Corolla / Matrix 2009-13 :: Traction Control Beeping
I've got an 09 XRS. Every time I slide it in a corner the thing beeps to tell me I've slid and the traction control (or whatever they call it) has engaged. I know I can turn it all off but sometimes I don't want to come to a complete stop and sit there holding the button for 5 seconds, I just want to drive and don't really care if I slide around and get "saved" by my car. This morning I was driving in about 6" of fresh pud (heavy snow) on the road and it was driving me nuts. All I really want to do is make it stop beeping, it keeps waking my wife up. Is it possible to shut the damned thing up?
View 8 RepliesCorolla / Matrix 2009-13 :: Cannot Find Traction Control Button
Alright so I have an 09 Corolla sport and cannot find the traction control button. I feel extremely stupid but I just can't find it..
View 2 RepliesCorolla / Matrix 2009-13 :: Traction Control Light Won't Turn Off
So I'm having a problem, which I'm pretty sure is the switch. The traction control light won't turn off no matter how many times I've pressed the button. The orange light is really annoying now and I need to get it fixed. What should I do?
View 1 RepliesCorolla / Matrix 2009-13 :: ABS / Traction Control / VSC Off Flashing - Brake Went On
My Abs traction control vsc off (keeps flashing) and brake light went on in my 2010 corolla....
View 2 RepliesCorolla / Matrix 2009-13 :: 2010 - Disable Traction Control For More Than Just A Few Seconds?
Here is the deal I have an autocross event coming up this weekend, and a 2010 corolla with traction control. How can I disable the traction control for more than just a few seconds? It is strange that when I hit the button after about 15 seconds the traction control comes back on.
View 12 RepliesCorolla / Matrix 2009-13 :: Manual Transmission - Noise From Engine Department
I have Corolla 1.6 dual VVTi (year - 2009.), manual transmission, 1ZR engine, for about a year, ~50000miles on clock. About a month ago from a engine part it began to produce sound that can be heard on the accompanying recordings.
for these sounds is characteristic that:
- can be heard only while driving and depressing a gas pedal, its not heard when I am changing rmps while the car is stationary..
-only when engine is warm
-from about 1900rpm to 3000rpm.
-Toyota service is not useful, they fail to locate the source of the sound.
I submit sound recordings that I made by placing a microphone in the motor department.
[URL] .....
What is causing this and is it dangerous to drive this car?
Corolla / Matrix 2009-13 :: Manual Transmission - How To Enable Auto Door Locks
How to disable the auto door locks but I have the opposite problem. Mine were not enabled and I would like them to be. Looking for instructions for enabling the auto door locks? 2010 s, no smart key, manual transmission.
View 14 RepliesCorolla / Matrix 2009-13 :: After Installing Cruise Control Horn Won't Work - Cruise Lights Up On Dash Borad?
I'm at my wit's end trying to install cruise control in my 2009 Corolla. I thought it was a relatively easy install, but then after putting the airbag in place, I find that the horn no longer works. I test out the cruise control, and the green "Cruise" lights up on the dashboard..but it doesn't actually work.
View 9 RepliesCorolla / Matrix 2009-13 :: 2012 Manual Trans Stalls From Takeoff Way Too Easily
I have a 2012 Corolla CE (base model in Canada) that is completely stock. Took delivery in Dec 2011. Manual transmission. I am finding the car stalls from takeoff way too easily. Have had many manual trans cars before, and have experienced nothing like this.
Can be driving around town all day, no problem, then pulling away from a stop sign or light, and bam, I stall it. The clutch is a at a good peddle position - not too low, not too high.
Taking off on hills is a bit of a nightmare. Will stall easy there too. So I have to over-rev it to make sure I pull away from any stopped position. Passengers have noticed and said, "What are you doing! And I have to explain that if I don't over-rev from a takeoff, it may stall.
Case in point: at a car wash, aiming into the wheel slots to get into the track, at a very slow crawl in 1st and the car encountered resistance when the front tire rubbed the guide, and bam, it stalled.
After 7 months of driving this Corolla, I still can't get the hang of the clutch !! Does it sound like something is not set up correctly? What to check. Basically, it looks like I can't drive a standard.
Corolla / Matrix 2009-13 :: Upgrade Wiper Control In S To Variable Int
Is it would be possible or easy to upgrade the wiper control in the S to the variable int. wipers in some other models? I tried doing a search but I didn't see this subject ever being brought up.
View 14 RepliesCorolla / Matrix 2009-13 :: Temperature Control Cable Broken?
I have an 09 Corolla S. Back before winter, my heat control knob got real tight and felt like it broke loose inside one day. This left the heat control stuck in the red somewhere. Its way too expensive to have this fixed at Toyota. I ordered the heat control panel off Ebay, went to replace it yesterday, and it turns out the actual cable must be broke at the other end. When I tried to rewrap the cable around the knob, it has no tension and pops right back off.
