Corolla / Matrix 2009-13 :: New Brakes Rotors And Pads - Grinding Noise When Turning
I performed brake maintenance today with my brother on my 2010 corolla CE, my front rotors were warped and my pads were used ( and also uneven) and I replaced both front rotors and pads.
The install went smoothly, my brother changed a couple of brakes sets and knew what he was doing and showed me up.
Took it for a spin, the brakes work very nicely ( i bought the ceramic wagner bundle ) but theres a slight grinding noise when driving, like the pads are touching and rubbing a bit too much on the rotor, but the driving is unnafected. Also, there's a sqealing noise coming from either side when you turn only.
Braking itself produces no noise whatsoever, only when you turn that it squeals.
Corolla / Matrix 2009-13 :: Hissing Noise After Brake Pads Changed
I changed out the brake pads, now it is making a hissing noise. I bled all the brakes starting from the back. Here is the video : [URL] .....
View 2 RepliesCorolla / Matrix 2009-13 :: Car Will Shift Straight From Overdrive To Second Gear
I have an issue, and I think the answer is to drain and fill the transmission fluid a few times. I have an automatic 2010 S with 87,000 miles. I did a drain and fill on the transmission fluid about 15,000 miles ago - just a single drain and fill.
Here's the issue. Normal driving down the road, everything feels and shifts great. However, if I'm rolling along and then floor it wide open, usually the car will shift straight from overdrive to second gear. If the car downshifts only one gear, like from OD to 3, or 3 to 2, it's nice and smooth. However, in the situations described above, if I really nail the throttle, I get a hesitation and a very rough shift almost every time from OD to 2. That said, if I'm going down the highway and know I'm going to need second gear to pass someone and I shift it into second manually while accelerating, it's smooth with no issues.
I looked at the fluid the other day. It's a little over filled on the dipstick and it's a dark red. Not brown, but it's definitely overdue for some TLC. I'm just wondering if the symptoms are classic for two or three back-to-back fluid changes or if this is a sign of a larger issue.
Corolla / Matrix 2009-13 :: 2011 Transmission Shift Hard From First To Second Gear?
My Toyota corolla 2011 started to shift a bit hard from first gear to second gear and sometimes it feels a bit like choking since November of last year after I started to commute about 38 miles to work. It happens when I am taking off and going straight and it doesn't happen when I am turning left or right. I have taken it to the dealer once, they reset the transmission computer, but it still felt the same and the way the other gears shift felt a bit differently.
I have seen a similar complaint about the same issue of gear shift from first to second in the NHTSA website and another forum with the same issue with a 2009 corolla with a seemingly loose motor mount.
Corolla / Matrix 2009-13 :: Auto Transmission Stay In 3rd Gear And Not Shift Into Overdrive Until Warmed Up
Why does the automatic transmission stay in 3rd gear and not shift into overdrive until it gets warmed up? It is so annoying. This is the only car that has ever done this. Even the camry I don't think does this. Especially the fact that the rpms stay above 1k rpm until the engine is warmed up.
View 7 RepliesBMW - 328 :: Changed Front Pads / Rotors - Steering Wheel Shimmy
Have a 2009 BMW 328i with 78,000 miles. In the last year, the front brake pads and rotors have been replaced by the dealer 3 times, each time because of "warping" which is their diagnosis of a steering wheel shimmy (left to right oscillation) that occurs under light to moderate braking, especially at highway speeds.
The strange part: replacing the rotors and pads seems to solve the issue, but only for a few hundred miles.
I am led to conclude that something is causing very accelerated uneven deposition of pad material to the rotors - but what could it be? Suspension components and bushings have been inspected and check out. So do calipers. Recently completed: four wheel alignment, wheel rounding and balancing did not solve the issue. One dealer will no longer look at problem until "all four tires replaced" - but tires look fine, they are OEM RFTs with about 4/32nd's of tread left. Car seems fine cruising on highway - steering wheel shimmy only occurs under braking.
Kia - Sedona :: 2006 Won't Shift Into Reverse And Is In Limp Mode / Only Staying In 3rd Gear
Should we go to a transmission specialist or a regular shop for our issue? 2006 Kia Sedona - won't shift into reverse suddenly and is in "limp" mode, only staying in 3rd gear.
My concerns are primarily getting it done correctly and as cheaply as possible. I've read that the issue could be an input or output solenoid or maybe having to get a full on re manufactured transmission instead. But the consensus appears to be having it properly diagnosed.
So my question is, will the local shop around the corner who is pretty good with most repairs be able to properly deal with this? Or am I better off skipping them and going to the specialist?
Corolla / Matrix 2009-13 :: How Good Is Ceramic Brake Pads
i have a 2010 Corolla XRS and was wondering the following:
-How good are ceramic brake pads?
-Do they last longer than normal OEM pads?....under normal driving.
I was considering buying a complete set of drilled rotors and ceramic pads for my car.
Corolla / Matrix 2009-13 :: Rear Brakes Pads Sticking / Wearing Quickly?
At about 25,000 miles I had one of my rear brake pads sticking so had to change the rear brakes. The non-stuck pads on the other side looked decent still, so I'm assuming I'd have gotten quite a few more miles out of them if the one hadn't been sticking. Changed the front pads at about the same time, although they were in pretty good shape still (but it was taken apart already, so did them while it was apart and the chance was there). At about 50,000 miles later the rear pads are again unevenly (and I feel perhaps prematurely?) worn, and the fronts look fine. Is it something with the screw-type e-brake mechanism on the rear disc brake that lends itself to sticking? Or am I just especially unfortunate?
