Camry :: Gas Pedal Not Responding Code P2119?

This car had this problem about 4 years ago when my father in law owned it He had the dealer fix it and they replaced the gas pedal assembly i checked that and it is ok if i shut off the car and restart it the pedal works fine or about 15 seconds then back to idle

View 2 Replies

Vandura :: 1995 - Gas Pedal Is Not Responding Randomly?

I have a 95 GMC Vandura 2500 with 91000 miles. Yesterday, I got in my truck in the morning (engine was cold) and started it up. It started up fine and backed out of the driveway fine, but when I put it in drive and pressed on the gas, it was unresponsive. I kept trying the gas and it eventually worked. I kept driving, and it happened a couple more times when I would push on the gas and nothing would happen, and then it would kick in. When the engine warmed up, it seemed to happen less. I need to get this fixed because I'm trying to sell the truck.

View 8 Replies

Nissan - Murano :: 2004 - Gas Pedal Not Responding After Complete Stop

I have a Nissan Murano 2004 SL AWD.I got the car last year and since I got the car, my gas pedal was not working properly during certain condition. You would think my car is haunted, believe me!

The main problem is: after driving for 30 minutes, when I come to a complete stop, my gas pedal does not respond directly. I have to press the gas pedal all the way and release it for the car to start driving.The more I do this process after the problem occurs, the more time the gas pedal will respond after I completely floor it. For example, after 15 minutes of such problem occurring, I need about 2.5 seconds for the gas pedal to work after flooring it. After 30 min of the problem occurring, I need about 3 sec. to 3.5 sec. and on a hill, the respond time takes even longer!

Now here is the funny part...I have notice that whenever it's hot outside, the problem with my gas pedal does not occur after 30 minutes but it will occur after less time, maybe after 15 to 20 minutes of driving.When it's colder like during the winter the problem will occur after 40 minutes of driving.

Here is another funny thing. When my gas pedal start acting up, if I go to park my car and turn my engine off for about... 5 to 10 minutes, less or more, the gas pedal starts working again for the next 10 to 15 minutes before acting up again.

I really want to fix it.It's not bothering me sometimes but today I was at a red light on a hill and my car just did not accelerate at all for about 3 seconds while my car was sliding down and people beeping at me. It's really getting me irritated!

View 8 Replies

Sonata NF (2006-10) :: Throttle Pedal Stopped Responding - CEL Turned On

My car 2006 Sonata GLS 3.3 litre's throttle pedal stopped responding and the check engine light turned on I scanned the codes came back bad TPS and Pedal Position Sensor so I changed both disconnected the positive battery terminal but still no throughout pedal response and I'm getting P2106, P1295, P0638 and pending codes P0222 and P2135. I'm at a complete loss as to what to do.

View 9 Replies

Yaris/Scion & Vitz :: Random No Throttle / Not Responding To Pedal Being Pushed

My girlfriends Toyota Echo has been giving her problems it seems. She says that it will randomly not respond to the pedal being pushed. She's not great with cars, but says she doesn't hear it revving. I was thinking dirty fuel filter, but I would think it would be running rough all the time if it was clogged? What it could be?

View 3 Replies

Camry :: 2006 Toyota Not Responding For Remote Key Programming

I have tried to program 2006 Toyota camry for remote key activation .. but after all the steps completions the locks are not responding to activate the remote key.

Have tried many times as shown in videos but car not responding.

View 3 Replies

Santa Fe (CM - 2007-12) :: 2010 - Remote Start Key Fob Not Responding

Recently my 2010 Santa Fe's remote start key fob is not acknowledging a response for any function on it and there is no blue light activating behind rear view mirror. I figure it has to be something fairly simple since it worked just fine last week. I have two remotes and when buttons are pushed I'm getting bright blue lights on both key fobs so I doubt if both batteries are bad, the factory key fob for door locks still works fine. I've read other posts and I'm aware that there is not many fans of the remote start feature. Its been -30 here in MB for far too long and I need this feature to work for me.

View 2 Replies

Camry :: 2007 V6 SE - Soft Brake Pedal After Maintenance

I have an 07 v6 SE with 220k on the clock. Recently switched out my rear pads with no problem, but still had a small shake under braking - so tonight we pulled the front wheels off and switched the front pads and rotors out - did an oil change while it was there.

