Ford Escape / Hybrid :: 2005 - Cruise Control Does Not Work
I recently got an Escape and I am having a issue with the cruise control. That being, it doesn't work. The control module under the hood is all hooked up, the linkage the the throttle body and all. No broken cables.
The brake lights work as intended, and only when the brake is applied. On the inside, the dash-light cruise indicator works fine.
I ran the diagnostic by holding the off button and turning the key on. The cruise light flashes and I begin the sequence. I noticed I was pushing the brake out of habit while running the first few tests. They all returned 2 flashes upon completion of the diagnostic. All other buttons were registered.
Now the strange part, when I took my foot off the brake and did the same test, the final result is three flashes of the cruise light. I understand these flashes represent a fault, and I am having a hard time as I cannot find one.
What do these results mean? I'm thinking the brake being applied gives a fault surrounding the fact that cruise is disabled when the brake is applied.
Ford Escape / Hybrid :: 2001 - Cruise Control Not Working
The cruise control has not worked on my 2001 escape since i bought it a few weeks back. i checked the usual culprits and everything is good. i plugged my scanner in and got a control module code.
c1945- park switch indicates park with vehicle moving.
I did do some live data testing and it does infact show park when in gear. the display on the dash shows the proper position.
I am almost certain this is the issue with my cruise. Where this sensor is? Doing a parts lookup isn't showing much.
Ford 6.7L Power Stroke Diesel :: Cruise Control Won't Engage?
I had a nice level straight stretch in front of me and engaged the cruise control. No go! I tried a few more times and it still did not engage, even with various button sequences. My thought was that this truck is a computer on wheels. So at the next opportunity I stopped and shutdown the engine, turned the ignition switch OFF and then restarted started the engine (and rebooted the computer). The cruise control works fine!
View 14 RepliesFord Escape / Hybrid :: 2008 - Steering Wheel Cruise Buttons
My 2008 Escape LTD AT steering wheel has a chunk out of it, so I got a steering wheel off eBay advertised as a '2008 Escape' steering wheel (came with upper part of column also). The color is the same, and it looks exactly the same - except for one cruise control button.
I don't know if there was a difference between the MT and AT cruise controls; the owners manual doesn't say. Or if maybe this wheel is from a different year than 2008. What I would like to know is if the wire connections will be the same, if the 'Set-' button is the same as the 'Cst-' button.
I'd hate to swap them and then find out there was a different pinout for the eBay cruise buttons....
Ford F-150 - 1997-2003 :: 2000 - Cruise Control Will Not Engage
2000 F 150, 4.2 v6, M5OD-2 Manual Transmission, LX, reg cab .. Cruise Control passed all static and dynamic self test. All fuses inside and under hood checked good and still cruse control will not engage. All other functions work: brake lights, turn signals, etc. Green cruise light is operational, checked pin #10 on wiring harness at servo,amplifier unit under hood and have good ground. The Cruise ON button will not turn on cruise control system and will not light green cruse light.
View 4 RepliesFord Escape / Hybrid :: 2006 - Overdrive Light Warning And Occasionally Loses Power On Acceleration
I have a 2006 Ford Escape that's turning into a mystery. Over the last few months the warning lights have been reporting issues with the overdrive. I've taken it to the mechanic who hasn't been able to identify the issue.
He's cleared the issues from the ECU, and the car doesn't complain for about 2 weeks, then it reports a different issue related to the overdrive (eg: OD or transmission).
Possibly related, the car occasionally loses power on acceleration. When taking off from a stop, it'll be really underpowered while getting up to speed. This only happens occasionally.
Is it a part failure, or could it be electrical or related to the sensors?
Ford Escape / Hybrid :: Broken Bolt But Can't Get Control Arm Out?
well Im working on mother in laws 2002 escape...replacing wheel bearing and ball joints...I went with replacing control arm with ball joint already pressed in , I did try to press out old ball joint first but it wasn't budging...so I went on to the control and the back bolt came out fine...except threads at top of bolt look worn bad...anyways moved on to front and it was tight and moving along good...sprayed down with pb blast moved it back in sprayed again and waited a bit....as I went to bring it back out it snapped....I got the broken bolt out...it broke right at where the threads start...anyways Im having problem with gettting the control arm out while the rest of that bolt is still in there.
View 14 RepliesFord Escape / Hybrid :: 2008 - Traction Control Light Came On
I just bought a 2008 Mercury Mariner about a month ago. A couple of times the Traction Control light came on from when I started it, until I turned it off (5-30 minutes.) Then it didn't come on for days. What the problem could be??
View 1 RepliesGolf V R32 :: Cruise Control Won't Engage
On my commute home today I tried to engage cruise only to find that would not engage. I cycled the switch a few times but that didn't work. I told a friend of mine about it and he mentioned that he experienced problems with his cruise on his GTI after he had switched the units on the MFD. Even though I didn't switch my units, when I got home I put the car in park and changed the units from U.S. MPH to KM/H and then back again to U.S. MPH. Lo and behold, cruise worked again afterward. Strange.
View 15 RepliesFord Escape / Hybrid :: CEL Code P0403 - EGR Control Circuit Malfunction
After about 6 months I finally got the alternator replaced in the Tribute. I totally forgot about the CEL that was on for EGR Circuit. I've found a couple of pages ( OBD-II Trouble Code: P0403 Exhaust Gas Recirculation Circuit Malfunction ) that explain how to diagnose the issue but I was wondering if any other route for something that may be more common than another thing.
