Volvo - S40 :: Valves Tapping Noise When Reach About 2200 Rpms
I have an 06 volvo s40 with a 2.4l non turbo. When I reach about 2200 rpms I hear the valves tapping. When I put the car in park and rev the motor up the valves don't make any noise. Where to start.
View 6 RepliesHonda - Odyssey :: 2006 - Valves Making Chattering Noise For A While
I have a 2006 Honda Odyssey with 40K miles. The valves have been making a chattering noise for awhile now. I have tried different brands of gas (highest grade) - no luck. I took the car in to the dealer while it was still under warranty they could not find anything wrong. I took it again lately and they said not to worry. It seems like some sensor is not functioning properly but I could be wrong.
View 18 RepliesEscort :: 99 Ford With 2.0 SOHC Engine Making Tapping Noise Intermittently
I have a 99 ford escort with a 2.0 SOHC engine and for the last week or so it was making a tapping noise but it was intermittent. Today, I revved the motor up slightly and it started making this horrible clanking noise and then it stalled out. I tried starting it up and when it did start to run, it made the same clanking noise then it shut off. I tried to start it up and it wont even turn over. Its acting like it seized up but I am not sure if its in the top end or the bottom end. Now I know the CVH engines are notorious for dropping valve seats but I am not sure how to diagnose it if that is what happened.
View 6 RepliesCamry :: 2010 2.5L - Noise On Top End / Loud Valves
Sometimes when I start my 2010 camry with the 2.5L, it makes a noise on the top end like there's no oil and the valves are very loud and a second or 2 later it goes away, is this normal....
View 1 RepliesCamry :: 2AZ-FE - Tapping Noise Under Load
YouTube ....
Not my car in the link but it sounds very similar (can be heard better 4 seconds into the video). Noise only under load, in Drive and in Park, does not go away when warm. Definitely coming from cylinder 4 after removing spark from each cylinder to test. 152k miles. Drives excellent, no loss of power, no vibrations, no codes. Just purchased car. In excellent condition and price was right, so decided not to pass on it. I'm also in the auto repair field, so fixes dont cost me an arm and a leg
Would too much cam lobe clearance cause this loud of a noise? and would valvetrain issues cause a noise only under load? I just read on the complexity of doing a valve adjustment on these engines. Removed the valve cover and saw nothing abnormal or no significant signs of wear
Any other common taps/knocks/noises associated with the 2AZFE?
This is my first ownership of a vehicle with the 2.4, and am surprised to see all the reports of failed engines and at not even very high miles. I thought it was more reliable.
Jeep - Grandcherokee :: Valves Making Noises After Oil Change
Recently I had my oil changed (do it every 3500 miles) . Normally I do not drive many miles per day, but about 5 days after the change I noticed my valves making a noise... I thought it was a stuck lifter....put in some mystery oil...all was fine until I again noticed the clacking lifter after driving 15-20 miles highway....I then checked my receipt from the oil change and it showed they installed .5w30 not the 10w30or even 5w30 weight oil recommended. I took my jeep to another place and had the oil changed again with 10w30 oil and all is fine now...my question is... I drove with the .5w30 oil for about 6 weeks and 800 miles... did this potentially damage my engine?
View 14 RepliesCamry :: 2007 Toyota - Loud Tapping Noise While AC Is On
In my 2007 toyota camry, 4 cyl, W/ 120K miles, I have loud tapping noise while the A/C is on. Noise is only heard when the car is idling or when coming to a stop light. No noise when A/C is off.
Its sounds like the tapping noise is coming from top end of the engine. Engine shakes also while noise is present.
To me it sounds like piston slap which I am going to try to isolate it by running high octan gas. Personally I don't think its piston slap.
Maintenance stuff done: ireduim spark plugs, air/ cabin filter, drive belt, water pump @ 60K, oil change every 5K.
Problem 2: Also is there any fix for Radio AUX noise in speakers beside Toyota TSB on it. Getting electrical noise in the speakers through cellphone when its charging through car power outlet.
Camry :: 2.4L 2008 - Tapping Noise While In Gear And Stopped
My car ( 2.4L 2008 Camry ) is making a tapping noise while in gear and stopped. If I rev it slightly, start moving, or move it out of gear the noise will go away.
I was able to trace the noise to the hard pipes attached to the radiator for the transmission cooler. In particular the ~6in one that runs towards the center of the radiator.
A part of the body directly below the hard pipe was slightly bent up and hitting the hard pipe.
A quick way to verify this is the root cause of your noise is by getting a buddy (or chocking) the wheels with parking brake engaged then put the car in gear and manipulate the radiator. Be very careful when doing this I am not responsible for property damage or bodily harm due to this troubleshooting technique.
Pressing down on the top rubber isolators or putting some pressure on the fan shroud should stop the tapping noise.
On my car I persuaded the metal and added some foam strips to prevent to noise. If I press down on the radiator it sometimes will comes back. If this bothers me more I will need to pull the radiator and do a more thorough examination.
Camry :: Flexing / Tapping Noise Coming From The Sunroof
I bought a used 2006 Toyota Camry Sportivo from a local Toyota dealership not too long ago. Unfortunately, when I bought the car I also bought a flexing/tapping noise coming from the sunroof with it. I believe the problem here lies in the fact that the back right hand corner of the sunroof appears to have a little more play as opposed to the other side which causes a flexing/tapping noise when driving the vehicle. Toyota had the car for nearly to weeks to fix the problem, however, when I picked up vehicle it appeared that they had only lubricated all the moving parts, but not fixed the problem. The sunroof is factory fitted, so I do not think it should be making that kind of noise.