My question: where this cable connects to on the car? How hard is it to replace and where do I find one?
Corolla / Matrix 2009-13 :: How To Replace The Climate Control Bulbs
how to replace the bulbs in a 2010-2013 Toyota Corolla I am finding older Corollas but not 2013. I did tear apart the dash but it look like they are now a self contained unit.
View 3 RepliesCorolla / Matrix 2009-13 :: Vent Control Knob Is Not Working
Recently the control knob is not working. No matter what position I select it to, it comes out the top Vents. I took it to the dealership And they said the cable is severed and would cost around 700 to replace it. I was wondering if the cable is one like a rod that pushes the controller or if it is digital. Also I was wondering if I could just the middle of the dash to get to it or would the whole dash have to come out. I could do it myself if I can get to it from the middle.
View 2 RepliesMazda - Mazda3 :: 2009 - Check Engine And Traction Control Lights On
I've got a 2009 Mazda3 hatchback, 31,000 miles. As I'm sure you know, it's very cold in the Northeast today. It was -12F on my drive in to work! I went out to lunch with a coworker today, and it had warmed up quite a bit to about 25F. As I was driving back to work - 40mph on a dry, straight stretch of road - my check engine light and traction control/stability control light came on. They aren't flashing, just steady. The traction control light will flash if I hit a particularly bad patch of slush, but it's never lit up on a dry road before.
Right after the light came on, the automatic transmission started feeling...funny. It was shifting hard, although downshifting felt okay. My coworker even noticed before I said anything. I don't think it was the traction control - it was specifically as the automatic transmission was shifting, not at any other time. I've read through the TSBs and didn't see anything relevant, and I've already made an appointment for tomorrow at the dealer. I've only got 5,000 miles left in my warranty so I'm a little nervous - the car has been terrific so far.
I would think the traction control light would be unrelated to the transmission, so I'm a little confused. Also, just to rule out a few other things - the last time I got gas was about a week ago and I still have a third of a tank. I don't think this is a gas cap problem or frozen gas, both of which I've experienced before (in other cars).
Corolla / Matrix 2009-13 :: Check Engine On With Stability Control Flashing
So today I start my car, I get the check engine on (steady not flashing) and have stability control flashing with my traction control light on. I found out it could be the gas cap not on right so I removed it and screwed it on again, check engine light was still on though. However, after starting the car again after a drive it was gone .
I do turn off stability control sometimes if it's nice out?
Corolla / Matrix 2009-13 :: Remote Control Don't Detect Long Distance
I had recently purchased a 2010 S used corolla , its a very good car but i'm facing a problem with my remote control , i have to get very close to the rear window so it responds, I had change the battery of the remote but problem still exists.
View 3 RepliesCorolla / Matrix 2009-13 :: Heater Knob Control Bulb Replacement
We have a 2010 corolla S and the heater knob control bulb is gone. How do I replace this?
View 1 RepliesCorolla / Matrix 2009-13 :: 2011 - ASWC Steering Wheel Control Unit?
The song/radio station will automatically switch on its own randomly without my intervention.
I emailed the company, and they said to have me ground the unit to the chassis (had it grounded to same ground as aftermarket Kenwood radio), which I grounded it to the factory radio bracket screw (didn't change anything). I am using the 8011 Metra harness, which they said works for 2011 Corollas.
They suggested using the harness that comes with the unit (which you would need to splice into factory wires to do, messy, undesirable, did not do).
So far, what I've done was replace JUST the control unit with a new one, and now it is less frequently switching (1-3times every other 45min car ride, as opposed to 1-3times each car ride). So the frequency is much, much less, but still occurring.
The company suggests trying to replace the harness with another 70-8114 harness (have not done).
What else could be the cause? I was thinking about putting aluminum foil over the unit to stop interference. .
Corolla / Matrix 2009-13 :: 2010 Cruise Control Installation Different Than 2007 Vehicle?
I installed an aftermarket cruise (Rostra) in my manual 2007 Corolla. Other than cutting the hole for the stalk the only real difficulty was getting my fat hands up under the dash to install the clutch disconnect switch. It certainly didn't involve any wire cutting or messing around with the ECM.
It's a long story, but through a sequence of events I have to opportunity to buy a 2010 base Corolla 5 speed at a pretty good deal. It also doesn't have a cruise control. I went tot eh Rostra website just to make sure cruise units are available and I looked at the installation instructions. Unless I read the wrong sheet, their instructions make it seem like installing cruise on a 2010 involves messing with the ECM wiring harness, moving connectors and a bunch of scary stuff like that.
It seems strange to me that the older car would be "plug and play" but a newer one would need changes to the main wiring harnesses. I'm not talking about a steering wheel mounted system where the clock spring has to be replaced, just a basic cruise.