View 2 RepliesTouareg :: 2010 - Cruise Control Would Not Engage
I searched here, but could not find anything. My cruise control would not engage this morning. Worked fine yesterday on the way home. Of course the car just passed 30K Miles (now at 30,800) and will be out of warranty. I looked in the owners manual and could not find the number for the fuse and if it is in the right or left panel on the dash.
I will also check tonight when driving home if I can shift into gear w/o pushing the brake and if the green "push break pedal" indicator comes on or not when I try to shift into gear w/o pushing the break pedal. I read on this forum that this could indicate a fault in one of the switches at the brake pedal.
BTW, it's a 2010 Touareg with the 3.6L V6 and 30,800 Miles on it. So, what fuse to check??
Camry :: 2004 - Cannot Get The Cruise Control To Engage
I have a 2.4 camry with 1 big mystery. I can't get the cruise control to engage. I've tried everything, took it to toyota who put it on the computer, but nothing is showing, no faults anywhere, and i mean none, every switch for the cruise comes up as working fully and the light also comes on for it.
View 6 RepliesFord Escape / Hybrid :: Parking Brake / ABS And Traction Control Lights All Came On At Same Time
So a little while ago I had my parking brake, ABS, and traction control lights all come on at the same time. There was no change in performance, but they have been on ever since. I looked in to it online and a bunch of people said this was a common problem with damaged tone rings, so I checked them out, but they were fine (as far as I could tell anyway). So I scanned the vehicle using a buddy of mine's Snap On scanner, and it came up with the following code:
B1342 Faulty Control Module
We tried to check the fault code through Mitchell OnDemand but it said that this code was for a faulty Parking Assist Module. I don't have any kind of Parking Assist system on this vehicle however. I looked around a little more and this seems to be a pretty generic code for brake system faults with Fords. Also, if the control module for the ABS is the same one that handles traction control?
Ford Super Duty (1999-2016) :: 2000 F250 V8 Cranks But Won't Start - Cruise Control Will Not Engage
I have a 2000 f250, 5.4l triton v8 that cranks like crazy, but won't start. When I spray a little starter fluid in it it will run until the spray wears off. Brand new battery and full gas tank. it does have check engine light on dash, probably from the o2 sensor as the exhaust has almost completely rusted out. Also on a side note the cruise control will not engage.
View 6 RepliesPrius (Gen 2) :: Cruise Control Won't Engage - All Dash Lights Came On
I have a 2006 Prius and was just on vacation for two weeks and my Prius was stored in my garage. My wife just drove the Prius about 6 miles and all the dash lights came on. The car still drives, but the cruise control won't engage. A few months back I replaced the aux 12 V battery as it somehow died, so I don't think that is the problem. When the car is off, the aux battery voltage is 12.5 volts. When it is running the voltage is 13.9 volts.
I disconnected the aux battery and then reconnected it and all the problems went away for a while. Cruise control worked again, too. I just drove it a few more miles and it happened again and just as I got home to go up my steep driveway it would only go about 3 mph. Is that the "limp mode" I have heard about? What this might be? All the dash light are lit - red triangle, check engine, VSC, Brake System, etc. I am a newbie to this site, but I did a search and didn't find much that sounded like this problem. All the lights came on previously when my aux battery died, but the car wouldn't start, so this is somewhat different.
Elantra XD (2001-06) :: 2002 - Cruise Control Would Not Engage
My cruise control wouldn't engage this afternoon and once I got home I noticed that the brake lights including the third light are on. Headlight switch is rotated to off position, checked brake fluid and its normal, backed car up and hit pedal thinking something might have been locked up but to no avail.
View 4 RepliesHyundai - Sonata :: 2012 - Cruise Control Did Not Always Engage
Bought a Sonata Limited with 5500 miles on it from local dealership. Soon after I noticed that the cruise did not always engage. Problem is that when I brought it in for service, no one was able to duplicate the problem. What to do?
View 4 RepliesGolf V R32 :: Intermittent Cruise Control / Fails To Engage
My cruise fails to engage, sometimes first thing in the mornings, sometimes in the afternoon, cold engine or warm, fresh start or on resume. After the car is turned off for a few, something is resetting it and it then works fine. Wondering if this has something to do with a faulty switch, fuse, or whatever. I've tried the cruise switch on the stalk in turning it off for a while, keeping it pressed in, turning it back on, everything.
View 6 RepliesPassat (B5) :: Cannot Engage Cruise Control - Intermittent Failure On 1999 VW
I have a 1999 VW Passat that has a problem with its cruise control that two dealers have not been able to solve. Most of the time I cannot engage the cruise control. Other times it will work properly for 30 minutes. On a rare occasion, it will work properly for several hours. It does not seem to matter what type of road I am driving on. On the rare occasions when it works properly, it does not seem to matter if I stop the care and shut off the engine.
It appears is is there are times when it stops working that stopping the care and shutting off the engine is useful when I begin driving again. However, there is nothing consistent about when it fails, and when it again functions. The dealers have said little more than the cruise control is not working. One dealer installed a new break pedal sensor which did not resolve the problem.