View 5 RepliesCamry :: XLE V6 - Tapping Noise When Engine Is Not At Normal Operating Temperature
I have a 2003 Corolla with 178K miles and a 2007 Camry V6 XLE with 30k miles. Both make a tapping sound when the engine is not at normal operating temperature (when the engine is still cold during the morning). I've changed the oil regularly on the Corolla with 5W-30 oil every 5k miles. I'll be making my first oil change on the Camry in about a 1 week.
The tapping noise goes away once the engine gets warm. Is the tapping noise normal? I don't hear this noise from our Honda Odyssey, which uses 5W-20). Can using a different weight oil work?
Camry 2012+ :: 2014 - Chirping Noise When In Gear / Tapping On Gas
So i just had my torque converter recall done yesterday but before that happened i told the dealer that iv been experiencing a chirping like noise when in gear and when tapping on the gas. It's very quick and goes away once i ease off the pedal. Anyways they told me it could be the transmission. Mind you i had my car for a year. I bought the car brand spankin new and currently have 19,000 miles. All they said was oh hey come back if you still have that noise which i do. So im thinking they didn't even look into it because its pretty obvious the noise it makes. Im wondering what this could be?
View 9 RepliesCamry :: 2010 - Top Of Engine Emits A Very Fine Tapping Noise On Idle
Anyway, I recently purchaced (as a 2nd car to the near indestructible 95 camry) a 2010 Altise, 4 cylinder 2.4L engine with multi-point fuel injectors. Runs like a dream, purrs like a kitten, can't fault it.
However, I have noticed that on idle, the top of the engine emits a very fine tapping noise, not majorly prominent, but enough to notice with the hood up and wonder if it's a potential problem.
Have been told that it could just be the multi point injectors, but I'm more concerned that it's a valve / oil pressure thing. No oil warning lights or anything like that appear and oil level is good. Service logs are up to date with last service under warranty being January this year.
Camry :: Light Banging / Tapping Noise Coming From Intake Manifold Area
I have a 2003 Camry 4 cyl. around 60,000 miles on odometer and for around 3 months the engine seems to have gotten louder while at idle. At the back of the engine around the plastic intake manifold area the engine is making a light banging / tapping noise. It never made this noise before. The engine idles fine and the drives normally. I always keep an eye on the fluid levels and they are up to par. I'm not sure what is going on and if I should just keep an eye on it. I have provided a link below to a video of the noise. The noise can be heard best starting around 15 seconds into the video and fades away around 26 seconds into the video. [URL] ....
View 1 RepliesCamry :: 2003 - Light Banging / Tapping Noise Coming From Intake Manifold Area
I have a 2003 Camry 4 cyl. around 60,000 miles on odometer and for around 3 months the engine seems to have gotten louder while at idle. At the back of the engine around the plastic intake manifold area the engine is making a light banging / tapping noise. It never made this noise before. The engine idles fine and the car drives normally.
I always keep an eye on the fluid levels and they are up to par. I'm not sure what is going on and if I should just keep an eye on it. I have provided a link below to a video of the noise. The noise can be heard best starting around 15 seconds into the video and fades away around 26 seconds into the video. [URL] .....
Mercury - Grandmarquis :: 1997 - Interior Lights Staying On / AC Making Tapping Sound Behind The Dash
I've been having a problem with some of the interior lights staying on and killing my battery each night. The lights that stay on are the climate control lights, gear shift light, and the lights on the door for the windows and locks. Every time i have to crank up i have to get it jumped off. If i pull the fuse out for the tail lights i no longer have the problem. I was wondering does it have something to do with the lighting control module or maybe the headlight switch.
I also have been having a problem with the a/c making this tapping sound behind the dash. Even with the a/c off you hear this constant sound as long as the car is on. I have no clue what is going on...
Camry :: 2007 - Shock Making Noise
Watch the video to hear what I'm talking about ; [URL] ....
View 7 RepliesCamry :: Making Scraping Noise From Right Rear Brake
I have a 6-cyl, 2000 Camry that is making a scraping noise from the right rear brake. After driving it for a while I put my hand near the rotor and it was hot. The other side wasn't. I changed the pads and rotors yesterday and it's still making the noise. I'm guessing that there's something wrong with the caliper. Do I need to buy a new one? Can I rebuild the current one?
View 6 RepliesCamry :: 2007 Making Noise From Rear When Accelerating From 0 To About 10-15 Mph
This is going to sound odd but here is the case: When accelerating in car from 0 mph to about 10-15 mph there is a noise coming from the rear. It sounds as if it is coming from the axial or something because it does it once every revolution. But the wierd thing is is that it does it louder when it rains or any moisture is in the air!
We had back right bearing replaced. But still makes noise. Don't think it is rock or tire because it only does it sometimes when speeding up. And does it very loud when raining or humid
Camry :: ALT Making Bad Whining Noise - Slowing Down Engine
My ALT is making a bad whining noise and when I disconnect it, the noise stops. it also seems to be slowing down the engine if that's possible.
The batt voltage is the same with the car running or stopped. no cell, batt idiot light comes on at startup and goes off like the rest of the warning lights.
This is the 2006 2azfe 4 banger.
I believe its gotta be a diode pack shot. Is it difficult to replace the pack or should I just get a rebuilt one? The Haynes doesn't show how to disassemble the alt and replace anything but I should be able to do it. would I also need to replace the brushes at the same time?