View 10 RepliesCorolla / Matrix 2009-13 :: 2010 - Metallic Pads Cause Premature Pedal Shudder?
I bought my 2010 Corolla 5 years ago with 17,000 miles on it. Since then I've put on about another 46,000. With 63,000 miles it needs it's 4th set of rotors due to brake pulse and shudder. We live in the prairie and I'm not hard on brakes. The brakes have never felt like my 05 Corolla.
Can this be caused by too aggressive of brake pads?
Toyota - Corolla :: Metal Grinding Noise - New Pads Resurfacing When Replacing Rotors?
I replaced my pads 3 months ago. Now I have a metal grinding sound (not squeaking). The mechanic says I need new rotors, and he will resurface the pads. I know I can replace the rotors myself; but do I need to resurface the 3 months old pads? If so; how will they resurface them?
View 4 RepliesCorolla / Matrix 2009-13 :: Shift To Neutral While On Stop Or At Stoplight
Is it ok to put it on Neutral while I'm on stop, stop light, etc. while the engine is running? I have an Automatic....
View 8 RepliesFord F-150 (2009-2014) :: 2011 - Replaced Rotors But Pads Still Shaking
I've got a 2011 XLT. The front rotors have been turned twice already in 39k miles. Once at 12k and again around 24k covered under warranty. It starting having vibrations on the highway and shuddering when braking again around 36k. Tired of dealing with the OEM rotors and told it would no longer be covered under warranty I went to Autozone and got duralast rotors and pads for the front.
Swapped them out Friday
- took caliper off
- removed pads
- took caliper bracket off
- swapped rotor
- opened bleed valve to push back piston(used a vise/c clamp combo)
- closed valve with piston under pressure
- put in new pads
- placed caliper bracket back on
I did not remove the pins, they seemed to slide fine and the remaining hardware still looks fairly new.
Took it out all was good, bedded the brakes a bit and called it a night. Come out this morning and start to head out and it's shaking like crazy now once above 40 mph. Made it back this afternoon and took the passenger side off and its not making full contact with the rotors. I've read this can be common until the pads are broken in. Driver side appears fine, pads appear to be bedding fine and nothing looks out of the ordinary, I took the caliper back off but had to open the bleed valve to get it loose enough to let go of the pads.
I've even taken the passenger side back off and reset the piston again just to make sure.
Put everything back together and take it for a spin. Truck seems worse now even at slow speeds 25-50mph. Once the brakes start getting hot from stopping the shaking goes away. When the brakes start cooling back down it comes right back.
Going to swap back the OEM rotors and retest in the morning. Will take the new ones back If that puts it back to normal I may just replace with OEM ones then. The brakes work perfect it's just the shaking that I can't seem to figure out.
Anything to check? It seems like the new rotors are warped
Corolla / Matrix 2009-13 :: Tips On Removing OEM Auto Shift Knob?
just got my new 2012 Corolla S AUTOMATIC and want to see if this knob will fit my shifter. Any tips on removing the OEM auto shift knob? URL...
View 5 RepliesCorolla / Matrix 2009-13 :: Found A Red Light Blinking By Shift Knob
Woke up this morning and found a red light blinking by my shift knob. It was the passenger air bag. There was a lock on it. How come its doing that? My car is turned off. Could there be a problem with my air bag or was it just a code?
View 3 RepliesCorolla / Matrix 2009-13 :: 2nd Gear Has No Go / Bogged Down?
Having an issue with 2nd gear in their automatic trans. I find that 1st pulls great, but then it shifts and just feels bogged down until it gets out of 2nd, and then it feels free again in 3rd and 4th. Wondering if this could be a problem with the transmission itself or if it just needs the shift points re-tuned?
View 2 RepliesCorolla / Matrix 2009-13 :: 2011 - Grinding In Third Gear And Sometimes 4th
So the grind in 3rd gear is getting pretty bad. I have to put it into third slowly and 4th sometimes grinds a bit. Could it be the slave or master cylinder?
View 8 RepliesCorolla / Matrix 2009-13 :: RPM Drops Twice When Shifting From Second Into Third Gear
2011 Corolla S 1.8L 4 speed a/t
I have noticed that when my car shifts from second into third gear at around 50 km/hr that the rpm drops twice. It shifts (almost seemingly to a 2.5 gear) and the rpm drops and then a second later it's like it shifts again and the rpm drops again, is this torque converter lock up I am experiencing?
This also usually happens when I give it light throttle and not when I am heavily accelerating.
Corolla / Matrix 2009-13 :: 2010 Car Rolls While In Gear?
I have a 2010 Corolla S that I bought new. It has a manual transmission, 19k miles and I have not had any problems until recently. Let me start by saying I've been driving a manual for over 20 years so I know how to drive them.
That night, in 1st gear it rolled out of my driveway. My driveway has a mild incline that the car has been parked on for a year this way with no problems. When I went to pull it back on it gave me trouble starting as if the starter got stuck but did not engage with the motor. Once started I pulled it back on and noticed that every few seconds it rolls back a couple inches then stops and holds for 15-20 seconds then rolls again.
It does this until it finds a flat spot to land on. Everytime its parked on my driveway now it wont stay there. Now before you tell me to use the p-brake, which by the way is the dealerships solution, let me remind you that the car has been parked in this spot everyday for a year with NO issues until last week.
Since this started I've been using the p-beake but I want to know why its doing this all of a sudden.