On it's first test drive - there's something wrong. The brake pedal travels all the way to the floor and is SUPER soft. It still stops. If I mash the pedal, the car will come to a sharp stop - testing on some sandy roads, the front brakes are definitely working - but the front pedal travel is WAY more than it was prior to the pad/rotor maintenance.

We ran out of light, so tomorrow we're going to get some new fluids and flush the system in case we got air in it.

View 12 Replies

Camry :: Dash Light Or Gauges Not Responding During Harness Installation

The experts who are installing the dash wiring harness on my camry (not exaggeration they really are that good) installed everything perfectly with the exception of the dash not responding. The dash is connected properly but none of the lights nor gauges are reacting. The car turns on and all is good except for this.

View 4 Replies

Camry :: 2007 - Brake Pedal Went Right To The Floor / Hood Won't Open

My brake pedal went right to the floor yesterday. I knew my rear brake was squealing so assumed it was my pads worn out. I went and bought pads. Fronts were half gone, rear was all gone. I couldn't get the rear tire off the back passenger(I even loosened lug nuts and drove up and down street) so only 3 replaced for now. Second time in a row rear brakes wore out well before the fronts.. Well, while that tire(I tighted it up again) soaked in pbblaster I drove it around for the day. Lost brakes again. After a few pumps I gained pressure. In the driveway I pumped and pumped and pumped the brakes.

Eventually I did see the leak all over the driveway. Of course it's on the tire I can't get off. So I checked the brake fluid. It was down but still visible. Closed hood. Then came back to car an hour later and now hood won't open. I had my wife pull the lever inside the car and you can hear it moving under the hood but I can't pop the hood up in order to get my hand under there to release the lever. Is there a trick to open the hood manually? My old dodge stealth had a small hole you could get to with a long screwdriver to open the hood manually. I thought most cars have a trick like that that isn't well published so people can't break into the hood. Does the camry have one? Now what?

View 1 Replies

Camry :: 2007 - Brake Pedal Buzzing A Little Bit When Car Was Almost At A Complete Stop

Bought the car used a few months ago with a little less than 72k miles. At 72k miles, I replaced all brake pads. Car now has 75k miles on it. Wife just got back from a 1k mile road trip with it.

I took it for a little ride, and noticed this problem about 3 times, it doesn't happen every time. There is no vibration or anything when slowing down and stopping. But, a few times, when the car was at, or almost at a complete stop, the brake pedal would feel like it was buzzing a little bit, and I could hear a springy sound. I tried to reproduce it with hard braking, but couldn't. Seemed to only happen with slow, gradual breaking, and when the car was just about at a complete stop. Brake fluid is full. No lights on dash. Asked my wife if she slammed breaks at all, or had any problems, she said no. Then she said she experienced what I did once, when she was at a rest area, stopped

The only thing I can think to compare it to is how the brake pedal feels and sounds if you lock up your brakes, and the ABS is doing its thing....which I haven't ever done with this car...

View 11 Replies

Lexus LS 2007+ :: Climate Control Works Properly Then It Stops Responding

I just bought a very nice Lexus 2007 with a extend warranty from Toyota. This car is a dream to drive but one problem I have encountered, how to fix is the Climate control feature.

Sometimes my unit works properly then it stops responding. The problem I'm having is that the climate control button when pressed wont stay on the control setting on the Nav screen and goes back to the radio station screen.

I also can't control the temp up or down on either driver or passenger side. The only way it works is by using voice commands. I can't turn it off at all. I m going to take to the dealer but they said they never heard so a thing. But I showed the dealer today and he said there is a problem.

View 2 Replies

Toyota - Camry :: 2011 - Rear Door Power Locks Stop Responding

I have a 2011 Camry LE and recently both rear door locks stopped responding to any form whether using the key fob or driver door controls(I have to manual lock and unlock the rear doors)However the rear windows work fine, which indicates the rear doors receiving power. This is really inconvenient. Looking for a clue to what's going on? Only the front doors (driver and front passenger) are operating properly.

View 10 Replies

Camry :: 2007 V6 Running Hot - Radiator Or Water Pump?

