leaking. I pulled the plug apart and it was full of brake fluid.
Meanwhile the master cylinder was about half full, so i replaced it with the same switch out of a '96 parts explorer which is the same part luckily. also yes i have had the cruise control recall done. So if you have lost CC and you have a leak replace the switch! seems it can leak..and at a pretty good rate..alittle scary! glad i figured it out before my 800+ mile trip later this week/weekend.
Ford Excursion :: 2001 - Cruise Control Won't Working?
Looking for any pointers on fixing my cruise control Have looked around under hood but what it looks like. I've got the air working again,put Warn hubs on and have ordered the Hellwig rear sway bar,adjusted steering box i/2 turn....
View 14 RepliesFord Excursion :: 2001 - Cruise Control Not Working
The cruise control in my recently purchased '01 Excursion isn't working. I've done a lot of searches and discovered there was a recall for a wiring harness: 2001 FORD EXCURSION Recalls
I called my local dealer and they stated there aren't any open recalls for this vehicle, so the previous owner must have taken care of it.
Is there any way I can verify that the warranty work was done? Can I visually inspect the harness? What else I can check to fix the cruise control? The lights on the steering wheel are illuminated.
Ford Excursion :: 2003 V10 - Cruise Control Not Working
I have a issue with my cruise control not working. The Ford dealer in my home town has had my truck for 3 days now and cannot figure out what the problem is. I finally went by the dealer and wanted to know what the deal is and how can this take so long to figure out when they have to of seen issue like this in the past. The tech that is working on my truck said he has traced wires,etc and think it has something to do with the after market JVC touch screen DVD/backup camera. My question is would this affect the cruise? I cannot find anything on the net that may point in that direction. The steering wheel controls work for the fan and temp controls but not the radio as its aftermarket. Radio adapter for the controls?
View 14 RepliesFord Excursion :: 2001 V10 - Cruise Control Not Working
I have a cruise control issue. I tried the self diagnostics test, and the "cruise" light would not come on. (Also read that 2001 did not have a self test, so maybe that's why it didn't work? Also, when I first start it, all the other lights turn on except for cruise.) I checked the brake master cylinder and it has the double fuse wiring with 2 good fuses. Not quite sure what else to test. I just bought the X knowing it had this problem, but didn't know how much I would miss cruise control until driving without for a week.
View 12 RepliesFord Excursion :: 2000 - Cruise Control Not Activating
The cruise control isn't activating on my 2000 X. The light will come on, on the dash but it never sets. Are there any common issues with this system and is there anything specific I can check?
View 14 RepliesFord Excursion :: Fuel Gauge Is Not Working / No Cruise Control?
My fuel gauge is not working, nor is the cruise control, Had the truck looked at, was told the cruise was not working due to the fuel gauge not working?
Also when he hooked it up was told the dash gauge worked fine and the computer showed 60% which would have been about right based on mileage on the tank. My guess is that I need a sending unit?
Ford Excursion :: 2001 - Cruise Control Stopped Working
One day it work and the next day it didn't. I checked the 15a fuse and it was good. What else should I be looking at?
View 12 RepliesFord Excursion :: 2003 2WD - Cruise Control Working Intermittently
2003 X limited 2wd 6.0L ... My cruise control was working intermittently. Could it be the buttons on the steering wheel itself? there is a cluster that I see. Does it pop off to expose the connectors/switches? Can these go bad? Can I buy new switches for the steering wheel?
View 2 RepliesFord Excursion :: When The Engine Is On Horn And Cruise Control Not Working
Many of you said it was the "ClockSpring" that needed to be replaced. But I already did that. A brand new clockspring on it. The horn only blows when the engine is off and when the engine is on the horn and Curse Control don't work. I have a 2001 Excursion. So What could the problem be? It works with the keyless remote. But just when you driving down the street and some bone head cut you off you can't just it.
View 5 RepliesFord Excursion :: 2000 - Truck Starts To Shudder With The Cruise Control On?
I just recently bought a 2000 excursion 7.3 diesel. I'm new to diesel but learning. So far I've installed a new drop in filter in my airbox. Cut out the plastic behind the grill for cold ram air into the intake. I've done the FPR mod and cleaned out the exhaust back pressure tube. And last but not least I installed an Edge Evolution 2 programmer running stage 3 with timing advanced 2 degrees. Nothing else to the custom settings other than what stage 3 provided. Here is my problem. On the freeway at 65-75mph cruising with the cruise control on, the truck starts to shudder. I suspect my TC lockup is going out but not sure. So I wanted to test it buy installing a manual lockup switch. So I installed the switch running a wire from the plug going into the transmission on the purple with yellow wire using a saddle tap to a switch to part of the dash frame under the dash. Went to test out the switch and nothing happened.
As y'all and other forum's have described I should feel something and the od light should start flashing. I get nothing. Tried testing the switch and my ground source and everything tests out fine. Tested the saddle tap. Its fine. Tested with the switch on and using a meter to check ohms at the tap to the frame of the truck I'm getting 8ohms. I would think there shouldn't be any resistance because its a dead short but that's what I'm getting. Am I connected to the right spot on the transmission or should I move the tap to the plug under the brake master cylinder. Could my TC lockup solenoid be going out and that's what's causing the shudder and why the manual switch doesn't work.
Ford - Explorer :: 2000 XLS - Cruise Control Not Working
Cruise control is not working on my 00 Explorer. The horns were not working as well so I assumed the clockspring at first. Upon checking out the underside I found that the horns were not grounding properly. Cleaned up some rust and installed new ones. Good as gold. The cruise is still a problem though. The lights are also out on the steering wheel. I checked all the fuses associated with it and they are all good. What else could be the cause of this. Clockspring still possibly?
View 1 Replies