Sonata I45 (YF - 2011+) :: Rear Sway Bar And Links Installation
I just installed rear sway bar & links, this made a world of difference in the way the car handles as soon as I made the first turn I could feel the difference in the car it definitely corners flatter, the install only took about an hour did it in the driveway on ramps, I installed the kia sway bar 555102T000 the bar is 18.3 mm while the stock one is only 15mm I included some pics...
View 8 RepliesPassat (B5) :: After Sport Spring Installation Getting Rattling Sound?
I had no rattling before H&R sport spring install but now it's coming from what sounds like the top of the strut when I go over small bumps at slower speeds. All bushings and ball joints etc. are new . It's like a clunking banging noise?
View 2 RepliesPassat (B6) :: Suspension Makes A Air Squeak Sound After Spring Installation
after I had my springs installed I noticed this air sound when I go over bumbs. is this normal.? if I upgrade my shockts to aftermarket will they make the same sound?
View 9 RepliesGolf/GTI VII :: After Installation Of Lowering Spring Hearing Popping / Banging Over Large Bumps?
I installed H&R lowering springs this weekend and now the suspension is making quite a bit of noise. I've double and triple checked the installation, and this isn't my first rodeo, so I don't think anything is improperly installed.
I'm hearing popping/banging over large bumps. I do believe that the noise is most noticeable when my tires drop off into a pothole and the suspension is unloaded. I think the noise is caused by the suspension being uncompressed and then the coils of the springs either hitting themselves or hitting the top hat.
Experienced excessive noise with the H&R springs? I think my next course of action is to get some spring isolators and see if that stops the noise.
Camry :: 2010 - Rear Suspension Has Knocking Noise
Checked rear strut they look good but lower control arms look like they were not held straight when tightened could that make knocking noise just bought the car has air ride all bushings look new.
View 3 RepliesFord Super Duty (1999-2016) :: 2011 F250 - Knocking Sound From Rear Passenger Side Cab Corner
Just became the proud owner of a used 2011 F-250 Supercab, 6.2L. Overall the truck is great but it does have a-few things that need fixing, the most annoying of which is a knocking sound from the rear passenger side cab corner. Sounds like the exhaust vibrating and smacking up against the floorboard but that's not it. Everything seems tight, even the front suspension.
The only thing I can see that may be the cause is the rear passenger cab mount seems worn. I can rotate the bottom rubber portion without too much effort and when I feel for the top rubber portion all I feel is the metal cup on the top, like the rubber has collapsed and the metal cup is sitting directly on the frame mount.
So... how many cab mounts there are for the Supercab? I think there are two on each side and two in the front. All of the information & videos I've seen describe the locations for the crew cab. Also, is it possible to replace the cab mounts and not have to mess with the ones in the front? I hear those are the real buggers.
Camry :: 2004 - Knocking Sound Coming From Passenger Rear At Low Speeds
I had to replace 2 tires on my Camry recently and Discount Tire put the new tires in the back and the old tires in the front. After all was done, I drove off and there was a knocking noise coming from the passenger rear.
The front steel wheel was pretty beat up so it was making the steering wheel shake. Discount put that wheel in the back. They had recommended replacing the wheel. I picked up a new one from a pick and pull and its still making the knocking sound.
I went through the car's interior to try and eliminate anything rattling around making the noise. Checked the trunk and there was nothing that I could think it would be.
It knocks at low speeds from 5 mph all the way up to 40 mph. But once I get to 50 and over on the highway the sound goes completely away. The car does not ride rough or shakes when the sound is present.
Camry :: Low Rattle / Knocking Noise Coming From Rear When Hitting Bumps
I would describe the noise as a low rattle/knocking when i hit bumps(or the second after). i thought it might be my spare tire knocking around in its trunk well under the carpet. I actually removed it and drove around to check, but it was not the issue. I had a mechanic look at wheels/suspension because of this noise, he told me the rear passenger side sway bar link needed to be replaced. I personally ended up doing the work and replaced the right and left rear sway bar links however the noise persists.
while the rear was jacked up i tried wobbling the wheels with my hands to check for play but found nothing in any direction. The mechanic seemed to think everything else looked ok.
I only notice it at low speeds like driving around a neighborhood. The big bumps it either isnt happening or the noise is drowned out by the general sound of hitting larger bumps. But over mildly bump sections such as a bad asphalt patch chop it can be very noticeable.
Its not very consistent, its hard to predict when ill hear it and its almost like its during when my suspension settles after hitting the bump that its heard.
Camry :: 2009 Toyota - Knocking Noise From Rear Side When Hit Bumps
I have a 2009 Toyota Camry. I started hearing this knocking noise(really loud pop) from the rear. I have read the TSB's about a knocking noise coming from the "Spring Bumper" from the strut assembly and they are all facing the correct way. And there was also a TSB for a knocking noise from the "Roof Structure." The dampening bonds come apart and makes a knocking noise. I've replaced a strut mount in the right rear and that did not fix the problem.
View 4 RepliesCamry :: Knocking Noise On Passenger Rear Side - Coilover Leaking Oil
So recently I started hearing a knocking noise on my passenger rear side of the car... I suspected my coilover and sure enough I took the wheel off and there is oil all over the shock/spring.. How to rebuild k sport coilovers?