I have a 2007 Camry with V6, automatic. My wife drives it daily and she said that a light came on saying water temp and it started to run hot. When I looked at it I could not see fluid anywhere and the reservoir along with the radiator was very low, almost a gallon of fluid to fill it up. I took the shroud from over the top of the radiator and along the top of the radiator and where it meets the fins the pink dried fluid was along it. I could also see where it looks like it's getting onto the electric fan. At first I thought the water pump was going (147K) but now I think it might be the radiator is bad....

View 8 Replies

Camry :: 2007 Running Hot / AC Began To Get Warmer And Temp Gauge At H - Low Fluid

I have a 2007 Camry with the 4 cylinder engine and about 90,000 miles. I just changed the oil and took it for a test drive only to notice about 1/4 mile down the road it was running very hot. My a/c began to get warmer and my temperature gauge was at the "H". I pulled over and it immediately cooled back to normal operating temperature (in the middle of the gauge). The car was left running this entire time and I began my way back to my destination. It never ran that hot again but when I would slow down to an idle I noticed at times it would go up in temperature, but not as hot as before, and go back to normal temperatures. Sometimes during a drive it would fluctuate a little bit, but nothing as much as it would on the very start of running this car cold.

So I opened my hood and looked at the reservoir and noticed I do not see any fluid in there. I guess I should add that I have never flushed or changed the antifreeze b/c I did not know I would need to change it until recently at the 5 year mark. I also notice a little but a pink crystals (about the size of a pencil head) on a bolt at the top left of the engine, right under were the oil cap is. But that is all I noticed. No leak in my driveway or other areas of the engine. I must note that I did the oil change myself and it was nice and black, so from my experience it does not appear to be a head gasket, b/c I would assume it would be milky in color if that was the case.

View 6 Replies

Subaru - Forester :: Intermittent Stalling And Will Only Keep Running If Gas Pedal Gets Pumped

I have a 2003 Subaru Forester, bought it this past January. Got 163,000 miles on it, and we've driven it mostly around town. Over the last month, it has developed an intermittent problem with stalling and rough "putt-putt" running, and will only keep running if the gas pedal gets pumped. This seems to happen about every other time we turn it on, but without a pattern. It can be running fine, and then switch mode, as it were, to running rough and tending to stall. I've gotten ignition codes (check engine light came on and I had my guy check it out on the computer) twice. My mechanic (a long-term Subaru mechanic) has checked out the injectors, and replaced the head gasket, but the problem has not changed. I'm thinking that this may be an electronics issue or possibly something in the gas tank/line.

View 1 Replies

Prius (2004-09) :: ICE Keeps Running Even Though Engine Is Warm And Gas Pedal Not Depressed

I've noticed lately that my Prius (2008) sometimes decides to keep the ICE running even though the engine is warm and the gas pedal is not depressed. I can pulse and glide (with the engine off during glide) the first 5-10 minutes of driving, and then all of a sudden the ICE starts running constantly. I have to press the EV button to be able to glide. Quite annoying... I bought the Prius just to get rid of the ignition jerking.

View 7 Replies

Ford Fuel System :: 1977 - Engine Keep Running With Foot On Pedal?

Have a 1977 ford f150 with 351m with a motorcraft 2150. Had ( who I believe was a reliable source ) rebuild carburetor for me and after putting back on I can only keep engine running with foot on pedal. I turn idle mixture screws all way in and then proceeded to back out equally. This does not appear to be doing anything. I did turn the choke 2 notches to lean and was able to get it to idle but it wasloping so bad i shut it down and put the choke back to the middle setting.

View 13 Replies

Nissan :: 1997 - Growling Noise When Depress The Clutch Pedal With Engine Running

For a little wile now, I have had a growling noise when I depress the clutch pedal with the engine running. It mostly does it when the truck is cold and goes away after a few uses but was getting worse and taking longer to go away. The transmission shifts normally, the clutch operates normally and it does not make the noise if I put the transmission in neutral and let the clutch out. So I'm thinking dry throw out bearing.

I did an oil change Monday, and while it was up on the ramps, I decided to check the transmission oil level, I mean its got a 181k on it so its about time to check, right. Bone dry. I put about 2 qts of gear oil in the transmission that the service manual says has a 4 1/4 pint capacity. I took it out for a drive today and the noise is gone. Go figure.

I only drive the truck one or two times a week, sometimes less so in a couple of weeks I will check the transmission again for a leak, but there was no sign of a leak when I was under there Monday. But is still shifts smoothly, makes no noise.

View 3 Replies