I assume I have to replace the entire shock? I've had them on for about 1.5 years so I'm not too thrilled about the life of the shocks. I'm not sure what the normal life expectancy of coilovers are since my last car had air ride which actually was fine for 6+years.. But I was hoping it'd be more..
Passat (B6) :: Knocking / Popping Sound After Installation Of Coilover
I recently installed solowerks s1 coilovers and now I get this knocking sound coming from both front wheels. This only happens while turning at low speed and stops once I get past 30mph. Also there sounds like a rattle or clanking when going over bumps in a straight line. These 2 sounds are completely different. From what I've researched, I think the problem is broken top strut mounts. I wanted some second opinions on it before I buy the strut mounts and get in there.
This video shows you the noise when I turn the wheel side to side while parked.
{URL}
Camry :: 2011 SE - How To Take Out Rear Seat
I have a 2011 camry se and i need to know how to take out the rear seats. I'm trying to put seat covers and i want to take out the bottom part so i can strap it tight. When i lift it up i can see two hooks.One hook i got out a while back when i just bought it but i cant do it anymore.i don't want to pull on it too much and risk ripping the seats.
View 9 RepliesGolf/GTI VII :: Spring Binding Popping Noise After Neuspeed Race Spring Install
This noise I have is driving me crazy, installed neuspeed race springs and now I have this weird spring noise, sounds like the springs are binding and then releasing when you turn the wheel, like a clicking dinging noise, it's on both sides and happens when moving slow and turning the wheel and when stationary and turning wheel, it sounds like tug and release not really spring bind I checked install and everything is correct even disassembled bearing assembly and everything is fine, lubed spring seats with silicone paste nothing is working.
When looking at the spring and turning wheel it's almost like the spring is getting stuck on the middle part of the seat then releasing, I know this was a common problem on the mk6 but I haven't heard anything about the mk7 the spring is seated in the lower perch perfectly the upper is were the noise is coming from you can see as you turn the upper bearing by hand it actually somewhat twists the spring and then releases and that's what makes the noise, and it dose not move in a nice circular motion kind of like an egg shaped rotation and it makes the spring flex and pop I think there's a problem with the springs,
Ford Super Duty (1999-2016) :: 2003 - Clock Spring Has 8 Spring Wire?
Adding cruise control to F350 XL I just bought. I got a steering wheel with the buttons. But I am having problems with the clock spring. Mine has an 8 wire plug with only 6 pins on the big plug and all of the clock springs I have found have only a 6 wire plug for the big one. Without changing my clock spring I have no where to plug in the cruise wiring. All have been for right year model with cruise and even tried different years but none will plug in under the dash.
View 3 RepliesFord Super Duty (1999-2016) :: Conversion Of Leaf Spring To Coil Spring?
Conversion from the dana 50 to the newer dana 60 with coil spring? My Dana 50 has called it quits so while my front end is already off the vehicle already why not make improvements. Ford used the 50 for 1999 to 2002 then upgraded to the 60, I'm guessing it was for a reason!
I've read this article on a similar project but the dana 60 had leaf springs as well: Dana 60 Conversion for F250 years 1986-1996 .: Articles I'd prefer coil spring, nothing more then personal preference with a bit of better ride quality. The donor vehicle is a 06 SRW F250 This is not what I'll be getting but just as an example of the parts I would get.
Ford Fuel System :: Gas Line Spring Lock Coupling - How To Release Garter Spring
I hope i don't give the impression on my very first post that I'm a total retard......but ...I can't figure out for the life of me how to get those spring line coupling apart! I've removed the clips...but it just won't pull apart. Is there a tool to release the garter spring?
View 4 RepliesCamry :: 2011 - Rear Dash Rattles / Vibrations
Own a gen 6 or 6.5 carry so that has the huge rear plastic dash? I currently have 2011 set with the jbl system and every single time I bump some music at like volume 26-27 my rear dash rattles like crazy from the dash and my bass is at 0/5. it's driving me crazy.
View 14 RepliesCamry :: 2011 SE - Clunking In The Rear Of Car While Driving On Bumpy Roads
Just recently I've noticed clunking in the rear of the car while driving on bumpy roads, on semi-smooth roads the clunking barely happens. I jacked up the rear of the car today to check for broken brackets/bolts/ect. and found nothing. Re-greased the sway bar bushings and tightened down the endlinks a tad (part where it attaches to the sway bar, the top ones look tight but didn't check. ). Cant seem to find anything wrong. The car is 40k miles, had tein solara springs since 3k miles, got the 23mm ur racing sway bar put in at around 15-20k miles, and then bc coilovers around 35k miles. My best guess is that the rear endlinks are done and need replacing.
View 2 RepliesGolf IV R32 :: Loosen Sound - Rear Spring Collapsing?
I got bilstein PSS9's at waterfest this year and it has been on my car for approx. 7k miles and I think I am experience the problems that people say about the rear spring collapsing. Whenever i drive on a bumpy road, it sounds like something is loose in the rear specifically the drivers rear. I thought it was the heat shield but i had that tightened and the sound is still there. My rear end is not even lowered alot. I turned the coil about 1-2 times. the front is even lower than the rear. I don't know whats up but its frustrating me. I also have 20mm spacers in the rear, would that have to do anything that is causing this sound.
View 16 Replies